| Nondestructive Characterization of Microstructure and Mechanical Properties of Heat Treated H13 Tool Steel Using Magnetic Hysteresis Loop Methodology |
5 |
| De-noising of Magnetic Flux Leakage Signals Based on Wavelet Filtering Method |
3 |
| Optimization of Periodic Permanent Magnet Configuration in Lorentz-Force EMATs |
3 |
| Detection of Impact Damage in Carbon Fiber Composites Using an Electromagnetic Sensor |
3 |
| Feasibility of a New Moving Collimator for Industrial Backscatter Imaging |
3 |
| Unmanned Aerial Vehicle (UAV)-Based Assessment of Concrete Bridge Deck Delamination Using Thermal and Visible Camera Sensors: A Preliminary Analysis |
3 |
| Eddy Current Testing of Delamination in Carbon Fiber Reinforced Polymer (CFRP): A Finite Element Analysis |
3 |
| Characterization of Hydrogen Embrittlement in 2.25cr-1mo-0.25v Steel by Eddy Current Method |
2 |
| Grain size correction of welding residual stress measurement in a carbon steel plate using the critical refraction of longitudinal waves |
2 |
| Enhancing radiographic imaging of cementitious materials in composite structures with photon attenuating inclusions |
2 |
| Feasibility investigation regarding evaluation of external wall-thickness loss in nonmagnetic tubes using a bobbin-typed electromagnetic acoustic transducer |
2 |
| FISTA Algorithm for Radiography Images Enhancement with Background Blurring Removal |
1 |
| Adaptive Discretization for Computerized Tomography |
1 |
| Modeling and Experimental Studies on 3D-Magnetic Flux Leakage Testing for Enhanced Flaw Detection in Carbon Steel Plates |
1 |
| A New Nomogram Proposal to Determine Concrete Compressive Strength by Combined Nondestructive Testing Methods |
1 |
| Nondestructive Evaluation of Far-Side Corrosion Around a Rivet in a Multilayer Structure |
1 |
| Eddy Current Detection of Retained Austenite in Ni-Hard4 Cast Iron |
1 |
| Evaluation of Aluminium Alloys Degradation in Aging Aircraft |
1 |
| Signal processing techniques for filtering acoustic emission data in prestressed concrete |
1 |
| Optimized Filtered Back-Projection Tomographic Reconstruction Algorithm for the Step-Shift Scanning of a Sample |
1 |
| Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels |
1 |
| A predictive model for characterizing hardness of D2 tool steel by eddy current method: A statistical optimization approach |
0 |
| Automated Quality Characterization for Composites Using Hybrid Ultrasonic Imaging Techniques |
0 |
| Magnetization Time Lag Caused by Eddy Currents and Its Influence on High-Speed Magnetic Flux Leakage Testing |
0 |
| A computational investigation and smooth-shaped defect synthesis for eddy current testing problems using the subregion finite element method |
0 |
| Algorithms for the Magnetic Assessment of Proton Exchange Membrane (PEM) Fuel Cells |
0 |
| Temperature Sensitivity Study of Eddy Current and Digital Gauge Probes for Oxide Measurement |
0 |
| Detecting degradation in reinforced concrete subjected to uniaxial compression, using the parameters of electric response to mechanical impact |
0 |
| Quantile POD for nondestructive evaluation with hit--miss data |
0 |
| Frequency modulated thermal wave imaging for visualizing power density of electromagnetic waves on plane surfaces |
0 |
| Critical examination of ultrasonic transducer characteristics and calibration methods |
0 |
| Evaluation of Bonding Quality in the Carbon Fiber--Reinforced Polymer (CFRP) Composite Laminates by Measurements of Local Vibration Nonlinearity |
0 |
| Feasibility Study for Improving the Image Characteristics in Digital Tomosynthesis (DTS) Using a Compressed-Sensing (Cs)-Based Pre-Deblurring Scheme |
0 |
| Optimization of SAW-type Surface Wave Ultrasonic Sensors for Ultrasonic SHM |
0 |
| Ultrasonic Velocity and Attenuation in Epoxy Resin/Granite (Marble) Powder Composite |
0 |
| Detection and classification of internal defects in limestone blocks based on a deconvolution technique with SI-PLCA applied to GPR signals |
0 |
