| Octagonal Shaped Metamaterial Absorber Based Energy Harvester |
6 |
| Effects of Milling Time on the Hydrogen Storage Properties of Mg-based Transition Metals-added Alloys |
3 |
| A Phosphorus-Nitrogen Flame-retardant: Synthesis and Application in Cotton Fabrics |
3 |
| Experimental Study on the Thermal Decomposition of Two Nitrocellulose Mixtures in Different Forms |
3 |
| Effects of Crushed Oyster Shell on Strength and Durability of Marine Concrete Containing Fly Ash and Blastfurnace Slag |
3 |
| Mechanical and Thermal Properties of Electrospun PMIA Nanofibers Reinforced PLA Composites |
3 |
| Effect of De-Ashing Strategies on Pore Structure and Electrochemical Performance of Activated Carbons for Supercapacitors |
3 |
| The Effect of the Wear of Rotor Pins on Grinding Efficiency in a High-speed Disintegrator |
3 |
| A Novel Approach for Accelerated Fabrication of Calcium Hydroxyapatite Thin Films |
2 |
| Comparative Study on the Tribological Properties of AISI52100 Steel Surface Modified by Graphite/MoS2 Composite Coating and Manganese Phosphate Coating |
2 |
| Strength of Different Fiber Reinforced Concrete in Marine Environment |
2 |
| Behaviour of Geopolymer Mortars after Exposure to Elevated Temperatures |
2 |
| Microwave Metathesis Synthesis and Characterization of TMPO4 (TM = Cr, Mn, Fe, Co, Ni, Cu) |
2 |
| Development of Concrete Paving Blocks Prepared from Waste Materials without Portland Cement |
2 |
| Magnesium Doped Hercynite: Preparation and Formation Mechanism |
2 |
| The Mechanical and Comfort Properties of Viscose with Cotton and Regenerated Fibers Blended Woven Fabrics |
2 |
| Interactions Between Fibroblast Cells and Laser Beam Welded AISI 2205 Duplex Stainless Steel |
2 |
| Synthesis, Characterization of Metal-Schiff Base Functionalized Mesoporous Silica for Pesticide Adsorption |
2 |
| First-principles Calculation of the Electronic Structure and Optical Properties of ZnO Co-doped with Nb and Ta |
2 |
| Microstructure and Magnetic Studies of La1-xSrxFeO3 Nano Particles Fabricated by the Citrate Sol-Gel Method |
2 |
| Simulation on the Two-phase Separation of Powder Injection Molding 316L Stainless Steel |
2 |
| Research on Tensile Behaviour of New Structural Material MoNiCa |
2 |
| Enhanced Magnetic Squareness in Manganese-Bismuth Mechanical Alloys Incorporating Magnesium Oxide |
1 |
| Mossbauer Spectroscopy and Magnetic Properties of Bi0.8Ca0.2-xSrxFeO3 Nanoparticles by Sol-gel Method |
1 |
| Grain Growth Model of Ultra-Fine Grain AZ80 Magnesium Alloy Multi-Directionally Forged During the Isothermal Heating Process |
1 |
| Turbulence Imaging Simulation Based on Electrically Tunable Polymer Dispersed Liquid Crystals Cell |
1 |
| Preparation and Electrochemical Testing of Polyaniline (PANI) Nanoparticles with Uniform Morphology and Good Dispersion in a Water-task-specific Ionic Liquid Medium |
1 |
| Electrochemical Comparative Characteristics of La(Fe,Si)(13) Type Materials with Different Content of Co in Acidified Phosphate Environment in Presence of Cl- Ions |
1 |
| Dependence of Electrical and Optical Properties of Sol-gel-derived SnO2 Thin Films on Sb-substitution |
1 |
| Numerical Analysis of Roles of Depletion Layer Width in Semiconductor Gas Sensor Using the Gradient-Distributed Oxygen Vacancy Model |
1 |
| Comparison of Plasma Transferred Arc and Submerged Arc Welded Abrasive Wear Resistant Composite Hardfacings |
1 |
| Effect of Er Addition on the High Temperature Strength of Al-Si-Cu-Ni-Mg-Fe Piston Alloys by T5 and T6 Heat Treatment |
1 |
| Modification of Nife Layered Double Hydroxide and Photocatalytic Activity |
1 |
| Kinetic Mechanism of Desilicated Fly Ash Lime Consumption |
1 |
| Effect of Nanoplatelet Size on the Colloidal Stability of Coupled Nanocomposite of TiO2 and Zirconium Phosphate Nanoplatelets |
1 |
| The gamma-irradiation Effect on the Optical Properties of CdTe Thin Films Deposited by Thermal Evaporation Technique |
1 |
| Effects of Small Amounts of Phosphoric Acid as Additive in the Preparation of Microporous Activated Carbons |
1 |
| Role of the Added Ni in Hydrogen-Storage Reactions of MgH2-Zn(BH4)(2)-Tm (Ni, Ti, or Fe) Alloys |
1 |
| Characterization of Ni3Al Alloy Fabricated by Thermal Explosion/Hot Extrusion Technique |
1 |
| A Novel Porous Sm2Ti2O7 Material Synthesized in Sol-gel Process Using Polyethylene Glycol 4000 as Template |
1 |
| Effect of Carbon Forms on Properties of Ag-C Composites Contact Materials |
1 |
| Investigation of Physico-Mechanical and Moisture Absorption Characteristics of Raw and Alkali Treated New Agave Angustifolia Marginata (AAM) Fiber |
1 |
| Effect of Thermo-Treatment on the Physical and Mechanical, Color, Fungal Durability of Wood of Tectona grandis and Gmelina arborea from Forest Plantations |
1 |
| Poly(L-lactic acid) Modified by Magnesium Phenylmalonate: Thermal Behavior, Processing Fluidity, and Mechanical Properties |
1 |
| Effects of SnO2 Addition on the Synthesis of Magnesium Aluminate Spinel Microplatelets |
1 |
| The Effect of Reverse Strain on Microstructure and Strengthening of Copper Fabricated by Severe Plastic Deformation of Torsion Process |
1 |
| Investigation on Strength and Pore Structure of Supersulfated Cement Paste |
1 |
| Effect of Al2O3 and SiC Nano Reinforcements on Microstructure, Mechanical and Wear Properties of Surface Nanocomposites Fabricated by Friction Stir Processing |
1 |
| Geotechnical Properties and Application of Lime Modified Phosphogypsum Waste |
1 |
| How to Analyse Metal Hydride Decomposition Temperatures Using a Sieverts' Type Hydriding-Dehydriding Apparatus and Hydrogen-Storage Characteristics for an MgH2-Based Alloy |
1 |
