| EXPERIMENTAL INVESTIGATION OF MECHANICAL AND FTIR ANALYSIS OF FLAX FIBER/EPDXY COMPOSITES INCORPORATING SiC, Al2O3 AND GRAPHITE |
6 |
| PHOTOCATALYTIC DEGRADATION OF METHYLENE BLUE IN PRESENCE OF ZnO NANOPOWDERS SYNTHESIZED THROUGH A GREEN SYNTHESIS METHOD |
4 |
| STUDY ON CURRENT STATE AND FUTURE TRENDS OF FLUE GAS DESULPHURIZATION TEHNOLOGIES: A REVIEW |
4 |
| INFLUENCE OF POLYMERIC AND NON-POLYMERIC FIBERS IN HYBRID ENGINEERED CEMENTITIOUS COMPOSITES |
3 |
| BEHAVIOR OF HIGH PERFORMANCE FIBRE REINFORCED CONCRETE COMPOSITE BEAMS IN FLEXURE |
3 |
| INFLUENCE OF THE COMPRESSION MOLDING TEMPERATURE ON THERMOMECHANICAL PROPERTIES OF THE BASALT-REINFORCED POLY(LACTIC ACID) (PLA) COMPOSITES |
3 |
| FOAMING GEOPOLYMERS PREPARATION BY ALKALI ACTIVATION OF GLASS WASTE |
3 |
| HYDRATION CHARACTERISTICS OF ALKALI-ACTIVATED SLAG CEMENT |
2 |
| STRUCTURAL PROPERTIES OF LIGHTWEIGHT SELF-COMPACTING CONCRETE MADE WITH PUMICE STONE AND MINERAL ADMIXTURES |
2 |
| MECHANICAL PERFORMANCE OF GLASS FIBER REINFORCED COMPOSITES MADE WITH GYPSUM, EXPANDED PERLITE, AND SILICA SAND |
2 |
| APPLICATION OF RESPONSE SURFACE METHODOLOGY IN THE OPTIMIZATION OF FLY ASH GEOPOLYMER CONCRETE |
2 |
| GRAPHICAL METHOD FOR PROFILING THE SIDE MILL WHICH GENERATE HELICAL FLUTE OF TUNGSTEN CARBIDE DENTAL CROSS CUT BUR |
2 |
| SYNTHESIS OF THE CERAMICS WITH NEPHELINE FROM GEOPOLYMERIC PRECURSORS |
2 |
| PASSING ABILITY, WATER AND CHLORIDE PENETRATION OF SELF-COMPACTING CONCRETE USING MICRO-SILICA AS CEMENTITIOUS REPLACEMENT MATERIAL |
2 |
| INFLUENCE OF ALKALI ACTIVATOR ON THE MAIN PROPERTIES OF INTUMESCENT INORGANIC POLYMERS BASED ON WASTE GLASS AND BORAX |
2 |
| A STUDY ON THE EFFECT OF COLLOIDAL NANO-SILICA ON BLENDED CONCRETE CONTAINING FLY ASH AND ALCCOFINE |
2 |
| CERAMIC THIN FILMS DEPOSITED BY SPIN COATING AS COATINGS FOR METALLIC IMPLANTS |
2 |
| THE EFFECT OF NANO SILICA ON THE PROPERTIES OF CEMENT MORTARS CONTAINING MICRO SILICA AT ELEVATED TEMPERATURES |
1 |
| CHEMICAL STABILITY IN ARTIFICIAL SALIVA OF ZIRCONIA BIOCERAMICS |
1 |
| SYNTHESIZE AND STABILITY ANALYSIS OF PEGYLATED NANOGRAPHENE OXIDE FOR DELIVERY OF DOXORUBICIN |
1 |
| INFLUENCE OF PRESATURATED LIGHT EXPANDED CLAY AND FLY ASH AGGREGATE IN SELF COMPACTING CONCRETE |
1 |
| ZEOLITE-TYPE CATALYSTS USED FOR PYROLYSIS OF VEGETAL WASTE: SYNTHESIS AND CHARACTERIZATION |
1 |
| DEVELOPMENT AND ENGINEERING APPLICATION OF STRONG PERMEABILITY GROUTING MATERIAL FOR WEATHERED GRANITE FORMATION |
1 |
| EXPERIMENTAL STUDY ON MECHANICAL PERFORMANCES OF DIFFERENT FIBRE REINFORCED LIGHTWEIGHT CONCRETES |
1 |
| COMPOSITE MATERIALS BASED ON GYPSUM PLASTER AND INDUSTRIAL WASTES |
1 |
