| Banana and plantain fiber-reinforced polymer composites |
11 |
| Foam rubber from centrifuged and creamed latex |
8 |
| Interpenetrating polymer network adhesive bonding of PEEK to titanium for aerospace application |
7 |
| Evaluation of polypropylene hybrid composites containing glass fiber and basalt powder |
7 |
| Separation of CO2/CH4 and O-2/N-2 by polysulfone hollow fiber membranes: effects of membrane support properties and surface coating materials |
6 |
| Preparation and properties of biodegradable polymer/nano-hydroxyapatite bioceramic scaffold for spongy bone regeneration |
6 |
| Structural, optical, and aging studies of biocompatible PVC-PVP blend films |
6 |
| An attempt to correlate the physical properties of fossil and subfossil resins with their age and geographic location |
5 |
| Conductive mechanism of carbon black/polyimide composite films |
5 |
| Effects of MAH/St grafted nanocellulose on the properties of carbon reinforced styrene butadiene rubber |
5 |
| Optimization of process parameters in plastic injection molding for minimizing the volumetric shrinkage and warpage using radial basis function (RBF) coupled with the k-fold cross validation technique |
5 |
| Preparation, characterization and kinetics study of chitosan/PVA electrospun nanofiber membranes for the adsorption of dye from water |
4 |
| Influence of the polyacrylonitrile proportion on the fabricated UF blend membranes' performance for humic acid removal |
4 |
| A molecular modeling study for miscibility of polyimide/polythene mixing systems with/without compatibilizer |
4 |
| Tribological and mechanical properties of polyamide-11/halloysite nanotube nanocomposites |
4 |
| Effects of partial replacement of carbon black with nanocrystalline cellulose on properties of natural rubber nanocomposites |
4 |
| Swelling behavior of poly (N-hydroxymethyl-acrylamide-co-acrylic acid) hydrogels and release of potassium nitrate as fertilizer |
4 |
| Morphology, rheology and biodegradation of oxo-degradable polypropylene/polylactide blends |
4 |
| Rheological properties and crystallization behaviors of long chain branched polyethylene prepared by melt branching reaction |
4 |
| Recycling waste tire rubber by water jet pulverization: powder characteristics and reinforcing performance in natural rubber composites |
4 |
| Frequency independent AC electrical conductivity and dielectric properties of polyaniline-based conductive thermosetting composite |
4 |
| Chitosan surface modified PLGA nanoparticles loaded with brigatinib for the treatment of non-small cell lung cancer |
4 |
| Ultrasonic measurement of clamping force for injection molding machine |
4 |
| Correlation between fiber orientation distribution and mechanical anisotropy in glass-fiber-reinforced composite materials |
3 |
| Effects of calcium stearate as pro-oxidant agent on the natural aging of polypropylene |
3 |
| Creep and dynamic mechanical behavior of cross-linked polyvinyl alcohol reinforced with cotton fiber laminate composites |
3 |
| Natural rubber/tetra-needle-like zinc oxide whisker composites: their preparation and characterization |
3 |
| Ibuprofen loaded nano-ethanolic liposomes carbopol gel system: in vitro characterization and anti-inflammatory efficacy assessment in Wistar rats |
3 |
| Mechanical and morphological properties of modified halloysite nanotube filled ethylene-vinyl acetate copolymer nanocomposites |
3 |
| A mathematical analysis for the blade coating process of Oldroyd 4-constant fluid |
3 |
| Thermoelectric behavior of PEDOT:PSS/CNT/graphene composites |
3 |
| Effect of addition of silicone oil on the rheology of fumed silica and polyethylene glycol shear thickening suspension |
3 |
| Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears |
3 |
| NanoSiO(2), strengthens and toughens epoxy resin/basalt fiber composites by acting as a nano-mediator |
3 |
| Effects of surface modification of halloysite nanotubes on the morphology and the thermal and rheological properties of polypropylene/halloysite composites |
3 |
| Effect of gamma irradiation on the physicochemical and rheological properties of enzyme-catalyzed tragacanth-based injectable hydrogels |
3 |
| Study on structures and properties of ultra-hot drawing UHMWPE fibers fabricated via dry spinning method |
2 |
| Electric field-induced alignment of MWCNTs during the processing of PP/MWCNT composites: effects on electrical, dielectric, and rheological properties |
2 |
| Investigation of the properties of polystyrene-based wood plastic composites: effects of the flame retardant loading and magnetic fields |
2 |
| Antimicrobial gelatin/sericin/clay films for packaging of hygiene products |
2 |
| A numerical analysis of calendering of Oldroyd 4-constant fluid |
2 |
| Thermal degradation kinetics of oxo-degradable PP/PLA blends |
2 |
| Thermal stability of xanthan gum biopolymer and its application in salt-tolerant bentonite water-based mud |
2 |
| Highly electrically conducting poly(L-lactic acid)/graphite composites prepared via in situ expansion and subsequent reduction of graphite |
2 |
| Polyaniline enfolded hybrid carbon array substrate electrode for high performance supercapacitors |
2 |
| Development of NIPAAm-PEG acrylate polymeric nanoparticles for co-delivery of paclitaxel with ellagic acid for the treatment of breast cancer |
2 |
| Experimental and theoretical investigations of the high performance blends of PEEK/PEI |
2 |
| Electrospinning of poly(lactic acid)/polycaprolactone blends: investigation of the governing parameters and biocompatibility |
2 |
| The non-isothermal crystallization behavior of polyamide 6 and polyamide 6/HDPE/MAH/L-101 composites |
2 |
| Study of the rheology and foaming processes of poly(vinyl chloride) plastisols with different foaming agents |
2 |
