| Experimental investigations on the performance and noise characteristics of a forward-curved fan with the stepped tongue |
13 |
| Challenges in improving the performance of eddy current testing: Review |
11 |
| Human activity recognition from smart watch sensor data using a hybrid of principal component analysis and random forest algorithm |
8 |
| Robust precision motion control of piezoelectric actuators using fast nonsingular terminal sliding mode with time delay estimation |
7 |
| Adaptive backstepping sliding mode control for wheel slip tracking of vehicle with uncertainty observer |
7 |
| Metaheuristic approach in machinability evaluation of silicon carbide particle/glass fiber-reinforced polymer matrix composites during electrochemical discharge machining process |
6 |
| Actuator fault detection and isolation on a quadrotor unmanned aerial vehicle modeled as a linear parameter-varying system |
6 |
| Time-delay feedback cooperative adaptive cruise control of connected vehicles by heterogeneous channel transmission |
6 |
| Multi-response optimization of dry sliding wear parameters of AA6026 using hybrid gray relational analysis coupled with response surface method |
6 |
| Thermal and structural modelling of arc welding processes: A literature review |
6 |
| Adaptive Model Predictive Control of a Two-wheeled Robot Manipulator with Varying Mass |
6 |
| An equivalent circuit model analysis for the lithium-ion battery pack in pure electric vehicles |
6 |
| Measurement method of screw thread geometric error based on machine vision |
6 |
| Neural network modeling and single-neuron proportional-integral-derivative control for hysteresis in piezoelectric actuators |
5 |
| Particle swarm optimization-based adaptive super-twisting sliding mode control design for 2-degree-of-freedom helicopter |
5 |
| Active-disturbance-rejection-control and fractional-order-proportional-integral-derivative hybrid control for hydroturbine speed governor system |
5 |
| Effect of wind disturbance on the aerodynamic performance of coaxial rotors during hovering |
5 |
| Fuzzy proportional-integral speed control of switched reluctance motor with MATLAB/Simulink and programmable logic controller communication |
4 |
| Robust active fault-tolerant control for internal combustion gas engine for air-fuel ratio control with statistical regression-based observer model |
4 |
| Hybrid fault tolerant control for air-fuel ratio control of internal combustion gasoline engine using Kalman filters with advanced redundancy |
4 |
| Flight Motion Controller Design using Genetic Algorithm for a Quadcopter |
3 |
| Detecting Outliers in Electric Arc Furnace under the Condition of Unlabeled, Imbalanced, Non-stationary and Noisy Data |
3 |
| Low-voltage ride-through capability enhancement of wind energy conversion system using an ant-lion recurrent neural network controller |
3 |
| Modal shape measurement of fiber-reinforced composite plate with high efficiency and precision based on laser linear scanning method |
3 |
| An experimental investigation of the effects of point angle on the high-speed steel drills performance in drilling |
3 |
| Complex anti-synchronization of two indistinguishable chaotic complex nonlinear models |
3 |
| A study on load position control and vibration attenuation in crane operation using sub-actuator |
3 |
| The parameter identification method study of the splice equivalent circuit model for the aerial lithium-ion battery pack |
3 |
| Assessing risks and threats with layered approach to Internet of Things security |
3 |
| Modeling and controlling of quadrotor aerial vehicle equipped with a gripper |
3 |
| Earth pressure balance control of shield tunneling machine based on nonlinear least squares support vector machine model predictive control |
3 |
| Double-layered nonlinear model predictive control based on Hammerstein-Wiener model with disturbance rejection |
3 |
| A regression model for prediction of idler rotational resistance on belt conveyor |
3 |
| Determination of the flight dynamic envelope via stable manifold |
2 |
| Time synchronization requirement of global navigation satellite system augmentation system based on pseudolite |
2 |
| Quantitative evaluation of the impurity content of grease for low-speed heavy-duty bearing using an acoustic emission technique |
2 |
| Assist-as-needed control strategy for upper-limb rehabilitation based on subject's functional ability |
2 |
| A new shock-wave test apparatus for liquid CO2 blasting and measurement analysis |
2 |
| Automatic sorting system for industrial robot with 3D visual perception and natural language interaction |
2 |
| Coupling dynamic modelling and parameter identification of a flexible manipulator system with harmonic drive |
2 |
| Vehicle speed measurement by on-board acoustic signal processing |
2 |
| A model-based approach for estimation of the crack depth on a massive metal structure |
2 |
| An overview of various kinds of wind effects on unmanned aerial vehicle |
2 |
| Training a model-free reinforcement learning controller for a 3-degree-of-freedom helicopter under multiple constraints |
2 |
| Pose detection of parallel robot based on improved RANSAC algorithm |
2 |
| Kinematic arrangement optimization of a quadruped robot with genetic algorithms |
2 |
| Full-scale measurement on vibration performance of vehicle-mounted optical transceiver mast |
2 |
| Analysis and Compensation of Equivalent Diameter Error of Articulated Arm Coordinate Measuring Machine |
2 |
| A modified cross-correlation algorithm to achieve the time difference of arrival in sound source localization |
2 |
| Design and implementation of dspic33fj32mc204 microcontroller-based asynchronous motor voltage/frequency speed control circuit for the ventilation systems of vehicles |
2 |
