| Lignin - a promising biomass resource |
7 |
| Wet-end addition of nanofibrillated cellulose pretreated with cationic starch to achieve paper strength with less refining and higher bulk |
6 |
| Activated carbon from potassium hydroxide spent liquor lignin using phosphoric acid |
4 |
| Effects of lignin chemistry on oxygen delignification performance |
3 |
| Rewet in wet pressing of paper |
3 |
| Upscaling of foam forming technology for pilot scale |
3 |
| Research needs for nanocellulose commercialization and applications |
2 |
| A review of green liquor scale formation |
2 |
| Progress in foam forming technology |
2 |
| Photo-catalytic degradation of gaseous pollutants in paper mills of southern China |
2 |
| Lignin-based resins for kraft paper applications |
2 |
| &ITStatic and dynamic sorption of lignin removed&IT Populus euramericana |
2 |
| Evaluation of the out-of-plane response of fiber networks with a representative volume element model |
2 |
| Characterization and evaluation of antioxidation of lignin from bamboo powder using a formic acid-catalyzed ethanol organosolv process |
2 |
| Prediction of box failure from paper data for asymmetric corrugated board |
2 |
| Dielectric spectroscopic studies of biological material evolution and application to paper |
2 |
| Mineral/microfibrillated cellulose composite materials: High performance products, applications, and product forms |
1 |
| Magnetization of aminated lignin and characterization |
1 |
| Synthesis and characterization of novel foams by pyrolysis of lignin |
1 |
| Using online bubble size and total dissolved solids measurements to investigate the performance of oxygen delignification |
1 |
| Lignocellulose fibers elaborating super-swollen three-dimensional cellulose hydrogels from solution in N,N-dimethylacetamide/lithium chloride |
1 |
| Fundamental molecular characterization and comparison of the D- and E stage effluents from hardwood pulp bleaching |
1 |
| Fabrication of cross-linked starch-based nanofibrous mat with optimized diameter |
1 |
| Priorities for development of standard test methods to support the commercialization of cellulose nanomaterials |
1 |
| Kraft pulp bleaching with a P-stage catalyzed by both bicarbonate and TAED |
1 |
| Evaluation of novel drum chipper technology: pilot-scale production of short wood chips |
1 |
| The solubility of calcium carbonate in green liquor handling systems |
1 |
| Prehydrolysis kraft pulping of jute cutting and caddis mixture for rayon production |
1 |
| Real-time monitoring of bubble size distribution in a foam forming process |
1 |
| Controlling porosity and density of nanocellulose aerogels for superhydrophobic light materials |
1 |
| An effective method for determining the retention and distribution of cellulose nanofibrils in paper handsheets by dye labeling |
1 |
| Removal of phthalate from papermaking wastewater by MIL-101(Fe) in the presence of persulfate |
1 |
| A study of the softness of household tissues using a tissue softness analyzer and hand-felt panels |
1 |
| Effect of ring formation on burner flame stability in lime kilns |
1 |
| On the nominal transverse shear strain to characterize the severity of creasing |
1 |
| Polyvinyl alcohol as foaming agent in foam formed paper |
0 |
| Factors affecting particulate removal efficiency of kraft recovery boiler electrostatic precipitators: a technical review |
0 |
| Use of vent stack temperature as a feedforward variable for dissolver total titratable alkali (TTA) control |
0 |
| A hundred years of corrosion in the pulp and paper industry |
0 |
| Importance of specimen preparation for edgewise compressive strength (ECT) testing |
0 |
| Monitoring the free lime content in lime mud using zeta potential |
0 |
| Online measurement of bulk, tensile, brightness, and ovendry content of bleached chemithermomechanical pulp using visible and near infrared spectroscopy |
0 |
| Size distribution analysis of microstickies treated by enzyme mixtures in papermaking whitewater |
0 |
| Evaluating hardness and the S-test |
0 |
| Dry chip feedrate control using online chip moisture |
0 |
| Controllable anisotropic properties of wet-laid hydroentangled nonwovens |
0 |
| Effect of pH and enzymes on strength of recycled fibers during refining |
0 |
| Production of polyhydroxyalkanoates (PHA)-based renewable packaging materials using photonic energy: A bench and pilot-scale study |
0 |
| Laboratory method for determining the source of brightness loss at a southern United States bleached paperboard mill |
0 |
| Sources, collection, and handling of noncondensible gases in modern kraft pulp mills |
0 |
