| Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution |
7 |
| Rapid Sintering of Nanocrystalline (W,Ti)C-Graphene Composites |
5 |
| Effect of BN Addition on the Mechanical Properties of AlN |
5 |
| Comparison of the Hydrogen Release Properties of Zn(BH4)(2)-Added MgH2 Alloy and Zn(BH4)(2) and Ni-Added MgH2 Alloy |
4 |
| Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution |
4 |
| Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy |
4 |
| Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling |
4 |
| Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling |
3 |
| Potential of Ruthenium and Cobalt as Next-generation Semiconductor Interconnects |
3 |
| Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications |
3 |
| Hydrogen Uptake and Release Characteristics of Mg-xTaF(5)-xVCl(3) (x=1. 2. and 5) |
3 |
| Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel |
3 |
| Effect of of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting |
3 |
| Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel |
3 |
| Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling |
3 |
| Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint |
3 |
| Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere |
3 |
| Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test |
3 |
| Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process |
3 |
| Effects of Zn(BH4)(2), Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 |
3 |
| MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution |
3 |
| Characterization of Viscoelastic Behavior of Poly(dimethylsiloxane) by Nanoindentation |
3 |
| Optimization of Flexible, Transparent TiO2/Cu/ZnO Electrodes by Simultaneous Suppression of Optoelectrical Losses and Pinhole Formation |
2 |
| Property Evaluation of Binderless-WC Hard Materials as a Function of Sintering Temperature |
2 |
| Influence of Film Thickness on the Electrical and Optical Properties of ZnO/Ag/SnO2 Tri-Layer Films |
2 |
| Electronic Transport and Thermoelectric Properties of Cu12-xZnxSb4S13 Tetrahedrites Prepared by Mechanical Alloying and Hot Pressing |
2 |
| Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets |
2 |
| Effect of Alloying Concentration and Crystal Structure on an Anodic Oxide Layer Formed on Ti-Ni Alloy |
2 |
| Effect of Cr Electroplating Layer Thickness on the Tensile and High Cycle Fatigue Properties of AISI 1045 Steel |
2 |
| Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling |
2 |
| Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex Its Mixture and Ionic Liquid |
2 |
| Corrosion Resistance and Adhesion of Paint Coating Film on Zn-Mg-Al Hot-Dip Galvanized Steel Sheets |
2 |
| Influence of the Thickness of TiO2/TiO2-x Layers on the Behavior of a Memristor Device |
2 |
| Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering |
2 |
| Effect of Additives on the Sand Burning of Inorganic Binder in Al-Si7Mg Alloy Casting |
2 |
| Growth Rate of Gamma Prime Precipitates in Ni-Base Superalloy |
2 |
| Effect of Carbon Addition and Recrystallization on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys |
2 |
| Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel |
2 |
| Microwave Absorbing Properties of Carbonyl Iron Particle Composites with Frequency Selective Surface |
2 |
| Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel |
2 |
| Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film |
2 |
| Effect of Cu/In Doping on The Thermoelectric Transport Properties of Bi-Sb-Te Alloys |
2 |
| Effects of Molybdenum on HIC Susceptibility in Normalized Pressure Vessel Steels for Sour Service Applications |
2 |
| Microstructure Evaluation and Low Cycle Fatigue Damage due to Degradation of Ni-based Superalloy |
2 |
| Eco-Friendly Pretreatment of Titanium Turning Scraps and Subsequent Preparation of Ferro-Titanium Ingots |
2 |
| Effect of Annealing Temperature on the Shape Memory Properties of Ti-44.5Ni-5Cu and Ti-45.2Ni-5Cu(at%) Alloys |
2 |
| Up- and Downconversion Luminescence in Ho3+,Yb3+-Co-Doped Y2O3 Transparent Ceramics Prepared by Spark Plasma Sintering |
2 |
| Thermoelectric Transport Properties of Interface-Controlled n-type Bismuth Telluride Selenide Composites by Reduced Graphene Oxide |
2 |
| Photocatalytic Characterization of TiO2 Nanotubes with Pd Particles Synthesized by Photoreduction Process |
2 |
| Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition |
2 |
