| Dry and steam reforming of methane. Comparison and analysis of recently investigated catalytic materials. A short review |
9 |
| Metals uptake behaviour in Miscanthus x giganteus plant during growth at the contaminated soil from the military site in Sliac, Slovakia |
6 |
| Characterization and optimization of spectrophotometric colour removal from dye containing wastewater by Coagulation-Flocculation |
5 |
| Hydrophilic films based on starch and carboxymethyl starch |
5 |
| A novel DOPO-g-KH550 modification wood fibers and its effects on the properties of composite phenolic foams |
5 |
| Synthesis of a novel environmental friendly plasticizer based on tung oil fatty acid for poly (vinyl chloride) blends |
4 |
| Batch electrodialysis of lactic acid obtained from LAB fermentation |
4 |
| Numerical investigation of the turbulent flow generated with a radial Turbine using a converging hollow blade |
4 |
| Biosorption of Cu2+ and Ni2+ ions from aqueous solutions using waste dried activated sludge biomass |
3 |
| The Effects of Epoxidized Acrylated Castor Oil (EACO) on Soft Poly (vinyl chloride) Films as a Main Plasticizer |
3 |
| Non-alcoholic beer production - an overview |
3 |
| Design and simulation of high purity biodiesel reactive distillation process |
3 |
| Biodegradable polylactide and thermoplastic starch blends as drug release device - mass transfer study |
3 |
| Composite coatings with nickel matrix and graphene as dispersed phase |
3 |
| Preparation and properties of nanocrystalline Ni/graphene composite coatings deposited by electrochemical method |
3 |
| Ultrasound-assisted emulsification microextraction and spectrophotometric determination of cobalt, nickel and copper after optimization based on Box-Behnken design and chemometrics methods |
3 |
| New bio-polyol based on white mustard seed oil for rigid PUR-PIR foams |
3 |
| Adsorption mechanism and modelling of hydrocarbon contaminants onto rice straw activated carbons |
2 |
| The catalytic oxidation of toluene at low temperature over palladium nanoparticles supported on Alumina sphere catalysts: effects of Palladium precursors and preparation method |
2 |
| Modification of substandard EPDM with amorphous thermoplastic polyesters (PETG and PEF): microstructure and physical properties |
2 |
| Extraction of rubidium and cesium from brine solutions using a room temperature ionic liquid system containing 18-crown-6 |
2 |
| Use of carbon and aluminosilicate nanofillers in XNBR composites designed for protective materials against oils |
2 |
| Degradation of sertraline in water by suspended and supported TiO2 |
2 |
| Titania/mesoporous silica nanotubes with efficient photocatalytic properties |
2 |
| Study of selected physical, chemical and biological properties of selected materials intended for contact with human body |
2 |
| Enzymatic bioconversion of feather waste with keratinases of Bacillus cereus PCM 2849 |
2 |
| Ethylcellulose as a coating material in controlled-release fertilizers |
2 |
| Adsorption of congo red from aqueous solutions by porous soybean curd xerogels |
2 |
| Encapsulated catalase from Serratia genus for H2O2 decomposition in food applications |
2 |
| Controlled-release urea encapsulated by ethyl cellulose/butyl acrylate/vinyl acetate hybrid latex |
2 |
| Permeability of P and K-nutrient through polystyrene membrane from aqueous solutions of urea + KH2PO4 |
2 |
| Oxidation of cyclic ketones to dicarboxylic acids |
1 |
| Comparison of photoacoustic, diffuse reflectance, attenuated total reflectance and transmission infrared spectroscopy for the study of biochars |
1 |
| Purification and recovery of laccase produced by submerged cultures of Trametes versicolor by three-phase partitioning as a simple and highly efficient technique |
1 |
| Environmental friendly method of the epoxidation of limonene with hydrogen peroxide over the Ti-SBA-15 catalyst |
1 |
| Parametric optimization of coal desulfurization through Alkaline leaching |
1 |
| Water demineralization by membrane distillation utilizing cooling water from municipal waste incinerator |
1 |
| Technological parameters of epoxidation of sesame oil with performic acid |
1 |
| Optimization and evaluation of alkali-pretreated Paeonia ostii seed coats as adsorbent for the removal of MB from aqueous solution |
1 |
| H-2 and syngas production from catalytic cracking of pig manure and compost pyrolysis vapor over Ni-based catalysts |
1 |
| Comparative studies on the adsorption of Pb(II) ions by fly ash and slag obtained from CFBC technology |
1 |
| Equilibrium, kinetic and thermodynamic studies on methylene blue adsorption by Trichosanthes kirilowii Maxim shell activated carbon |
1 |
| Synthesis of an optical catalyst for cracking contaminating dyes in the wastewater of factories using indium oxide in nanometer and usage in agriculture |
1 |
| Silver nanoparticles deposited on calcium hydrogenphosphate - silver phosphate matrix; biological activity of the composite |
1 |
| Removal of Hexavalent Chromium from Aqueous Solution by the Pod of Acacia gerrardii |
1 |
| Synthesis, characterization of Hollandite Ag2Mn8O16 on TiO2 nanotubes and their photocatalytic properties for Rhodamine B degradation |
1 |
| Comparison of the composition and fungicidal activity of essential oils from fennel fruits cultivated in Poland and Egypt |
1 |
| Strontium-based nanosized phosphates as anticorrosive fillers of epoxy and polyurethane coating compositions |
1 |
| Experimental analysis of gas hold-up for gas-liquid system agitated in a vessel equipped with two impellers and vertical tubular baffles |
1 |
| Energy efficiency analysis of styrene production by adiabatic ethylbenzene dehydrogenation using exergy analysis and heat integration |
1 |
