| Solid Transportation in a Coil-Shaped Rotating Spiral Gas-Solid Contacting Device |
4 |
| Kinetic Study of Hydrothermal Leaching of Lithium Cobalt Oxide with Citric Acid |
3 |
| Supercritical Carbon Dioxide Regeneration of Activated Carbon for Exhaust Processing |
2 |
| Fluorescent Properties of Fluorescein and Rhodamine B in Cyclodextrin-Based Metal-Organic Framework |
2 |
| Eutectic Composition of a Salt Hydrate Mixture of Sodium Carbonate and Disodium Hydrogen Phosphate |
2 |
| Life Cycle Assessment of Resource Recovery from Waste Electrical and Electronic Equipment: A Case Study of Tantalum Recovery by Chain-Using Drum-Typed Impact Mill |
2 |
| Electroless Nickel-Phosphorus Plating under High Pressure |
2 |
| Performance Test for Scale-Up Characteristics of Adsorption Steam Generators |
2 |
| A Common Property of Melting Point Depression in Inorganic Salt Hydrate Melt Systems |
2 |
| Numerical Study of Bead Milling by the Advanced DEM-CFD Method |
1 |
| Improvement in Settling Performance of Disrupted Sludge by Stepwise Addition of Inorganic Salts |
1 |
| Study on Particle Surface Modification Using a Spouted Bed Plasma Reactor |
1 |
| Bubble Point Pressure and Some Dielectric Properties of Propane plus Ethanol Liquid Mixture at 303.2 K |
1 |
| Range of Particle Properties Inducing Defluidization after Gas Switching in a Fluidized Bed |
1 |
| Implementation Analysis of Bagasse Power Plants Considering Technology Options on Sugarcane Cultivars and Power Plants |
1 |
| Sampled-data I-P Controller Design for Integrating Processes Based on Model Predictive Control Theory |
1 |
| Impact of Thickness of Polymer Electrolyte Membrane and Gas Diffusion Layer on Temperature Distribution in Single Polymer Electrolyte Fuel Cell Operated at High Temperature |
1 |
| Development of Crystallization Processes Using the COSMO-RS Method |
1 |
| Estimation of Just-Suspension Speed with CFD |
1 |
| A Study of the Stability of Magnetorheological Fluids Prepared with Newly Synthesized Organogelators |
1 |
| Influence of Heat Treatment in Exhaust Treatment Process on Activated Carbon Regeneration using Supercritical Carbon Dioxide |
1 |
| Co-pyrolysis of Bio-Dried Sludge and Coal in a Rotary Kiln Carbonaizer |
0 |
| Effect of Repeated Recycling on Properties of Carbon Fiber |
0 |
| Size-Controlled Preparation of Monodisperse Microbubbles using Co-Flow Glass Capillary Microfluidic Device |
0 |
| Supercritical Carbon Dioxide Extraction from Coffee Residue and Production of Fatty Acid Ester with Enzyme |
0 |
| Backflow Rate and Exchange Rate of Liquid in a Vertical Stirred Vessel with Three Multiple Impellers |
0 |
| Development of Glass-Lined HB Impeller |
0 |
| Gold Ion Adsorption on Chitosan Membrane and Separation and Recovery from the Membrane as Gold Nanoparticles |
0 |
| Performance Evaluation System for Industrial Plants using the ART2 Network That Considers Cluster Size |
0 |
| Growth of a Pinhole Generated on a Coated Film of Adhesives |
0 |
| Dispersion Behavior of Surfactant-Free W/C Emulsion in High Reynolds Number Turbulent Flow Fields |
0 |
| Effects of Azimuthal Angle of Aeration Hole and Liquid Viscosity on Flows Inside and Outside an Air Diffuser Pipe |
0 |
| Preparation of Soluble Peptide from Defatted Soybean in the Presence of Base Additives in Hydrothermal Condition and Evaluation of its Function |
0 |
| Analysis of the Reaction Process in the Formation of Lanthanum Nickel Oxide via a Mechanochemical Route |
0 |
| Measurement and Prediction of Liquidus Curves of Saturated Fatty Acids and Triglycerides Plus Fuel Oil A Systems |
0 |
| Change in Zeta Potential of Calcium Carbonate during Reactive Crystallization |
0 |
| Prediction of Particle Size Distribution by Use of a Model of Precipitation by Collision and Coagulation |
0 |
| Crystallizing Concentration of the Diatom Chaetoceros gracilis Cell Solutions |
0 |
| Influences of Kinds of Mechanical Energies on Solid-State Polymorphic Transition Rates for Glycine Crystals |
0 |
| Effect of Salt Addition on Supercooling Property of Erythritol |
0 |
| Eutectic Formation from Melt Mixtures of Hydrates of Nickel and Cobalt Salts |
0 |
| Effect of Fe and Mg Components on Dissolution Rate of CaO Particles into CaO-SiO2-Al2O3 Molten Slag |
0 |
| Findings of New Heat Storage Materials and Its Evaluation of Thermo-Physical Properties for Developing a Heat Exchange System with Multistage Latent Heat Storage |
0 |
| Measurement and Correlation of High Pressure Vapor-Liquid Equilibria in CO2-Ethanol-Essential Oil Ternary Systems Applied to Supercritical Counter-Current Extractions |
0 |
| Quick Evaluation Method of Streak Line Pattern in Mixing Vessel Based on Unsteady State Two dimensional Analysis |
0 |
| Simplified Structure Design of Nonlinear Solid Ratio Control in Slurry Mixing Tank |
0 |
| Pyrolysis of Waste Plastics for Heavy Oil Production |
0 |
| Microscale Incorporation of Elemental Cu from the Roller during Splat Cooling of Amorphous Metal Ribbon |
0 |
| Continuous Esterification using Lipase-Entrapped Amphiphilic Copolymeric Gel Beads |
0 |
| Kinetic Analysis and Reaction Mechanism of Hydrothermal Hydrolysis of Rapeseed Hulls to Produce Polyphenols |
0 |
