| Frequenzbasierte Analyse zufalliger Ermudungsbelastungen: Modelle, Hypothesen, Praxis |
10 |
| A comparison between temperature dependent and constant Young's modulus values in investigating the effect of the process parameters on thermal behaviour during friction stir welding |
5 |
| The modified temperature term on Johnson Cook model for AZ31 magnesium alloy |
4 |
| Influence of the jet velocity on the weld quality of magnetic pulse welded dissimilar sheet joints of aluminum and steelEinfluss der Jetgeschwindigkeit auf die Schwei ss nahtqualitat magnetimpulsgeschwei ss ter Blechverbindungen aus Aluminium und Stahl |
4 |
| The influences of various mixed dielectric fluids on the performance electrical discharge machining of AISI D2 hardened steel |
4 |
| Thermal and mechanical properties of chemically treated oil palm fiber filled acrylonitrile butadiene styrene composites |
4 |
| Optimization of cryogenic carbon dioxide capture from natural gas |
4 |
| Current challenges and future potential of 3D concrete printing |
4 |
| Development and characterization of nano-crystalline cellulose incorporated poly(lactic acid) composite films |
4 |
| On the microstructure and the origin of intermetallic phase seams in magnetic pulse welding of aluminum and steelGefuge und Ursache von intermetallischen Phasen beim Magnetpulsschwei ss en von Aluminium und Stahl |
4 |
| Modified laser beam welding of aluminum-silicon coated 22MnB5 |
4 |
| Very high cycle fatigue behaviour of compression springs under constant and variable amplitude loading |
3 |
| Effect of the wall thickness on the forming behavior and welding result during magnetic pulse weldingEinfluss der Wandstarke auf das Umformverhalten und das Schwei ss ergebnis beim Magnetpulsschwei ss en |
3 |
| Wear and corrosion studies of graphite-aluminum composite reinforced with micro/nano-TiB2 via spark plasma sintering |
3 |
| Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement, torsion and mechanical properties of aluminium |
3 |
| Investigations of geometrical structure and morphology of samples made of hard machinable materials after wire electrical discharge machining and vibro-abrasive finishing |
3 |
| Mechanical and wear performance evaluation of tungsten added Co-30Cr-4Mo-1Ni biomedical alloy with Taguchi optimization |
3 |
| A study on annealing-induced softening in cold drawn Cu-Cr-Sn alloy |
3 |
| Some useful approximations for wrought aluminum alloys based on monotonic tensile properties and hardness |
3 |
| Mechanical and tribological performance of polyamide 12 reinforced with graphene nanoplatelets and paraffin oil nanocomposites |
3 |
| Lubrication mechanisms of C-MoS2-Fe2O3 (Fe3O4) nano-composite lubricants at the rubbing interfaces of non-copper coated solid wires against the contact tube |
3 |
| Compressive behaviour of additively manufactured AlSi10Mg |
3 |
| Prognosis of gas turbine remaining useful life using particle filter approach |
3 |
| Characterization and stability analysis of oil-based copper oxide nanofluids for medium temperature solar collectors |
3 |
| Effects of test procedures and lithology on estimating the mode I fracture toughness of rocks using empirical relations |
3 |
| Effect of pin offset on the mechanical properties of friction stir welded AA 6013 aluminum alloy plates |
2 |
| Influence of manganese dioxide and Ba2Co2Fe12O22-additives on the magnetic power loss of Ni0.8Zn0.2Fe2O4 ferrites |
2 |
| Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075 |
2 |
| Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys |
2 |
| Design of a pavement using piezoelectric materials |
2 |
| Multi-response optimization of the machining characteristics in electrical discharge machining (EDM) using span-20 surfactant and chromium (Cr) powder mixed |
2 |
| Application of the hybrid process ultrasound enhanced friction stir welding on dissimilar aluminum/dual-phase steel and aluminum/magnesium jointsAnwendung des Hybridprozess des ultraschallgestutzten Ruhrreibschwei ss ens auf artfremde Aluminium/Dualphasenstahl- und Aluminium/Magnesium-Verbunde |
2 |
| Process boundaries of collision welding at low energiesProzessgrenzen des Kollisionsschwei ss ens bei niedrigen Energien |
2 |
| Comparative experimental study on the modification of microstructural and mechanical properties of friction stir welded and gas metal arc welded EN AW-6061 O aluminum alloys by post-weld heat treatment |
2 |
| Enhancement of work-hardening behavior of dual phase steel by heat treatment |
2 |
| A synergy study of zinc borate in halloysite nanotube reinforced, siloxane epoxy base intumescent fire resistive coatings |
2 |
| Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings |
2 |
| Effect of thin SiO2 layers deposited by means of atomic layer deposition method on the mechanical and physical properties of stainless steel |
2 |
| A computationally efficient numerical model for a dynamic analysis of beam type structures based on the combined finite-discrete element method |
2 |
| Development of additively manufactured, topology-optimized interface elements uniting an electrical drivetrain with a conventional chassis |
2 |
| Thermographic analysis of the building height impact on the properties of tool steel in selective laser beam melting |
2 |
| Effect of carnauba wax as a part of feedstock on the mechanical behavior of a part made of 4605 low alloy steel powder using metal injection moldingEinfluss von Carnaubawachs als Teil des Rohmaterials auf das mechanische Verhalten eines Metallpulverspritzguss-Bauteils aus dem niedriglegierten Stahlpulver 4065 |
2 |
| Analysis of dissimilar friction stir welding process for tensile properties of EN AW 2024 and EN AW 5083 |
2 |
| High-performance Cu/Al laminated composites fabricated by horizontal twin-roll casting |
2 |
| Shot peening using spherical micro specimens generated in high-throughput processes |
2 |
| Herstellung und Untersuchung des Verschlei ss verhaltens von induktiv eingeschmolzenen Hardpaint-SchutzschichtenProduction and investigation of the wear behavior of inductively melted hardpaint coatings |
2 |
| Thermodynamic calculation and analysis for aluminum-alloyed high boron high speed steel |
2 |
| Solid solubility extension of copper-tin immiscible system during mechanical alloying |
2 |
| Effect of yttrium addition on the microstructure and corrosion resistance of Mg-Zn-Zr alloysEinfluss der Yttrium Zugabe auf das Gefuge und die Korrosionsbestandigkeit von Mg-Zn-Zr-Legierungen |
2 |
| Labyrinth seals with application to turbomachinery |
2 |
