| Green EPDM Compounds |
3 |
| Effect of solvent Extractions on a linear Combination fitting in sulfur K-edge X-ray Absorption near edge structure Spectroscopy for Sulfur cross-linked Rubber |
2 |
| The analysis of Aging Processes of EPDM Elastomers using low field NMR with Inverse Laplace Transform and Stress Relaxation Measurements |
2 |
| Ionic conductivity and mechanical Properties of ionic Liquids incorporated PMMA based Polymer Electrolytes |
2 |
| Preparation and Characterization of CMC/HA-NPs/pulp Nanocomposites for the removal of heavy Metal Ions |
2 |
| Photo-triggered Self-Healing of Elastomers |
2 |
| Mechanical and electrical Properties of SBR Composite filled with modified Magnesium Hydroxide by functionalized ionic Liquid |
2 |
| Development of High Temperature Resistant Coolant Hose Compounds with EPDM |
1 |
| Identification of VOCs generated by natural and synthetic Polymers |
1 |
| The Production and mechanical Properties of carburized Corn Cob Ash added Rubber Compounds |
1 |
| Role of Graphene nano Platelets in Enhancing Properties for CNT-CB Filled Poly (4-cis-isoprene) based Rubber Nanocomposites |
1 |
| Influence of fillers on the mechanical and tribological properties of acrylo-nitrile-butadiene-vulcanisates (NBR) |
1 |
| Void Volume Measurement - an alternative Approach to Determine the Initial Structure of Silica |
1 |
| Finite Element Models for textile reinforced Rubber Components |
1 |
| Investigation of Wall Slippage in Silicone Rubber Compound by means of High-pressure Capillary Rheometer |
1 |
| Review - Characterization of modified Elastomer Surfaces by wetting |
1 |
| The Effect of Boundary Conditions on the Failure Behavior of Rubber Vulcanizates under Tensile Deformation |
1 |
| Innovative Nanocomposites with enhanced Barrier Properties |
1 |
| Burst Test Simulation for bias Truck Tire |
1 |
| Improvement of laboratory predictions regarding crack propagation and wear of truck tire treads |
1 |
| Effects of the Extrusion Parameters of a Co-Rotating Twin Screw Extruder and their Interactions on the Properties of Carbon Black filled Styrene-Butadiene Rubber |
1 |
| Improved Compatibility between Silica and natural Rubber by the use of Carbonyl-terminated low Molecular-Weight natural Rubber |
1 |
| Preparation of In Situ Silica filled natural Rubber by Sol-Gel Reaction of Sodium Silicate in natural Rubber Latex |
1 |
| Use of natural Oils as potential Additives in filled Rubber Compounds for antistatic Applications |
1 |
| Approach for additive Manufacturing of high-viscosity, curable Rubbers by AME Processing (Additive Manufacturing of Elastomers) - Rubber 3D |
1 |
| New Compounding Concepts based on very high Molecular weight EPDM - the Development of Keltan 13561C |
0 |
| Oscillating Buckling Dynamometry (OBD) of textile reinforced Rubber Laminates |
0 |
| Crystallization Behavior and mechanical Property of epoxidized natural Rubber/Poly(lactic acid) Blend |
0 |
| Thermoplastic Blends based on Waste Tyre Rubber and Polyamide 12 |
0 |
| Adhesion of Rubber on smooth and rough Surfaces |
0 |
| Erosion of Glass Fibre reinforced Epoxy Composites |
0 |
| Urethane Formation Reaction in Oligodienes Obtained in Solutions of Alcohols under the Action of Hydrogen Peroxide |
0 |
| Determination of the Crosslink Density of Tire Tread Compounds by Different Analytical Methods |
0 |
| Determination of Aging behavior of natural Rubber Nanocomposites reinforced with Mica prepared by Latex or Melt mixing Technology |
0 |
| An Inductive Heating Method for Manufacturing of Plastic I Metal Composites in Application for Splices of Steel Cord Conveyor Belts - Part 2 |
0 |
| An Inductive Heating Method for Manufacturing of Plastic Metal Composites in Application for Splices of Steel Cord Conveyor Belts - Part 1 |
0 |
| Comparison of different Methods for Investigation of Crack Length in Photos of cracked planar Elastomer Specimen |
0 |
| Physical Properties of recycled Latex Glove / Epoxidized natural Rubber Blend: Effect of natural graft Starch |
0 |
| Rubber Sealing Performance Analysis - Comparison of Testing Techniques |
0 |
| Wall-slip effects and their dependence on the recipe- and molecular-weight-induced compound viscosity |
0 |
| Matching processability, Performance and Sustainability in SBR Compounds |
0 |
| Properties of Natural and Styrene Butadiene Rubbers with Butadiene Rubber Blends I |
0 |
| Ozone-Resistivity of Isoprene Rubber mixed with a Wax as an Antiozonant at below Freezing |
0 |
| Long-therm stability of the silicatization and the influence on the adhesion properties between liquid silicone rubber (LSR)-thermoplastic composites |
0 |
| Efficient Material Parameter Calibration of Elastomer Specimen in uniaxial Tension, planar Shear and equibiaxial Tension |
0 |
| Reducing electrostatic Charge generated on Polymeric Floor in Hospitals |
0 |
| Finite Element Simulation of the Rubber Mechanical Behaviour due to thermomechanical Ageing |
0 |
| FEM Implementation of elastomeric stress softening |
0 |
| Meeting Place for reliable Partners |
0 |
| Efficient framing of Car-Window Glass |
0 |
