| Smart Coating Based on Urea-Formaldehyde Microcapsules Loaded with Benzotriazole for Corrosion Protection of Mild Steel in 3.5 % NaCl |
12 |
| Development of Process for Fast Plasma-Chemical Through Etching of Single-Crystal Quartz in SF6/O-2 Gas Mixture |
8 |
| Ethylene to Propylene Conversion over Ni-W/ZSM-5 Catalyst |
7 |
| Synthesis and Characterization of AlPO4/ZSM-5 Catalyst for Methanol Conversion to Dimethyl Ether |
7 |
| Ethylene to Propylene over Zeolite ZSM-5: Improved Catalyst Performance by Treatment with CuO |
6 |
| Effect of ZnO on Photocatalytic Degradation of Rh B and Its Inhibition Activity for C-coli Bacteria |
6 |
| Investigation on Electrochemical Micromachining (ECMM) of Copper Inorganic Material Using UV Heated Electrolyte |
5 |
| Technologies for Processing of Crude Glycerol from Biodiesel Production: Synthesis of Solketal and Its Hydrolysis to Obtain Pure Glycerol |
5 |
| Effect of Finely Dispersed Chromite on the Physicochemical and Mechanical Properties of Modified Epoxy Composites |
5 |
| Effect of Sonochemical Treatment Modes on the Electrodeposition of Cu-Sn Alloy from Oxalic Acid Electrolyte |
4 |
| Specific Features of Greases Based on Poly-alpha-olefin Oils with Ureate Thickeners of Various Structures |
4 |
| Influence of the Peroxide Vulcanization Coagent on the Properties of a Blend of Polypropylene with Hydrogenated Styrene-Butadiene-Styrene Block Copolymer |
4 |
| Evaluation of Effectiveness of Solid Fuels Based on High Enthalpy Dispersants for Rocket Ramjet Engines |
4 |
| Relationship between the Morphology, Nanostructure, and Strength Properties of AquivionA (R) Type Perfluorinated Proton-Conducting Membranes Prepared by Casting from Solution |
4 |
| Oxidative Functionalization of Asphaltenes from Heavy Crude Oil |
4 |
| Sonochemical Electrodeposition of Copper Coatings |
4 |
| Composite Materials Based on Polylactide and Poly-3-hydroxybutyrate Green Polymers |
4 |
| Hydrothermal Synthesis of Ti-Doped Nickel Hydrosilicates of Various Morphologies |
4 |
| Preparation and Properties of Interpolymer Complexes Capable of Soil Structuring |
3 |
| Composites Based on Polystyrene and Asphaltenes |
3 |
| Magnetic Fe3O4/SiO2/NH2 As the Recyclable Heterogeneous Nanocatalyst on Bisphenol-A Recovery from Polycarbonate Wastes |
3 |
| Effect of Thermal Treatment on the Structure and Properties of Hydroxyapatite |
3 |
| Formation and Properties of a Support Made of Solid Solutions Based on Zirconium Oxide for Single Tubular Solid-Oxide Fuel Cells |
3 |
| Effect of Armoring Composition on the Yield of Nanodiamonds and Content of Impurities |
3 |
| Synthesis of Highly Dispersed Zirconium Carbide |
3 |
| Synthesis and Magnetic Characteristics of Neodymium Ferrite Powders with Perovskite Structure |
3 |
| Sulfated Halloysite Nanoscrolls as Superacid Catalysts for Oligomerization of Hexene-1 |
3 |
| Effect of Antioxidants on Stability of Aqueous Solutions of Selenurea and on Properties of Lead Selenide Films Obtained with These Antioxidants |
3 |
| Nanostructured Hydrotalcite-Supported RuBaK Catalyst for Direct Conversion of Ethylene to Propylene |
3 |
| Oxidative Desulfurization of Hydrocarbon Feedstock |
3 |
| Ruthenium Catalysts on ZSM-5/MCM-41 Micro-Mesoporous Support for Hydrodeoxygenation of Guaiacol in the Presence of Water |
3 |
| Hydrogenation of Indene-Coumarone Resin on Palladium Catalysts for Use in Polymer Adhesives |
3 |
| Structural and Morphological Properties of Boron Doped V2O5 Thin Films: Highly Efficient Photocatalytic Degradation of Methyl Blue |
3 |
| Study of Copper-Iron Mixed Oxide with Cubic Spinel Structure, Synthesized by the Combustion Method |
3 |
| Preparation of Nonwoven Materials for Removal of Oil Spills from Water by Electrospinning of Polylactide Melt |
3 |
| Tribological Performance of Chemically Bonded Phosphate Ceramic Coatings with Different Curing Agents on Mild Steel |
3 |
| Two-Step Electrodialysis Treatment of Monoethanolamine to Remove Heat Stable Salts |
3 |
| Electrolytic Deposition of Hard Chromium Coatings from Electrolyte Based on Deep Eutectic Solvent |
3 |
| Functionality of Lanthanum, Neodymium, and Praseodymium Nickelates as Promising Electrode Systems for Proton-Conducting Electrolytes |
3 |
| Electromagnetic Parameters of Composite Materials Based on Polyethylene and Multi-Walled Carbon Nanotubes Modified by Iron Oxide Nanoparticles |
2 |
| Removal of Heavy Metal Ions from Aqueous Solutions Using Modified Poly(styrene-alt-maleic anhydride) Copolymer as a Chelating Resin |
2 |
| Evaluation of the Hydrodesulfurization Activity in Development of Catalysts for Demetallization of Heavy Petroleum Feedstock |
2 |
| Effect of the Pyrolysis Step on the Filtration Combustion of Solid Organic Fuels |
2 |
| Fire Retardancy of Aluminum Hydroxide Reinforced Flame Retardant Modified Epoxy Resin Composite |
2 |
| Synthesis and Characterization of Novel Magnetic Poly(urethane-imide)/Fe3O4@SiO2-NH2 Nanocomposites |
2 |
| Preparation and Properties of Chemically Bonded Ceramic Coatings Reinforced by GO-TiO2 composites |
2 |
| Electrodeposition of Cu-Sn Alloy from Oxalic Acid Electrolyte in the Presence of Amine-containing Surfactants |
2 |
| Evaporation of Plasticizer from NEPE Type Propellant |
2 |
| Structural Viscosity and Structural Elasticity of Polymer Melts |
2 |
| Synthesis of Polyacrylamide Gels for Restricting the Water Inflow in Development of Oil Fields |
2 |
