| Radial-Shear Rolling of Titanium Alloy VT-8 Bars with Controlled Structure for Small Diameter Ingots (<= 200 mm) |
9 |
| Study of Transient and Steady-State Stages During Two-High and Three-High Screw Rolling of a 12Kh18N10T Steel Workpiece |
7 |
| Prediction of Potential Fracturing During Radial-Shear Rolling of Continuously Cast Copper Billets by Means of Computer Simulation |
6 |
| Effect of Impurities on the Phase Composition and Properties of a New Alloy of the Al-Y-Er-Zr-Sc System |
6 |
| Prediction of the Fracture of Metal in the Process of Screw Rolling in a Two-Roll Mill |
6 |
| Improvements to Mixing of Natural Gas and Hot-Air Blast in the Air Tuyeres of Blast Furnaces with Thermal Insulation of the Blast Duct |
5 |
| Advanced Technology for Preparing Bar from Medical Grade Ti-Zr-Nb Superelastic Alloy Based on Combination of Radial-Shear Rolling and Rotary Forging |
5 |
| Computer Simulation of Thermal and Stress-Strain State of Blast Furnace Tuyeres |
4 |
| Computer Simulation of Piercing in a Four-High Screw Rolling Mill |
3 |
| Methods and Equipment for Breaking Down Gold-Containing Concentrates from Lean Ores and Mining Industry Waste |
3 |
| Effect of Chemical Composition and Microstructure Parameters on Carbon and Low-Alloy Steel Corrosion Resistance Under Oil Industry Pipeline Operation Conditions |
3 |
| EFFECT OF PRODUCTION FACTORS ON MAIN OIL PIPELINE PIPE METAL PROPERTY FORMATION |
3 |
| Oxidation Sulfuric Acid Autoclave Leaching of Copper Smelting Production Fine Dust |
3 |
| Production of Hollow Railroad Axles by Screw Piercing and Radial Forging |
3 |
| Testing of the Technology of Radial-Shear Rolling and Predesigning Selection of Rolling Minimills for the Adaptable Production of Titanium Rods with Small Cross Sections Under the Conditions of the CHMP JSC |
3 |
| DETERMINATION OF OPTIMUM PRODUCTION PARAMETERS FOR DEPLETION OF BALKHASH COPPER-SMELTING PLANT DUMP SLAGS |
3 |
| Production Features of Magnesium-Neodymium Master Alloy Synthesis |
2 |
| Effect of Continuous Extrusion Parameters on Alloy M1 Round Section Bar Microstructure and Mechanical Property Formation |
2 |
| Copper Alloy Marking by Altering its Surface Topology Using Laser Heat Treatment |
2 |
| Principles of Creating New Economically Alloyed Ferritic Steels with a Unique Set of Properties |
2 |
| Study of the Effect of Composition and Thermal Deformation Treatment on Properties of Ferritic Steels Microalloyed with Titanium and Niobium. Part 2. Phase Precipitate Characteristics(*) |
2 |
| MECHANICAL PROPERTIES AND CORROSION BEHAVIOR OF BRIDGE WEATHERING STEELS CONTAINING 3.5% Ni |
2 |
| Obtaining Multi-Component Pellets from Finely Dispersed Chromium Concentrates, Refined Ferrochrome Slags and Diatomite Raw Materials of Kazakhstan |
2 |
| Effect of Heat Treatment on Corrosion Activity of Nonmetallic Inclusions and Steel Corrosion Resistance in Aqueous Media |
2 |
| MODELING OF THE TEMPERATURE FIELD OF AIR TUYERES IN THE BLAST FURNACES WITH THERMAL INSULATION OF THE NOSE PORTION |
2 |
| Study of the Effect of Composition and Thermal Deformation Treatment on Properties of Ferritic Steels Microalloyed with Titanium and Niobium. Part 1. Microstructure Characteristics |
2 |
| Complex Mathematical Model of the Distribution of Multicomponent Charge in a Blast Furnace |
2 |
| Use of Thiourea Leaching During Gold-Containing Dump Treatment |
2 |
| Effect of the Thermal Insulation of the Inner Wall on the Thermal Condition of the Air Tuyeres of Blast Furnaces |
2 |
| Structural and Analytical Evaluation of the Strain Intensity and its Components During Cross-Roll Piercing at Different Feed Angles |
2 |
| Correlating Hardness and Welding Dilution with the Abrasion Mass Loss of Hardfacings Welded with Different Currents and Polarities |
2 |
| Flow Characterization and Inclusions Removal in a Slab Tundish Equipped with Bottom Argon Gas Feeding |
2 |
| Analysis of Drive Mechanisms for the Working Stand in Periodic Cold-Rolled Pipe Mills |
1 |
| Elevation of the Wear Resistance of Threads of Tubing Strings Under the Action of Ultrasound |
1 |
| Theoretical Foundations of the Design of a Lever Mechanism of Oscillations of the Mold of a Sorting Machine for the Continuous Casting of Billets |
1 |
| Wear and Breakage Resistance of Hard Alloy Coatings Strengthened with Tungsten Carbide |
1 |
| Efficient Management of the Charging of Blast Furnaces and the Application of Contemporary Means of Control Over the Variable Technological Conditions |
1 |
| Technology for Extracting Manganese from Vanadium Converter Slag After Leaching Vanadium |
1 |
| Heat Exchange in the Granulation Chamber of an Installation for Slag Dry Granulation |
1 |
| Plasma Heating of Periclase-Carbonaceous Refractory for Lining of Steel Ladles |
1 |
| Damping Steels for Sheet Stacker Components During Sheet Rolling |
1 |
| Improvement of Heat-Treatment Conditions for Square-Cross-Section Steel Billets Downstream of a Continuous-Section Billet Casting Machine |
1 |
| Control of metal heat treatment process in a furnace using a diagnostic system based on batch heat capacity |
1 |
| Introduction of Energy Efficient Solutions During Cast Iron Smelting at PJSC NLMK |
1 |
| Improvement of a Set of Steel Properties Due to Forming Phase Precipitates During Hot Deformation Combined with Quenching |
1 |
| Blast Distribution Over the Air Tuyeres of a Blast Furnace |
1 |
| Use of Electrolytic Zinc Powder for Cementation of Gold from Cyanide Solutions |
1 |
| Development of a Production Scheme for Utilizing Vanadium Pentoxide Hydrometallurgical Production Waste |
1 |
| Microstructure and Mechanical Properties of Objects Prepared by Selective Laser Melting of AKD12 Powder |
1 |
| Effect of Ferrite Content on High-Temperature Strength of 12% Chromium Steels with a Ferritic-Martensitic Structure |
1 |