| ABRASIVE WEAR BEHAVIOUR OF POLYAMIDE 6 / POLYPROPYLENE / NANOCLAY COMPOSITES |
1 |
| EFFECTS OF ANTI-FOAMING ADMIXTURE ON PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE |
1 |
| EXPERIMENTAL AND NUMERICAL APPLICATION ON BENDING RESISTANCE OF CONCRETE FILLED STEEL TUBE ARCH AT FIXED ENDS |
1 |
| INVESTIGATION OF STRUCTURAL BEHAVIOR OF COLEMANITE DEPENDING ON TEMPERATURE |
1 |
| COMPOSITE MATERIALS BASED ON MgO AND METALLIC NANOPARTICLES FOR CATALYTIC APPLICATIONS |
1 |
| USE OF GLASS FIBERS AND GLASS SPHERES TO IMPROVE MECHANICAL PROPERTIES OF HUNTITE AND HYDROMAGNESITE REINFORCED FLAME RETARDANT COMPOSITES |
1 |
| INVESTIGATIONS OF STRUCTURAL VIBRATIONAL AND OPTICAL PROPERTIES OF MACKINAWITE NANOSTRUCTURED FeS FILM |
1 |
| OPTIMAL OXIDE COMPOSITION COMPUTATION BY INTEGRATING RAW MATERIALS' CLINKER BURNABILITY |
1 |
| BEHAVIOUR OF CONCRETE UNDER SEVERE ENVIRONMENT - EFFECT OF CARBONATION ON THE CHLORIDE DIFFUSION COEFFICIENT FROM NON-STEADY-STATE MIGRATION TEST |
1 |
| DIFFERENCE BETWEEN NATURAL AND ACCELERATED CARBONATION OF CONCRETE AT 2 % CO2 AND 20 % CO2 |
1 |
| DYNAMIC AND STATIC BEHAVIOUR OF COMPOSITE SANDWICH PLATBANDS WITH KEVLAR HONEYCOMB CORE |
1 |
| PETROLOGICAL CHARACTERISTICS OF BLUE LENTICULAR PATCHES OCCURRING IN THE LOWER GLOBIGERINA BUILDING LIMESTONE OF MALTA |
1 |
| NONFERROUS WASTE FOUNDRY SAND AND MILLING FLY ASH AS ALTERNATIVE LOW MECHANICAL STRENGTH MATERIALS FOR CONSTRUCTION INDUSTRY: EFFECT ON MORTARS AT EARLY AGES |
1 |
| PREPARATION AND PHASE CHARACTERISTICS OF AUTOCLAVED AERATED CONCRETE USING IRON ORE TAILINGS |
1 |
| THE EFFECT OF METAKAOLIN ON INTERNAL SULPHATE ATTACK OF THE HEAT-CURED MORTARS |
1 |
| HYDRATION PROCESS AND PHYSICAL PROPERTIES OF CEMENT SYSTEMS MODIFIED BY CALCIUM CHLORIDE AND MULTI-WALLED CARBON NANOTUBES |
1 |
| MECHANICAL AND THERMAL CHARACTERIZATION OF HTP FIBER REINFORCED LIGHTWEIGHT ENGINEERED CEMENTITIOUS COMPOSITES (HTP-LECC) |
1 |
| SOL-GEL SYNTHESIS OF TiO2-SiO2-GLYMO NANOCOMPOSITE |
1 |
| A STUDY REGARDING THE MECHANICAL PROPERTIES OF COMPOSITES PLATBANDS WITH REINFORCEMENTS FROM BAST FIBERS |
1 |
| STUDY ON A NEW TYPE OF NON-AUTOCLAVED CONCRETE BRICK AND ITS BINDER |
0 |
| DEVELOPMENT OF LOW CONTENT PHOSPHOGYPSUM WASTE COMPOSITES MODIFIED BY LIME-FLY ASH-BASIC OXYGEN FURNACE SLAG |
0 |
| AUTOCLAVED AERATED CONCRETE WASTE AS A MICRO-FILLER FOR PORTLAND CEMENT |
0 |
| THEORETICAL CONSIDERATIONS AND LAB DETERMINATIONS REGARDING CONCRETE SHRINKAGE |
0 |
| FEATURES OF LASER-MACHINED MICRO-TEXTURES ON THE SURFACE OF CEMENTED CARBIDE TOOL |
0 |
| THE LONG TERM BEHAVIOUR OF SOME FLY ASH CONCRETE MIXES SUBJECTED TO DISSOLVING - LEVIGATION CORROSION |
0 |
