| Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying |
30 |
| Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles |
18 |
| Degradation and physical properties of sugar palm starch/sugar palm nanofibrillated cellulose bionanocomposite |
18 |
| Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment |
16 |
| Fire resistant glass fabric-epoxy composites with reduced smoke emission |
7 |
| Effect of wood flour addition and modification of its surface on the properties of rotationally molded polypropylene composites |
7 |
| Biodegradable agroplastics in 21st century horticulture |
7 |
| Influence of fiber length, fiber content and alkali treatment on mechanical properties of natural fiber-reinforced epoxy composites |
6 |
| Mechanical properties and biodegradability of flax fiber-reinforced composite of polylactide and polycaprolactone |
5 |
| MuCell (R) and InduMold technologies in production of high quality automotive parts from polymer materials |
5 |
| Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler |
5 |
| Comparison of off-line, on-line and in-line measuring techniques used for determining the rheological characteristics of polyethylene composites with calcium carbonate |
4 |
| Application of in-line rheological measurements for characterization of polypropylene/opoka rock powder composites |
4 |
| Industry 4.0 Part I. Selected applications in processing of polymer materials |
4 |
| Thermoresponsive polymer surfaces and their application in tissue engineering |
4 |
| Destruction assessment of wind power plastics blade |
4 |
| Effect of modified bentonites on the crosslinking process of epoxy resin with alifphatic amine as curing agent |
4 |
| Process optimization for single screw extrusion of polymeric materials - simulation studies |
3 |
| Calcium lignosulfonate as eco-friendly additive for crosslinking fibrous composites with phenol-formaldehyde resin matrix |
3 |
| Automating the process of designing and manufacturing polymeric models of anatomical structures of mandible with Industry 4.0 convention |
3 |
| Novel hybrid composites based on polypropylene with basalt/carbon fiber (Rapid communication) |
3 |
| Application of coordination measuring methods for assessing the performance properties of polymer gears |
3 |
| Optimization for single screw extrusion of polymeric materials - experimental studies |
3 |
| Analysis of swelling degree and gel fraction of polylactide/poly(butylene adipate-co-terephthalate) blends crosslinked by radiation |
3 |
| Semi-rigid polyurethane foams with rapeseed polyol of different viscosity |
3 |
| Synthesis and characterization of high-molar-mass star-shaped poly(L-lactide)s |
3 |
| Industrial composting as a waste management method of polyester materials obtained from renewable sources |
3 |
| New bio-polyol based on white mustard seed (Sinapis alba) as an alternative raw material for the polyurethane industry |
3 |
| The influence of blowing agents type on foaming process and properties of rigid polyurethane foams |
3 |
| Rheological and textural properties of hydrogels, containing sulfur as a model drug, made using different polymers types |
3 |
| Study on physical aging of amorphous polylactide by differential scanning calorimetry |
2 |
| New aromatic diamine-based deep eutectic solvents designed for epoxy resin curing (Rapid Communication) |
2 |
| Visualization and flow velocity determination of molten polymers |
2 |
| Mechanical strength evaluation of poly(methyl methacrylate) reinforced with long glass, carbon and aramid fibers |
2 |
| Methodology for determining selected characteristics of polyethylene dyeing using CIELab system |
2 |
| Industry 4.0 Part II. Conditions in the area of production technology and architecture of IT system in processing of polymer materials |
2 |
| Azopolyimides - influence of chemical structure on azochromophore photo-orientation efficiency |
2 |
| Mechanical properties of kenaf fiber thermoplastic polyurethane-natural rubber composites |
2 |
| Torsional strength testing of machine elements manufacture by incremental technology from polymeric materials |
2 |
| Glass transition temperature-cure temperature-transformation (TgTT) diagram for EPY (R) epoxy system |
2 |
| Possibilities of using plasma techniques of surface engineering for modification of polymer membranes |
2 |
| Effect of crosslinking agent on potato starch grafted acrylamide copolymers and their sorption properties for water, Fe3+ and Cu2+ cations |
2 |
| Mechanical and thermal behavior of hybrid glass/jute fiber reinforced composites with epoxy/polyester resin |
2 |
| The impact of addition of xanthan gum and guar gum on rheological properties of foams produced by continuous method |
2 |
| Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials |
2 |
| Effect of surface wettability of wood-polymer composites on biofilm formation in wastewater treatment processes |
2 |
| Evaluation of functional properties and fibroblast growth on squashy cellular scaffolds |
2 |
| Reinforcement of epoxy resin/carbon fiber composites by carboxylated carbon nanotubes: a dynamic mechanical study |
2 |
| The effect of ground coffee on the mechanical and application properties of rigid polyurethane-polyisocyanurate foams (Rapid communication) |
2 |
| Composites of phenol-formaldehyde resins filled with modified bentonites and reinforced with fiberglass mesh for application as grinding wheels |
2 |
