| Deep Scatter Estimation (DSE): Accurate Real-Time Scatter Estimation for X-Ray CT Using a Deep Convolutional Neural Network |
11 |
| An Effective Method to Inspect Adhesive Quality of Wind Turbine Blades Using Transmission Thermography |
10 |
| Role of Signal Processing, Modeling and Decision Making in the Diagnosis of Rolling Element Bearing Defect: A Review |
9 |
| On-line Time Domain Vibration and Current Signals Based Multi-fault Diagnosis of Centrifugal Pumps Using Support Vector Machines |
7 |
| Analysis of Acoustic Emission Propagation in Metal-to-Metal Adhesively Bonded Joints |
6 |
| Acoustic Emission from Microcrack Initiation in Polymer Matrix Composites in Short Beam Shear Test |
6 |
| Acoustic Emission-Based Methodology to Evaluate Delamination Crack Growth Under Quasi-static and Fatigue Loading Conditions |
6 |
| Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise |
6 |
| Damage Evaluation in Woven Glass Reinforced Polyamide 6.6/6 Composites Using Ultrasound Phase-Shift Analysis and X-ray Tomography |
6 |
| An Improved Longitudinal Mode Guided Wave Received Sensor Based on Inverse Magnetostrictive Effect for Open End Pipes |
6 |
| Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method |
6 |
| Evaluation of Different Non-destructive Testing Methods to Detect Imperfections in Unidirectional Carbon Fiber Composite Ropes |
6 |
| Detection of Delaminations in Sunlight-Unexposed Concrete Elements of Bridges Using Infrared Thermography |
5 |
| A Comprehensive Study on Detection of Hidden Delamination Damage in a Composite Plate Using Curvatures of Operating Deflection Shapes |
5 |
| A Novel RFID-Based Strain Sensor for Wireless Structural Health Monitoring |
5 |
| More than Fifty Shades of Grey: Quantitative Characterization of Defects and Interpretation Using SNR and CNR |
5 |
| Non-destructive Damage Detection in Fibre Metal Laminates |
5 |
| Material Decomposition in X-ray Spectral CT Using Multiple Constraints in Image Domain |
4 |
| Detectability of Subsurface Defects with Different Width-to-Depth Ratios in Concrete Structures Using Pulsed Thermography |
4 |
| Measurement of Interfacial Fracture Toughness of Surface Coatings Using Pulsed-Laser-Induced Ultrasonic Waves |
4 |
| Parameter Optimization of Robotize Line Scan Thermography for CFRP Composite Inspection |
4 |
| Impact Modelling and A Posteriori Non-destructive Evaluation of Homogeneous Particleboards of Sugarcane Bagasse |
4 |
| Pulsed Phase Thermography Approach for the Characterization of Delaminations in CFRP and Comparison to Phased Array Ultrasonic Testing |
4 |
| Three Dimensional Characterization of Defects by Ultrasonic Time-of-Flight Diffraction (ToFD) Technique |
4 |
| Performance Based Modifications of Random Forest to Perform Automated Defect Detection for Fluorescent Penetrant Inspection |
4 |
| Effect of Thickness and Denting Behavior of Glass/Epoxy Laminates Subjected to Quasi-Static Indentation (QSI) Loading Under Acoustic Emission Monitoring |
4 |
| Evaluation of Acoustic Emission Source Location in Long Steel Pipes for Continuous and Semi-continuous Sources |
4 |
| Practical Aspects of Nondestructive Induction Field Testing in Determining the Depth of Steel and Reinforced Concrete Foundations |
4 |
| Introduction of a Surface Characterization Parameter Sdr(prime) for Analysis of Re-entrant Features |
4 |
| Non-destructive Method for Evaluating Grouted Ratio of Soil Nail Using Electromagnetic Wave |
4 |
| Monitoring of Stresses in Concrete Using Ultrasonic Coda Wave Comparison Technique |
4 |
| Towards Automated Tracking of Initiation and Propagation of Cracks in Aluminium Alloy Coupons Using Thermoelastic Stress Analysis |
4 |
| A Multi-scale Fuzzy Measure Entropy and Infinite Feature Selection Based Approach for Rolling Bearing Fault Diagnosis |
4 |
| Phased Array Ultrasonic Inspection of Metal Additive Manufacturing Parts |
4 |
| Structural Health Monitoring System for Remote Inspection of Material Failure |
4 |
| Imaging of Near-Surface Defects using Microwaves and Ultrasonic Phased Array Techniques |
4 |
| Non-destructive Evaluation and Development of a New Wire Rope Tester Using Parallely Magnetized NdFeB Magnet Segments |
4 |
| A New Micro Magnetic Bridge Probe in Magnetic Flux Leakage for Detecting Micro-cracks |
4 |
| Automated Air-Coupled Impact-Echo Testing of a Concrete Bridge Deck from a Continuously Moving Platform |
4 |
| Characterization of Liquids Using Electrical Properties in Microwave and Millimeter Wave Frequency Bands |
4 |
| New Approach for Verifying the Accuracy of X-ray Computed Tomography Measurements of Surface Topographies in Additively Manufactured Metal Parts |
4 |
| Metal Magnetic Memory Inspection of Q345 Steel Specimens with Butt Weld in Tensile and Bending Test |
3 |
| A Correlation-Based Approach to Corrosion Detection with Lamb Wave Mode Cutoff |
3 |
| Evaluation of Meso-damage Processes in Concrete by X-Ray CT Scanning Techniques Under Real-Time Uniaxial Compression Testing |
3 |
| Pulsed Eddy Current Data Analysis for the Characterization of the Second-Layer Discontinuities |
3 |
| Detection and Characterization of Randomly Distributed Micro-cracks in Elastic Solids by One-Way Collinear Mixing Method |
3 |
| Transient Eddy Current NDE System Based on Fluxgate Sensor for the Detection of Defects in Multilayered Conducting Material |
3 |
| Water Migration in One-Side Heated Concrete: 4D In-Situ CT Monitoring of the Moisture-Clog-Effect |
3 |
| Characterization of Aging Treated 6061 Aluminum Alloy Using Nonlinear Rayleigh Wave |
3 |
| A Modified Time Reversal Method for Guided Wave Based Bolt Loosening Monitoring in a Lap Joint |
3 |
