| Hydrophobic treatment of natural fibers and their compositesA review |
44 |
| Electrospun nanofibre materials to filter air pollutants - A review |
23 |
| Conductive polymers for smart textile applications |
20 |
| Effect of stacking sequence on properties of coconut leaf sheath/jute/E-glass reinforced phenol formaldehyde hybrid composites |
20 |
| Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences |
19 |
| A comparative analysis on tensile strength of dry and moisture absorbed hybrid kenaf/glass polymer composites |
17 |
| Conductive polymer-based electro-conductive textile composites for electromagnetic interference shielding: A review |
14 |
| An experimental study on the effect of nano-clay addition on mechanical and water absorption behaviour of jute fibre reinforced epoxy composites |
14 |
| Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites |
14 |
| Electrospun PU/P(AMPS-GO) nanofibrous membrane with dual-mode hydrophobic-hydrophilic properties for protective clothing applications |
11 |
| Effect of stacking sequence on tensile, flexural and thermomechanical properties of hybrid flax/glass and jute/glass thermoset composites |
10 |
| Development, characterization and thermal performance of insulating nonwoven fabrics made from textile waste |
10 |
| The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy |
9 |
| Coaxial nanofibers from poly(caprolactone)/poly(vinyl alcohol)/Thyme and their antibacterial properties |
9 |
| The influence of fiber content and length on mechanical and water absorption properties of Calotropis Gigantea fiber reinforced epoxy composites |
9 |
| Breathable-windproof membrane via simultaneous electrospinning of PU and P(AMPS-GO) hybrid nanofiber: Modeling and optimization with response surface methodology |
9 |
| Reduced graphene oxide/TiO2 nanocomposites coating of cotton fabrics with antibacterial and self-cleaning properties |
9 |
| Characterization of Areva javanica fiber - A possible replacement for synthetic acrylic fiber in the disc brake pad |
8 |
| Zinc oxide nano particles coating on polyester fabric functionalized through alkali treatment |
8 |
| Thermal and compression characteristics of aerogel-encapsulated textiles |
8 |
| Advances and applications of chemical protective clothing system |
7 |
| Through-the-thickness reinforcement for composite structures: A review |
7 |
| Innovative wool geotextiles designed for erosion protection |
7 |
| Effect of alkali and enzymatic treatments of banana fibre on properties of banana/polypropylene composites |
7 |
| Effect of fixation stitches on out-of-plane response of textile non-crimp fabric composites |
7 |
| Characteristics of aloe vera incorporated poly(epsilon-caprolactone)/gum tragacanth nanofibers as dressings for wound care |
7 |
| Development and mechanical properties of adaptive fiber-reinforced plastics |
7 |
| Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates |
6 |
| Experimental and numerical comparisons of ballistic impact behaviors between 3D angle-interlock woven fabric and its reinforced composite |
6 |
| Experimental investigation and optimization of abrasive water jet cutting parameters for the improvement of cut quality in carbon fiber reinforced plastic laminates |
6 |
| Mechanical behavior of woven natural fiber fabric composites: Effect of weaving architecture, intra-ply hybridization and stacking sequence of fabrics |
6 |
| Analysis of electrical, thermal and compressive properties of alkali-treated jute fabric reinforced composites |
6 |
| Development of a flame retardant chemical for finishing of cotton, polyester, and CO/PET blends |
6 |
| Design parameters for electrospun biodegradable vascular grafts |
5 |
| Optimization of alkali treatment condition on jute fabric for the development of rigid biocomposite |
5 |
| Hydroentangled nonwoven eri silk fibroin scaffold for tissue engineering applications |
5 |
| Analysis of comfort and moisture management properties of polyester/milkweed blended plated knitted fabrics for active wear applications |
5 |
| The properties of bioactive substances obtained from seaweeds and their applications in textile industries |
5 |
| Copper coated multifunctional cotton fabrics |
5 |
| Appraisal of electrospun textile scaffold comprising polyurethane decorated with ginger nanofibers for wound healing applications |
5 |
| Survival capability of healthcare-associated, multidrug-resistant bacteria on untreated and on antimicrobial textiles |
5 |
| Optimization of 3D woven preform for improved mechanical performance |
5 |
| Physico-mechanical and erosive wear analysis of polyester fibre-based nonwoven fabric-reinforced polymer composites |
5 |
| Investigations on oil sorption capacity of nettle fibrous assembly and 100% nettle and nettle/kapok blended needle-punched nonwovens |
5 |
| Development of polyester needle-punched nonwoven fabrics for filter press applications |
5 |
| Investigation of sound absorption properties of nonwoven webs produced from chicken feather fibers |
5 |
| Moisture-management properties of bi-layer knitted fabrics for sportswear |
4 |
| Fracture failure analysis and bias tearing strength criterion for a laminated fabric |
4 |
| Statistics-based full-scale three-dimensional geometric model and fiber length distribution for carbon fiber needled felt |
4 |
| Comparative study of mechanical characteristics of recycled PET fibres for automobile seat cover application |
4 |
