| The Gd2Zr2O7-Based Materials for Thermal Barrier Coatings |
4 |
| Combination of Mechanical and Electromagnetic Stirring to Distribute Nano-Sized Al2O3 Particles in Magnesium Matrix Composite |
4 |
| Thermal Barrier Coatings: Current Status, Search, and Analysis |
4 |
| EVALUATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MULTILAYER Al5052-Cu COMPOSITE PRODUCED BY ACCMULATIVE ROLL BONDING |
4 |
| Influence of Temperature of Accumulative Roll Bonding on the Mechanical Properties of AA5083-1% Al2O3 Composite |
4 |
| Quality Analysis of Aluminized Surface Layers Produced by Electrospark Deposition |
4 |
| The Effect of TiB2 Content on Wear and Mechanical Behavior of AZ91 Magnesium Matrix Composites Produced by Powder Metallurgy |
4 |
| Study of Processing and Microstructure of Copper Composite Reinforced with Graphene Nanosheet by Powder Metallurgy Technique |
3 |
| Pressureless Spark Plasma Sintering: A Perspective from Conventional Sintering to Accelerated Sintering Without Pressure |
3 |
| Effect of FeNiCrBSiC-MeB2 Material Composition on the Oxidation Behavior at High Temperatures |
3 |
| Mechanism of High-Temperature Oxidation of ZrB2-Based Composite Ceramics in the ZrB2-SiC-AlN System |
3 |
| Mechanical Synthesis of Tantalum Borides and Modeling of Solid Solutions of Boron in Tantalum |
2 |
| Thermal Oxidation Kinetics of Multi-Walled Carbon Nanotubes in an Oxygen Flow |
2 |
| PRODUCTION AND PROPERTIES OF B4C-TiB2 COMPOSITES WITH ISOTROPIC EUTECTIC MICROSTRUCTURE |
2 |
| THE EFFICIENCY OF TWIST EXTRUSION FOR COMPACTION OF POWDER MATERIALS |
2 |
| Effect of Chromium Diboride Additives on Strength Properties of NiAl-CrB2 Composites in a Wide Temperature Range |
2 |
| Post-Processing of NiTi Alloys: Issues and Challenges |
2 |
| Hardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC |
2 |
| Microstructural and Mechanical Characteristics of Porous Irons Produced with Small Particle Size Corn Starch |
1 |
| The Effect of Morphology and Particle-Size Distribution of VT20 Titanium Alloy Powders on the Mechanical Properties of Deposited Coatings |
1 |
| Investigation of Microstructural Evolution in Ball-Milling of SiC Reinforced Aluminum Matrix Composites |
1 |
| Simulation of residual thermal stresses in high-porous fibrous silicon nitride ceramics |
1 |
| Effect of SiC Particles on Structure Property and Wear Resistance of AA6061/SiC Surface Composite Fabricated Via Friction Stir Processing |
1 |
| Application of Domestic Heat-Resistant Powders in Additive Techniques |
1 |
| The Influences of Reciprocating Extrusion Passes on the Microstructure Properties of Al 6061/SiC Composites |
1 |
| Features of Physical and Chemical Adsorption During Interaction of Polycrystalline and Nanocrystalline Materials with Gases |
1 |
| Features of Chromium Carbide Synthesis Using Different Forms of Carbon |
1 |
| Development of Mg-Alloy by Powder Metallurgy Method and Its Characterization |
1 |
| Physicochemical Properties of Hydrothermal Nanocrystalline ZrO2-Y2O3-CeO2 Powders |
1 |
| Production of Un-Doped and Er-Doped Y2O3 Thin Films by Electron Beam Evaporation Method |
1 |
| Thermodynamic Properties of Hexagonal Molybdenum Disulfide Calculated from First Principles |
1 |
| STRUCTURIZATION OF COATINGS IN THE PLASMA ARC SPRAYING PROCESS USING B4C + (Cr, Fe)(7)C-3-CORED WIRES |
1 |
| Galvanomagnetic Properties of Thin-Film (Fe, Co, Ni)/Rare Earth Metal Oxide Structures |
1 |
| Mixing Enthalpies of Liquid Cu-Hf-Ti Alloys Studied by High-Temperature Calorimetry |
1 |
| Microstructure and Phase Transformation in Ni50Mn40Sn10 Shape Memory Alloy |
1 |
| STRUCTURAL AND PHASE TRANSFORMATIONS IN PLASMA-SPRAY ZrB2-SiC-AlN COATINGS ON A C/C-SiC SUBSTRATE AFTER HIGH-TEMPERATURE THERMAL CYCLIC HEATING |
1 |
| INVESTIGATION OF CARBON SOURCE AND ATMOSPHERE DURING REDUCTION-CARBONIZATION PROCESS OF SYNTHESIZING WC-Co COMPOSITE POWDERS VIA SPRAY CONVERSION METHOD |
1 |
| MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF A LOW-ALLOY STEEL DUE TO VARIATIONS OF TEMPERATURES |
1 |
| FEATURES OF HIGH-TEMPERATURE OXIDATION OF HIGH-ENTROPY AlCrFe3CoNiCu ALLOY |
1 |
| EFFECT OF MOLYBDENUM ADDITIONS ON THE STRUCTURE OF TiB2-(Fe-Mo) COMPOSITE MATERIALS |
1 |
| THE INFLUENCE OF THE COMPOSITION AND PARTICLE SIZE OF STARTING TITANIUM HYDRIDE POWDERS ON THE CONSOLIDATION OF TITANIUM UNDER SINTERING |
1 |
| PHASE EQUILIBRIA IN THE La2O3-Er2O3 SYSTEM IN THE TEMPERATURE RANGE 1100-1500 degrees C |
1 |
| The Structure and Properties of High-Carbon Ferrochromium Powder Produced from FKh800 Ferroalloy |
1 |
| The Effect of Sintering on the Microstructure, Hardness, and Tribological Behavior of Aluminum-Graphene Nanoplatelet Powder Composites |
1 |
| The Properties of Cr-Co-Cu-Fe-Ni Alloy Films Deposited by Magnetron Sputtering |
1 |
| Properties of Electro-Spark Deposited Coatings Modified Via Laser Beam |
1 |
| The Effect of Magnesium Additives on Aluminum-Based Composites Structure |
1 |
| Modern Manufacturing of Powder-Metallurgical Products with High Density and Performance by Press-Sinter Technology |
1 |
| Densification Dynamics of Fine-Grained WC+25 wt.% Co Cermet During Low-Temperature Impact Sintering in Vacuum |
1 |
| Kinetics of Nonisothermal Pressure Sintering of Zirconium Diboride Powder with Additives of Boron and Chromium Carbides in Vacuum |
0 |
