| Development of multifunctional polyurethane elastomer composites containing fullerene: Mechanical, damping, thermal, and flammability behaviors |
17 |
| Review on modification strategies of polyethylene/polypropylene immiscible thermoplastic polymer blends for enhancing their mechanical behavior |
13 |
| Characterization and thermal kinetic analysis of pineapple leaf fibers and their reinforcement in epoxy |
8 |
| Effect of SEBS-g-MAH addition on the mechanical, rheological, and morphological properties of polycarbonate/acrylonitrile-butadiene-styrene blends |
6 |
| Fracture toughness enhancement of carbon fiber-reinforced polymer composites utilizing additive manufacturing fabrication |
6 |
| Investigation of electrical, tracking/erosion, and water absorption resistance properties of ATH-SiO2-reinforced RTV-SiR composites for high-voltage insulations |
5 |
| Nitroxide-mediated graft copolymerization of styrene from cellulose and its polymer/montmorillonite nanocomposite |
5 |
| Mechanical, thermal, and viscoelastic investigations on expanded perlite-filled high-density polyethylene composite |
4 |
| Broad studies of graphene and low-density polyethylene composites |
3 |
| Experimental and theoretical investigations on the viscosity of heterogeneous asphalt binders |
3 |
| Polyurethanes from modified castor oil and chitosan: Synthesis, characterization, in vitro degradation, and cytotoxicity |
3 |
| Tire tread rubber compounds with ternary system filler based on carbon black, silica, and metakaolin: Contribution of silica/metakaolin content on the final properties |
3 |
| Thermal properties of polyurethane elastomers from soybean oil-based polyol with a different isocyanate index |
3 |
| Co-milled silica and coppiced wood biochars improve elongation and toughness in styrene-butadiene elastomeric composites while replacing carbon black |
2 |
| Investigation of the specific adhesion between polyurethane foams and thermoplastics to suited material selection in lightweight structures |
2 |
| Evaluation of the role of carbon nanotubes on the electrical properties of poly(butylene terephthalate) nanocomposites for industrial applications |
2 |
| Chemical modification of nitrile rubber in the latex stage by functionalizing phosphorylated cardanol prepolymer: A bio-based plasticizer and a renewable resource |
2 |
| Microwave absorption of polymer nanocomposites on the base high-density polyethylene and magnetite nanoparticles |
2 |
| Improvement of the creep resistance of glycidyl azide polyol energetic thermoplastic elastomer-based propellant by nitrocellulose filler and its mechanism |
2 |
| Thermoreversible cross-linking of maleated natural rubber with glycerol |
2 |
| An alternative antioxidant for sulfur-vulcanized natural rubber: Henna |
2 |
| Determination of sealing pressure in hyperelastic O-ring with different hardness using numerical method |
2 |
| Detailed comparison of compatibilizers MAPE and SEBS-g-MA on the mechanical/thermal properties, and morphology in ternary blend of recycled PET/HDPE/MAPE and recycled PET/HDPE/SEBS-g-MA |
2 |
| Thermooxidative aging of rubber composites based on NR and NBR with incorporated strontium ferrite |
2 |
| Triblock copolymers-modified SBR/EPDM rubber blends |
2 |
| A fuzzy logic model for prediction of tensile properties of epoxy/glass fiber/silica nanocomposites |
2 |
| The effect of lanthanum trimethacrylate on the mechanical properties and flame retardancy of dynamically vulcanized PP/EPDM thermoplastic vulcanizates |
2 |
| Evaluation of classic and fractional models as constitutive relations for carbon black-filled rubber |
1 |
| Recyclable amitraz-ethylene vinyl acetate strips used for beehives treatment against Varroa destructor |
1 |
| Influence of graphene oxide and multiwalled carbon nanotubes on the dynamic mechanical properties and heat buildup of natural rubber/carbon black composites |
1 |
| Synthesis and characterization of bio-based poly(butylene succinate-co-10-hydroxydecanoate) |
1 |
| Rheological studies of functional polyurethane composite with solid additives: Part 2-Rheology of polyurethane composite with solid additives (calcium iodate particles and aluminum flakes) |
1 |
| Study on the effect of silica-graphite filler on the rheometric, mechanical, and abrasion loss properties of styrene-butadiene rubber vulcanizates |
1 |
| The effect of plasticization on the properties of poly(urethaneureas) based on oligoether diols, 4-toluenediisocyanate, and aromatic diamines |
1 |
| Poly(propylene)/waste vulcanized ethylene- propylene-diene monomer (PP/WEPDM) blends prepared by high-shear thermo-kinetic mixer |
1 |
| Effect of unsaturation on physicochemical properties of maleic anhydride-grafted acrylonitrile butadiene styrene terpolymer |
1 |
| Performance of multilayered LDPE films used as greenhouse cover in semiarid climate |
1 |
| Reclaiming of waste guayule natural rubber vulcanizate-reclaim rubber for green tire applications: An approach for sustainable development |
1 |
| Effect of thermal treatment on the mechanical and viscoelastic response of polypropylenes incorporating a beta nucleating agent |
1 |
| Optimization of welding parameters of hot plate welded PC/ABS blends by using the Taguchi experimental design method |
1 |
| Influence of DMPA content on the properties of new thermoplastic poly(ether-urethane) elastomers |
1 |
| Effect of Diphenyl carbonate derivatives and Cobalt stearate on photo-degradation of low-density polyethylene |
1 |
| Rheological studies of functional polyurethane composite: Part 1. Rheology of polyurethane composite, its compounds with and without solid additives (aluminum flakes) |
1 |
| Thermomechanical and dielectric properties of novel pyridine-based polyurethane urea elastomers |
1 |
| The modification of bitumen with styrene-butadiene-styrene, ethylene vinyl acetate and varying the amount of reactive ethylene terpolymer |
1 |
| Transparency, ultraviolet transmittance, and miscibility of poly(lactic acid)/poly(methyl methacrylate) blends |
1 |
| Proton conducting diazanium hydrogen phosphate/poly(vinyl alcohol) electrolytes: Transport, electrical, thermal, structural, and optical properties |
1 |
| Barium and strontium ferrite-filled composites based on NBR and SBR |
1 |
| Structure and properties of ultrasonically extruded SBR/BR blends and prepared compounds and vulcanizates with various fillers |
1 |
| A strengthening approach for damping property and shape memory property of acrylic rubber/polylactide blends |
1 |
