| Effect of Silica Nanoparticles on the Rheological Properties and Filtration Performance of Surfactant-Based and Polymeric Fracturing Fluids and Their Blends |
6 |
| Experimental Investigation of Propellant Fracturing in a Large Sandstone Block |
5 |
| Effect of Ferric Oxide Nanoparticles on the Properties of Filter Cake Formed by Calcium Bentonite-Based Drilling Muds |
4 |
| Evaluating Cement-Plug Mechanical and Hydraulic Integrity |
4 |
| How Do Nanoparticles Stabilize Shale? |
4 |
| Removal of Barite-Scale and Barite-Weighted Water- or Oil-Based-Drilling-Fluid Residue in a Single Stage |
4 |
| Using Ferric Oxide and Silica Nanoparticles To Develop Modified Calcium Bentonite Drilling Fluids |
4 |
| Well-Collision-Avoidance Separation Rule |
3 |
| Laboratory Foamed-Cement-Curing Evolution Using CT Scanning: Insights From Elevated-Pressure Generation |
3 |
| On the Instability of the Cement/Fluid Interface and Fluid Mixing |
3 |
| A Mathematical Model for Predicting Long-Term Productivity of Modern Multifractured Shale-Gas/Oil Wells |
3 |
| A Study of Proppant Transport With Fluid Flow in a Hydraulic Fracture |
3 |
| A Drill Bit and a Drilling Motor With Embedded High-Frequency (1600 Hz) Drilling Dynamics Sensors Provide New Insights Into Challenging Downhole Drilling Conditions |
3 |
| Experimental Evaluation of Wellbore Flow Models Applied to Worst-Case-Discharge Calculations for Oil Wells |
2 |
| Directional Control and Rathole Elimination While Underreaming Depleted Formations With a Rotary-Steerable System |
2 |
| Construction of a 3D Geomechanical Model for Development of a Shale Gas Reservoir in the Sichuan Basin |
2 |
| Extreme Limited-Entry Design Improves Distribution Efficiency in Plug-and-Perforate Completions: Insights From Fiber-Optic Diagnostics |
2 |
| Cuttings-Transport Modeling-Part 1: Specification of Benchmark Parameters With a Norwegian-Continental-Shelf Perspective |
2 |
| Improved Wellbore Stability in North Sea Lark and Horda Shales Through Shale/Fluid-Compatibility Optimization |
2 |
| A Novel Approach to Borehole-Breathing Investigation in Naturally Fractured Formations |
2 |
| Real-Time Condition and Performance Monitoring of a Subsea Blowout Preventer Pipe Ram |
2 |
| Consistent Model for Injection and Falloff Pressure Match of Diagnostic Fracture Injection Tests (DFITs) |
2 |
| The Effect of Layered Modulus on Hydraulic-Fracture Modeling and Fracture-Height Containment |
2 |
| High-Frequency At-Bit Measurements Provide New Insights Into Torsional Dynamics When Drilling With Steerable Mud Motors in Unconventional Horizontal Wells |
1 |
| On the Sealability of Metal-to-Metal Seals With Application to Premium Casing and Tubing Connections |
1 |
| Study of Oil Country Tubular Goods Casing and Liner Wear Mechanism on Corrosion-Resistant Alloys |
1 |
| Understanding Lost Circulation While Cementing: Field Study and Laboratory Research |
1 |
| Analyzing Unexpected Sanding Issues in the High-Pressure/High-Temperature, Tight-Sandstone Keshen Gas Reservoir, Western China |
1 |
| Theoretical and Experimental Investigation of Coiled-Tubing Deformation Under Multiaxial Cyclic Loading |
1 |
| Wellbore-Stability Analysis Considering the Weak Bedding Planes Effect: A Case Study |
1 |
| Well-Collision-Avoidance Management and Principles |
1 |
| A New Method of Backup-Cutter Layout To Extend Bit Life Without Sacrificing Rate of Penetration |
1 |
| Design and Calculation of Complex Directional-Well Trajectories on the Basis of the Minimum-Curvature Method |
1 |
| Borehole-Breathing/Kick Discriminator: Diagnostic Tool and Potential Resource for In-Situ Formation Characterization |
1 |
| Improving Casing Integrity With Induction Brazing of Casing Connections |
0 |
| Subsea Wellhead Life-cycle-Fatigue Analysis and the Role of Well Temperature |
0 |
| Triaxial Limit and Safety Factor of an Anisotropic Corrosion-Resistant Alloy Tubular |
0 |
| Rapid Crosslinking Polymer Provides an Additional Blowout-Preventer Barrier |
0 |
| Multizone Casedhole Frac Packs and Intelligent-Well Systems Improve Recovery in Subsea Gas Fields |
0 |
| CFD Modeling of Hydraulic Behavior of Oil- and Water-Based Drilling Fluids in Laminar Flow |
0 |
| Impact of Rotation During Installation on the Structural Performance of Slotted Liners in Thermally Stimulated Wells |
0 |
| Strategic Evaluation of Managed Pressure Drilling: An Application on Brazilian Dynamic-Positioning Rigs |
0 |
| Influence of Frictional or Rotational Kinetic Energy on Wellbore-Fluid/Temperature Profiles During Drilling Operations |
0 |
| Field Validation of a New Bottomhole-Assembly Model for Unconventional Shale Plays |
0 |
| How To Manage Geomagnetic-Field Disturbances in the Northern Auroral Zone To Improve the Accuracy of Magnetic Measurement-While-Drilling Directional Surveys |
0 |
| Polyelectrolyte-Complex Nanoparticles for Fluid-Loss Control in Oilwell Cementing |
0 |
| A Newly Developed Wellbore-Simulation Apparatus To Study Performance of Oilwell Cements |
0 |
| Advancements in Annular-Pressure-Buildup Mitigation for Thunder Horse Wells |
0 |
| New Tubular-Design Ellipse With Backup Pressure |
0 |
| Evaluation of the Elevated-Temperature Performance and Degradation Mechanisms of Thread Compounds |
0 |
