| A review of 3D concrete printing systems and materials properties: current status and future research prospects |
27 |
| A review on quality control in additive manufacturing |
23 |
| Effect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316L stainless steel |
17 |
| Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography |
17 |
| Optimization of SLM process parameters for Ti6Al4V medical implants |
16 |
| The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties |
16 |
| Adhesion of 3D printed material on textile substrates |
16 |
| Optimising the FDM additive manufacturing process to achieve maximum tensile strength: a state-of-the-art review |
14 |
| Selective laser melting of maraging steel: mechanical properties development and its application in mold |
12 |
| Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modelling |
12 |
| Quality control issues in 3D-printing manufacturing: a review |
11 |
| A study on extruded filament bonding in fused filament fabrication |
11 |
| The effect of hatch angle rotation on parts manufactured using selective laser melting |
11 |
| A framework for big data driven process analysis and optimization for additive manufacturing |
10 |
| Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion |
10 |
| Convolutional neural network-based inspection of metal additive manufacturing parts |
10 |
| Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow |
10 |
| Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications |
10 |
| Effect of process parameters on tensile strength of FDM printed PLA part |
9 |
| Layerwise monitoring of electron beam melting via backscatter electron detection |
9 |
| A processing diagram for high-density Ti-6Al-4V by selective laser melting |
9 |
| Fully resolved numerical simulations of fused deposition modeling. Part II - solidification, residual stresses and modeling of the nozzle |
9 |
| Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations |
9 |
| Fractional relaxation model of materials obtained with selective laser sintering technology |
9 |
| Investigation of ABS-rice straw composite feedstock filament for FDM |
9 |
| Application of fuzzy AHP - TOPSIS for ranking additive manufacturing processes for microfabrication |
8 |
| Design for additive manufacturing - a review of available design methods and software |
8 |
| A review on additive manufacturing of sand molds by binder jetting and selective laser sintering |
7 |
| Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion |
7 |
| Thermal and surface characterization of ABS replicas made by FDM for rapid tooling applications |
7 |
| 3D printing: a critical review of current development and future prospects |
7 |
| Fused deposition modeling five-axis additive manufacturing: machine design, fundamental printing methods and critical process characteristics |
7 |
| Fabrication and stress analysis of ankle foot orthosis with additive manufacturing |
7 |
| The fabrication of NiTi shape memory alloy by selective laser melting: a review |
7 |
| Effect of post-processing on the dimensional accuracy of small plastic additive manufactured parts |
7 |
| SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr |
6 |
| Geometric modeling of lattice structures for additive manufacturing |
6 |
| Review on processes and color quality evaluation of color 3D printing |
6 |
| Microstructure and properties of functionally graded materials Ti6Al4V/TiC fabricated by direct laser deposition |
6 |
| A review of slicing methods for directed energy deposition based additive manufacturing |
6 |
| Additive manufacturing of shape memory polymers: effects of print orientation and infill percentage on mechanical properties |
6 |
| Perception of 3D-printing: analysis of manufacturing use and adoption |
6 |
| Additive manufacturing in the spare parts supply chain: hub configuration and technology maturity |
6 |
| Customized cranial implant manufactured by incremental sheet forming using a biocompatible polymer |
6 |
| Hydraulic manifold design via additive manufacturing optimized with CFD and fluid-structure interaction simulations |
5 |
| Investigation of influence of heat treatment on mechanical strength of FDM printed 3D objects |
5 |
| Mechanobiological assessment of Ti-6Al-4V fabricated via selective laser melting technique: a review |
5 |
| Digital manufacturing applicability of a laser sintered component for automotive industry: a case study |
5 |
| Mechanical properties and water absorption behaviour of PLA and PLA/wood composites prepared by 3D printing and injection moulding |
5 |
| Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens |
5 |
