| Investigation of microstructure and mechanical properties of titanium alloy sheet using low power Nd-YAG laser welding process |
5 |
| Effect of Al content on microstructure of Ti-Al-Nb-C-Mo composites reinforced with carbide particles |
5 |
| Characterization of phase development in commercial Al-Zn-Mg(-Mn,Fe) alloy with and without Sc,Zr-addition |
5 |
| Erosion wear evaluation of HVOF sprayed WC-12Co coating on some pipeline materials using Taguchi approach |
4 |
| Effects of cryogenic treatment on residual stresses of AISI D2 tool steel |
4 |
| Study of mechanical, microstructural and thermal stability properties of friction stir processed aluminum 2024-T3 alloy |
4 |
| WE43 magnesium alloy - material for challenging applications |
3 |
| Grain refinement of cast peritectic TiAl-based alloy by solid-state phase transformations |
3 |
| High-resolution transmission electron microscopy investigation of in situ TiC/Al composites |
3 |
| Mechanical and microstructural behaviour of wear resistant coatings on cast iron lathe machine beds and slides |
3 |
| Effect of carbon on the room temperature compressive behaviour of Ti-44.5Al-8Nb-0.8Mo-xC alloys prepared by vacuum induction melting |
3 |
| Influence of alloying elements on gas nitriding process of high-stressed machine parts of weapons |
3 |
| The tribocorrosion behavior of Ni-P and Ni-P-ZrO2 coatings |
3 |
| Structures of coatings obtained in a ZnA123Mg3Si0.4 bath by the batch hot dip method |
2 |
| Investigations on small-scaled welded structures of austenitic stainless steel |
2 |
| Material and technological investigation of machined surfaces of the OCHN3MFA steel |
2 |
| Microstructural aspects of laser surface treatment of commercially pure titanium |
2 |
| Improving mechanical properties of AlSi10Mg aluminum alloy using ultrasonic melt treatment combined with T6 heat treatment |
2 |
| Wear performance of ductile iron after electrolytic plasma hardening |
2 |
| In-situ compaction and sintering of Al2O3-B4C composites by using a High-Frequency Induction System |
2 |
| Microstructure evolution of fibre laser welded TRIP and HSLA steel sheets with different thicknesses |
2 |
| Small punch creep of Fe-Al-Cr alloy with Ce addition and its relation to uniaxial creep tests |
2 |
| The influence of chill thickness and austempering temperature on dry sliding wear behaviour of a Cu-Ni carbidic austempered ductile iron (CADI) |
2 |
| Characterization of aluminium metal matrix composite fabricated by gas injection bottom pouring vacuum multi-stir casting process |
2 |
| Investigation of latent heat of melting and thermal conductivity of the low-melting Bi-Sn-Zn eutectic alloy |
1 |
| Mechanical and wear properties of Mg/Mo nanocomposites |
1 |
| Effect of shielding gas on the properties of CP titanium Grade 2 laser weld joints |
1 |
| Enhancing compressive response of Mg-6Al alloy using Al2O3 nanoparticles |
1 |
| Characterization of Al-4.5%Cu alloy with the addition of silicon carbide and bamboo leaf ash |
1 |
| On the groove pressing of Ni-W alloy: microstructure, texture and mechanical properties evolution |
1 |
| Influence of current type on tribological and corrosion properties of nickel boron coatings produced by electrodeposition |
1 |
| Effects of C and N additions on primary MAX phase particles in intermetallic Ti-Al-Nb-Mo matrix in-situ composites prepared by vacuum induction melting |
1 |
| Experimental research and ANN modeling on the impact of the ball burnishing process on the mechanical properties of 5083 Al-Mg material |
1 |
| Application of the molecular interaction volume model to the assessment of thermodynamic properties of liquid Zn-Bi alloys |
1 |
| The effect of pure argon and mixed gases on microstructural and mechanical properties of S275 structural steel joined by flux-cored arc welding |
1 |
| Hydrogen absorption in carbon allotropes and talc |
1 |
| Anti-corrosion systems in vehicles for the transportation and application of fertilizers |
1 |
| Austenite grain growth behavior and its effects on fracture splitting performance of 36MnVS4 connecting rod for automobile engine |
1 |
| Microstructure and mechanical properties of extruded profiles made from pure magnesium powders |
1 |
| High-temperature deformation properties of CuCr0.6 alloy |
1 |
| Structure of Pd-Zr and Pt-Zr modified aluminide coatings deposited by a CVD method on nickel superalloys |
1 |
| The effects of welding speed on the microstructure and mechanical properties of marine-grade aluminium (AA5754) alloy joined using MIG welding |
1 |
| Kinetics of dislocation emission in 3D: from the crack toward the free surface |
1 |
| Cr cluster characterization in Cu-Cr-Zr alloy after ECAP processing and aging using SANS and HAADF-STEM |
1 |
| The effects of CO2 laser and thulium-doped fibre laser scribing on magnetic domains structure, coercivity, and nanohardness of Fe-3.2Si grain-oriented electrical steel sheets |
1 |
| Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading |
1 |
| Tunnel growth mechanism of aluminum foils during etching on corrosion cell |
1 |
| Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique |
0 |
| Performance of Fe-based hardfacings on hot forging die: experimental, numerical and industrial studies |
0 |
| Microstructural characteristics of fibre laser welded joint of dual phase steel with complex phase steel |
0 |
