| Time-resolved and In-situ Observation of delta-gamma Transformation during Unidirectional Solidification in Fe-C Alloys |
6 |
| Detection of Free-lime in Steelmaking Slag by Cathodoluminescence Method |
6 |
| Crystal Plasticity Simulation on Effect of Heterogeneous-nanostructure Induced by Severe Cold-rolling on Mechanical Properties of Austenitic Stainless Steel |
4 |
| Evaluation of Coke Degradation Effect on Flow Characteristics in Packed Bed Using 3D Scanning for Rotational Mechanical Strength Test and Solid-liquid-gas Three-phase Dynamic Model Analysis |
4 |
| Development of Microstructurally Small Fatigue Crack Initiation and Growth Evaluation Method Using Automatic In-situ Observation System with Digital Image Correlation Technique |
4 |
| Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel |
4 |
| Discussion about Procedure for Determining Parameter alpha in Modified Williamson-Hall Method |
4 |
| Overview of Dynamic Strain Aging and Associated Phenomena in Fe-Mn-C Austenitic Steels |
4 |
| Phase-field Simulation of Recrystallization in Cold Rolling and Subsequent Annealing of Pure Iron Exploiting EBSD Data of Cold-rolled Sheet |
3 |
| Development of Shape Meter Employing LED Dot Pattern Projection Method for Hot Strip Finishing Mill |
3 |
| Evaluation of Solidified Shell Thickness by Thermocouple in Mold |
3 |
| Unique Mechanical Properties of Harmonic Structure Designed Materials |
2 |
| Fatigue Fracture of Duplex Stainless Steel with Heterogeneous Nanostructure by Heavy Cold Rolling |
2 |
| Dynamic Accommodation of Internal Stress and Selection of Crystallographic Orientation Relationship in Pearlite |
2 |
| Hydrogen Embrittlement Susceptibility Evaluation of Tempered Martensitic Steels Showing Different Fracture Surface Morphologies |
2 |
| Effect of Lime Dissolution Rate in Slag on Hot Metal Dephosphorization |
2 |
| Perspective toward Long-term Global Goal for Carbon Dioxide Mitigation in Steel Industry |
2 |
| Complete Melting of Steelmaking Slag and Behavior of Alkali Dissolution |
2 |
| Effect of Initial Microstructure on Creep Strength of ASME Grade T91 Steel |
2 |
| Long-term Alkali Elution Behavior from Steelmaking Slag into Seawater by an Open Channel Vessel |
2 |
| Estimation of the Effective Grain Size Controlling Brittle Crack Arrest Toughness of High-strength Steel |
2 |
| Influences of Effective Grain Size and Ni Content on Brittle Crack Arrest Toughness of High Strength Steel Plates |
2 |
| Effect of Grain Size and Dislocation Density on Strain-Induced Martensitic Transformation in Austenitic Stainless Steels |
2 |
| Behavior of Crystallization on a Continuous Solidification Process of Blast Furnace Slag |
2 |
| Dynamic Control of Flatness and Elongation of the Strip in a Skin Pass Mill |
2 |
| Effect of Surface Textures of Steel Sheets on the Crystal Orientation of Electrodeposited Zinc |
2 |
| Lattice Defect Formation Behavior of Cold-drawn Pearlitic Steel Fractured under Elastic and Plastic Region in the Presence of Hydrogen |
1 |
| Effect of Particle Velocity on Penetration and Flotation Behavior |
1 |
| Continuous Cooling Transformation Characteristics of Ti-5Al-2Fe-3Mo |
1 |
| Effect of Grain Size on the Yield Stress of Cold Worked Iron |
1 |
| In-situ Observation of Dislocation Evolution in Ferritic and Austenitic Stainless Steels under Tensile Deformation by Using Neutron Diffraction |
1 |
| Effect of Natural Gas Injection Point on Combustion and Gasification Efficiency of Pulverized Coal under Blast Furnace Condition |
1 |
| Structural and Mechanical Characterizations of Top Dross in a Molten Zinc Bath |
1 |
| Fatigue Crack Growth under Non-proportional Mixed Mode I/III Loading in Rail and Wheel Steel |
1 |
| Impact Property of Case Hardening Steel Subjected to Combined Heat Treatment with Excess Vacuum Carburizing and Subsequent Induction Hardening |
1 |
| Relation between Mass Transfer Coefficient and Stirring Power during Gas Bubbling in Molten Steel |
1 |
| Reliable Evaluation of Long-term Creep Properties at Elevated Temperature |
1 |
| Modeling and Crystal Plasticity Analysis of Multiple Slip Deformation in the Microstructure of Particle Dispersed Alloy and Its Macroscopic Strain Hardening Characteristics |
1 |
| Development of On-site Measurement Technique of Retained Austenite Volume Fraction by Compact Neutron Source RANS |
1 |
| Mechanical Property of Ultrafine Elongated Grain Structure Steel Processed by Warm Tempforming and Its Application to Ultra-High-Strength Bolt |
1 |
| Crystal Plasticity Analysis on Ductility of Ferrite/Cementite Multilayers: Effect of Dislocation Absorption Ability of the Hetero Interface |
1 |
| Effect of Nitrogen-less Reducing Atmosphere on Permeability of Cohesive Layer in Blast Furnace |
1 |
| Influence of Si Addition on Reduction Behavior of Fe Oxide on Mn-Added Steel Sheet |
1 |
| Elucidating Electrochemical Properties at the Boundary between MnS and Steel Matrix: Towards the Improvement of Pitting Corrosion Resistance of Stainless Steels |
1 |
| Growth Behavior of a Mechanically Long Fatigue Crack in an FeCrNiMnCo High Entropy Alloy: A Comparison with an Austenitic Stainless Steel |
1 |
| Heterogeneous Nano-structure and Its Evolution in Heavily Cold-rolled SUS316LN Stainless Steels |
1 |
| First-principles Calculations of the Effects of Mn, Cr, and Ni on Hydrogen Diffusion in BCC, FCC, and HCP Fe |
1 |
| Effect of Lattice Defects on Tribological Behavior for High Friction Coefficient under TCP added PAO Lubrication in Nanostructured Steels |
1 |
| Transmission Electron Microscopic Observation of Layered Double Hydroxide Films Formed on Aluminum Alloys Prepared by Steam Coating Process |
1 |
| Phase-field Simulation of the Effect of Interphase Boundary Diffusion on Pearlite Transformation in Fe-C System |
1 |
