| Forecasting Tribological Properties of Wrought AZ91D Magnesium Alloy Using Soft Computing Model |
5 |
| Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation |
5 |
| Physical Methods and Flotation Practice in the Beneficiation of a Low Grade Tungsten-Bearing Scheelite Ore |
4 |
| Formation of Amorphous Structures and Their Crystallization in the Cu-Ti System by High-Energy Ball Milling |
3 |
| SHS Metallurgy of Cr2AlC MAX Phase-Based Cast Materials |
3 |
| Comparative Study of Coatings formed by Electrospark Alloying Using TiC-NiCr and TiC-NiCr- Eu2O3 Electrodes |
3 |
| Foundations of the Fabrication Technology of Wear-Resistant Coatings Made of Mixtures of Chromium Carbide Powders with a Metallic Binder by Explosive Pressing |
3 |
| Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite |
3 |
| Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al-C-TiO2 Powder Mixture |
3 |
| Direct Calcification-Carbonation Method for Processing of Bayer Process Red Mud |
3 |
| Effect of Heat Treatment on the Structure and Properties of Sheet Semifinished Products Made of a Heat-Resistant Alloy Based on Titanium and Alloyed with Rare-Earth Metal |
2 |
| Prediction of Misruns in ML5 (AZ91) Alloy Casting and Alloy Fluidity Using Numerical Simulation |
2 |
| Structure, Mechanical Properties, and Oxidation Resistance of MoSi MoSiB, and MoSiB/SiBC Coatings |
2 |
| Fabrication of the Nb-16Si Alloy Powder for Additive Technologies by Mechanical Alloying and Spheroidization in Electric-Arc Discharge Thermal Plasma |
2 |
| Investigation into the Formation of Texture, Microstructure, and Anisotropy of Properties during Rolling Sheets of the Aluminum-Lithium 1420 Alloy |
2 |
| Protective Coatings La-Mn-Cu-O for Stainless-Steel Interconnector 08D17D cent for SOFC, Obtained by the Electrocrystallization Method from Non-Aqueous Solutions |
2 |
| Fabrication of Silumins Using Silicon Production Waste |
2 |
| Effect of Clay Slime on the Froth Stability and Flotation Performance of Bastnaesite with Different Particle Sizes |
2 |
| Characterization of Ni-Ti Alloy Powders for Use in Additive Manufacturing |
2 |
| Synthesis, Corrosion and Bioactivity Evaluation of Gelatin/Silicon and Magnesium Co-Doped Fluorapatite Nanocomposite Coating Applied on AZ31 Mg Alloys |
2 |
| Studies on Beneficiation and Leaching Characteristics of Rare Earth Elements in Indian Red Mud |
2 |
| Influence of a Magnetic Field on Structure Formation during the Crystallization and Physicomechanical Properties of Aluminum Alloys |
2 |
| Influence of the Magnetic Field on the Crystallization of Aluminum Melts |
2 |
| Substitution Recovery of Gold from Copper-Ethylenediamine-Thiosulfate Leaching Solution with Copper Power |
2 |
| Influence of a Silicon Additive on Resistivity and Hardness of the Al-1% Fe-0.3% Zr Alloy |
2 |
| Use of Calcium in Alloys: From Modifying to Alloying |
2 |
| Synthesis of Ni(Cr)-hBN Nanocomposite by Mechanical Alloying and Its Thermodynamical Evaluation |
1 |
| Fabrication, Microstructure and Properties of the Mid-Fraction SiC Particles/6061Al Composites Using an Optimized Powder Metallurgy Technique |
1 |
| Synthesis of TiC-NiCrBSi Binder Alloy Composite Powders for Cladding and Deposition of Wear-Resistant Coatings |
1 |
| Structure of a Diamond-Matrix Interface and Durability of a Diamond Tool Fabricated by the Metallization of Diamond with Chromium during Sintering of the WC-Co Briquette with Copper Impregnation |
1 |
| Investigation of Heat Source Models and Process Factors on Temperature and Residual Stress in GTAW of Aluminum Plates |
1 |
| SHS-Aided Joining of Ceramic Materials with the Ta Substrate |
1 |
| Mechanical Alloying with the Partial Amorphization of the Fe-Cr-Co-Ni-Mn Multicomponent Powder Mixture and Its Spark Plasma Sintering to Produce a Compact High-Entropy Material |
1 |
| Self-Propagating High-Temperature Synthesis of (Al-2% Mn)-10% TiC and (Al-5% Cu-2% Mn)-10% TiC Nanostructured Composite Alloys Doped with Manganese Powder |
1 |
| Influence of Ultrafine-Grained Structure on the Kinetics and Fatigue Failure Mechanism of VT6 Titanium Alloy |
1 |
| Methods of Compaction of the Al-B-W Powder Composition in a Metal Shell |
1 |
| Production of the Al-B Master Alloy by Aluminothermal Reduction of KBF4 and B2O3 in a Medium of the Molten Salt Flux |
1 |
| Powder Metallurgy in Belarus and Global Developmental Trends |
1 |
| Experimental Study of Combustion Synthesis in Air of ZrB2-Mullite Composite from Different Zirconium Silicate Sources |
1 |
| Influence of Gas Atomization Parameters of the KhN60M Alloy on the Powder Characteristics for Laser Surfacing |
1 |
| Cold Sintering of Fe-Ag and Fe-Cu Nanocomposites by Consolidation in the High-Pressure Gradient |
1 |
| Preparation of Zinc Powders by Acid Electrowinning |
1 |
| Peculiarities of the Synthesis of High-Temperature TaSi2-SiC Ceramics Reinforced in situ by Discrete Silicon Carbide Nanofibers |
1 |
| Structure and Magnetic Properties of WC-50% Co Model Alloys Containing TaC Additives |
1 |
| Temperature Dependence of Heat Capacity and the Variation in Thermodynamic Function of the AZh 4.5 Alloy Doped with Tin |
1 |
| Rational Processing of Refractory Copper-Bearing Ores |
1 |
| A Beneficiation Study on a Low Grade Iron Ore by Gravity and Magnetic Separation |
1 |
| Features of Microstructure Formation in the Ni-Al-W System during SHS |
1 |
| Research into the Possibility of Producing Single-Phase Tantalum-Hafnium Carbide by SHS |
1 |
| Revisiting the Possibility of Formation of Hard Alloys from Powder Mixtures of Carbides with Metals by Explosive Compacting without Sintering |
1 |
