| Evaluation of the Crack Resistance of Reactive Sintered Composite Boron Carbide-Based Materials |
5 |
| Kaolin Raw Material Briquetting for Lump Chamotte Production |
5 |
| Microstructure and Mechanical Properties of SiC-Materials Sintered in the Liquid Phase with the Addition of a Finely Dispersed Agent |
4 |
| High Density Boron Carbide Ceramics |
4 |
| Titanium-Alumina Slag - Semifunctional Technogenic Resource of High-Alumina Composition. Part 2. Use of Ferrotitanium Slag for Producing Refractories in Metallurgy and Other Branches of Industry |
3 |
| Aluminum Oxide and Alumina Ceramics (review). Part 1. Properties of Al2O3 and Commercial Production of Dispersed Al2O3 |
3 |
| Synthesis and Properties of Mullite-Sialon-ZrB(2)Materials Produced Using a Spark-Plasma Technique |
3 |
| PHASE COMPOSITION AND MICROSTRUCTURE OF REACTION-BONDED BORON-CARBIDE MATERIALS |
3 |
| Preparation of Porous Ceramic Based on Al2O3 as a Result of Zonal Compaction During Sintering of Powder Workpieces of Very Fine Aluminum Powder PAP-2 Combustion Products |
2 |
| Microstructure and Properties of AA6082/(SiC + Graphite) Hybrid Composites |
2 |
| Structure, Properties, and Applications of Graphite-Like Hexagonal Boron Nitride |
2 |
| Mullite-TiC-c-BN-c-ZrO2 materials Produced by Spark-Plasma Sintering and Their Properties |
2 |
| FORMATION OF WEAR- AND CORROSION-RESISTANT COATINGS BY THE MICROARC OXIDATION OF ALUMINUM |
2 |
| Introduction to Ceramic Micromechanics. Ceramic Object Operating System |
2 |
| Solid Solutions Ca12Al14O33 +/-delta: V5+, Mo5+ |
2 |
| Preparation of MoSi2-SiC-ZrB2 Structural Ceramics by Free Sintering |
2 |
| Aluminum Oxide and Alumina Ceramics (Review). Part 2. Foreign Manufacturers of Alumina Ceramics. Technologies and Research in the Field of Alumina Ceramics(1) |
2 |
| Oxide and Alumina Ceramics (Review). Part 3. Russian Manufacturers of Alumina Ceramics(1) |
2 |
| Technological Provision of the Quality of Ring Edges of Silicon-Carbide Friction Couples for the End Seals of the Pumps |
2 |
| Modeling of the Phase Composition of Refractory and Slag Systems, Optimization of Slag Adjustment, and Stabilization of Secondary Steelmaking Slags |
2 |
| Silicon Carbide Liquid-Phase Sintering with Various Activating Agents |
2 |
| Development of a Membrane for Hydrocarbon Dehydrogenation Using High-Temperature Synthesis |
1 |
| Preparation of Inorganic Binder for Cold-Hardening Mixtures |
1 |
| Refractory Compositions Designed for Highly Heat-Resistant Ceramic Molds in Foundry Practice |
1 |
| Synthesis and Thermal Properties of Nano- and Macro-Crystalline Ceramic Materials Based on Bi5FeTi3O15 |
1 |
| Structure and Phase Evolution in a SiC Ceramic Surface Layer During Electron-Beam Treatment |
1 |
| Improvement of the Process of Metal Casting and the Design of Refractory Equipment of the Tundish Ladle - Open Jet - Mold System of a Continuous Billet-Casting Machine |
1 |
| FEATURES OF THE PREPARATION AND STUDY OF ELECTROPHYSICAL CHARACTERISTICS (BeO + TiO2)-CERAMICS BY IMPEDANCE SPECTROSCOPY |
1 |
| Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation |
1 |
| SINTERING A MIXTURE OF POWDERS IN THE Al2O3-SiO2-beta-SiAlON-TiC-Dy2O3 SYSTEM BY THE SPARK-PLASMA METHOD WITH HIGH COMPACTION LOADING |
1 |
| Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 14. Composition and Some Properties of Composite Composition Ceramic Concretes in the System Al2O3-SiO2-SiC-C-1 |
1 |
| Feasibility Assessment for Leucosapphire Production from Aluminum Oxide Prepared Electrochemically |
1 |
| Investigation of the Formation of a Fine-Crystalline Alumina Coating on the Surface of a Blank Aluminum Powder Coating Test Panel as a Result of its Filtration Combustion |
1 |
| FREE SHS-COMPRESSION METHOD FOR PRODUCING LARGE-SIZED PLATES FROM CERAMIC MATERIALS |
1 |
| Dense Mulliteceramic Sintered by SPS and Its Behavior Under Thermal Shock |
1 |
| Resolution of the Problem of Expanded Clay Rubble Dust Formation |
1 |
| A Method for the Evaluation of the Required Flow Rate of Aspirated Air for the Reloading of Loose Materials in Telescopic Plants |
1 |
| Possibility of Preparing Aluminosilicate Fillers Based on Kaolin and Technogenic Materials |
1 |
| High-Temperature Firing of Composite Based on the Max-Phase of the Ti-Al-C System |
1 |
| Production Process Planning for Preparing Si3N4-Ceramic Objects Taking Account of Edge Defectiveness |
1 |
| Highly Porous Permeable Cellular Ceramic Based on Silicon Carbide with Added Mullite |
1 |
| Structure and Physicomechanical Properties of Porous Ceramic Based on Al2O3 Prepared Using a Filtration Combustion Method |
1 |
| Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 11. Composite Composition HCBS (Bauxite Electrocorundum, Quartz Glass) and some Properties of Materials Based Upon Them(1) |
1 |
| Half-Century Epoch of Domestic Quartz Ceramic Development. Part 3(1) |
1 |
| Creation of High-Efficiency Promising Refractory Materials and Constructions for the Lining of Metallurgical Units |
1 |
| Investigation of the Physicochemical Properties of Slag Splashed on the Lining of an Oxygen Converter(1) |
1 |
| Structure Formation in Ti/Ti-Al-C Layered Ceramic Materials Obtained by the Method of Unconfined SHS Compaction |
1 |
| Environmental Technology for the Integrated Disposal of Man-Made Wastes of the Metallurgical Industry: Self-Curing, Chemically Resistant Refractory Mass(1) |
1 |
| DIRECTLY-BONDED PERICLASE-CHROMITE REFRACTORY CORROSION MECHANISM IN AN RH-DEGASSER SUCTION PIPE |
1 |
| SLAG - REFRACTORY INTERACTIONS DURING ILMENITE SMELTING: THERMODYNAMIC SIMULATION AND EXPERIMENTAL DATA |
1 |
