| Single-Step Solution Polymerization and Thermal Properties of Copolyesters Based on High Trans-4-Cyclohexanedimethanol, Terephthaloyl Dichloride, and 6-Naphthalene Dicarboxylic Chloride |
5 |
| Physical Properties of Flexible Polyurethane Foams Manufactured by Varying Toluene Diisocyanate Contents |
4 |
| Physical Properties of Poly(lactic acid)/Cellulose Nanocrystal Nanocomposites |
4 |
| Synthesis and Properties of Copolyesters Derived from 4-Cyclohexanedimethanol, Terephthalic Acid, and 6-Naphthalenedicarboxylic Acid with Enhanced Thermal and Barrier Properties |
4 |
| Relationship between Deposition Strength and Cross-section Morphology of a Material Extrusion-type 3D Printing Manufactured Article |
3 |
| Morphology, Thermal and Crystallization Properties of Polyamide-6/Boron Nitride (BN) Thermal Conductive Composites |
3 |
| Study on the Pressure-Volume-Temperature Properties of Polypropylene at Various Cooling and Shear Rates |
3 |
| Characterization of EDTA Functionalized Graphene Oxide/Polyethersulfone (FGO/PES) Nanocomposite Membrane and Using for Elimination of Heavy Metal and Dye Contaminations |
3 |
| A Study on the Improvement of Rheological Characteristics of HTPB/AP Propellant |
3 |
| Preparation and Properties of Eco-friendly Polyurethane Composites Using Microcrystalline Cellulose with Secondary Amino Group as Fillers |
3 |
| Preparation and Properties of Thiol-ene UV-cured Nanocomposites with Methacrylate-grafted Cellulose Nanocrystals as Fillers |
3 |
| Improvement of Physical Properties of Polypropylene Chemical Foam by Glass Fiber Reinforcement |
3 |
| The Tactile Assessment of Skin Materials in Automotive Interior |
2 |
| Effect of Surface Modification of Hollow Glass Microspheres (HGM) in Rubber Composites |
2 |
| Novel Preparation Route of Conductive PPy-PAN Hybrid Thin Films Using Simultaneous Co-vaporized Vapor Phase Polymerization |
2 |
| Synthesis of Modified Chelate Resins Containing N-methyl-D-glucamine and Improvement of Boron Removing Characteristics |
2 |
| Characteristics of Piezoelectric Polymeric PVDF Sensor by Impact Testing |
2 |
| Photo-degradation Behaviors of Ultra-violet Light Irradiated Poly(ethylene terephthalate) Films for Back-sheet in Solar Cells |
2 |
| Properties of Epoxidized Soybean Oil Modified Epoxy Resins: Chemorheology and Cure Kinetics |
2 |
| Properties of Epoxidized Soybean Oil Modified Epoxy Resins 2: Thermal, Mechanical, and Morphological Properties |
2 |
| Epoxy Networks Cured with alpha,omega-Diamino Polyoxytetramethylene in the Presence of Polyoxytetramethylene-coated Silica Nanoparticles |
2 |
| Investigation of Dielectric Properties of Polyethylene-Clay Nanocomposites for Quantifying Nanofiller Dispersion |
2 |
| The Study of Multi-walled Carbon Nanotube Surface and Matrix Structure for Thermal Conductive Composite Material |
2 |
| Rheological and Processing Properties of Poly(lactic acid) Composites Filled with Ground Chestnut Shell |
2 |
| Physical Properties of a DGEBA Epoxy Resin System Modified with Epoxidized Soybean Oil |
2 |
| Effect of Copolymer Polyol Content and NCO Index on the Comfort of Polyurethane Seat Foam Pad for Automobiles |
2 |
| A Study on the Synthesis of Transparent Polyimide Film with Siloxane Group |
2 |
| Investigation on Anisotropy according to Printing Conditions for Projection Type Photo-polymerization 3D Printing |
2 |
| Effect of Carbon Fiber Orientation on the Physical Properties and Crystallization Behavior of Nylon 66/Carbon Filler Composites |
1 |
| Effect of Acrylate Oligomer on the Migration of PVC Phthalate Plasticizer |
1 |
| Phenothiazine Derivative as Organic Photocatalyst for Metal Free Atom Transfer Radical Polymerization |
1 |
| Synthesis and Curing of AUT-PNIMMO with Three Functional Groups |
1 |
| Surface Functionalization of Graphene Oxide via Activators Regenerated by Electron Transfer for Atom Transfer Radical Polymerization and Its Effect on the Performance of Poly(lactic acid) |
1 |
| Experimental Investigation of Drilling Characteristics of Jute Fiber Reinforced Graphene Filled Epoxy Nanocomposites |
1 |
| Improvement in Polar Characteristics of Polyethylene Wax by Grafting with Styrene-Maleic Anhydride |
1 |
| Preparation of Cellulose Nanocrystals from Microcrystalline Cellulose and Introduction of Methacrylate Groups onto the Surface of Cellulose Nanocrystals |
1 |
| Polymerization and Wet-spinning of Flame Retardant Poly(acrylonitrile-co-vinylidene chloride) Copolymers: Effect of Vinylidene Chloride Content |
1 |
| Melt Flow Improvement of Polyamide 6/Glass Fiber Composite Using Amide-type Lubricant |
1 |
| Effects of Adsorption Voltages and Thickness of Coated Ion Exchange Membrane Layer on Adsorption Performance in Membrane Capacitive Deionization Process |
1 |
| A Novel Method for Manufacturing Electromagnetic Interference Shielding Composites by Using Blend Slivers of Electro-conductive Acrylic Fiber and Polypropylene Fiber |
1 |
| Evaluation of Freeze-Dry Chitosan-Gelatin Scaffolds with Olibanum Microspheres Containing Dexamethasone for Bone Tissue Engineering |
1 |
| Effect of Silane Treatment on Mechanical Properties of Polymer-infiltrated Ceramic Dental Materials |
1 |
| Numerical Simulation on the Enhanced Mixing of Polymer Melt by Single Screw with Torsion Elements in the Homogenizing Section |
1 |
| Study on the Odor Reduction of Polypropylene (PP)/Bamboo Fiber (BF) Composite |
1 |
| Enhancement of Dimensional Stability of Poly(vinyl alcohol) Films by Cellulose Nano Fibers |
1 |
| Poly(DMAEMA-co-MPS) Coated Mesoporous Silica Nanoparticles as Smart Drug Carriers with pH-controlled on-off Release |
1 |
| Synthesis of PIBSI Derivatives Using Highly Reactive Polybutene and Their Friction Reducing Effects |
1 |
| Electrical and Mechanical Properties of PA66/PPE Blend Containing MWCNT |
1 |
| Effect of Crystallinity and Thermal Stability of Nanostructured Cellulose/Halloysite Nanotube Composites |
1 |
| Evaluation of Gellan Gum/Glycol Chitosan Bioabsorbable Membrane for Guided Bone Regeneration |
1 |
