| Advances in Diagnostic Methods for Zika Virus Infection |
8 |
| An Inertia-Deformability Hybrid Circulating Tumor Cell Chip: Design, Clinical Test, and Numerical Analysis |
5 |
| Programmable Multistable Mechanisms for Safe Surgical Puncturing |
3 |
| Design and Experimental Validation of an Active Catheter for Endovascular Navigation |
3 |
| Process Structure Property Relationships in Selective Laser Melting of Porosity Graded Gyroids |
2 |
| Design and Performance Study of a Novel Minimally Invasive Active Surgical Needle |
2 |
| Computational Design of a Single Heater Convective Polymerase Chain Reaction for Point-of-Care |
2 |
| Percutaneous Ultrasound Gastrostomy: A Novel Device and Bedside Procedure for Gastrostomy Tube Insertion Using Magnetic and Ultrasound Guidance |
2 |
| A Systematic Review of Noninvasive Electrocardiogram Monitoring Devices for the Evaluation of Suspected Cardiovascular Syncope |
2 |
| A Novel Macroscale Acoustic Device for Blood Filtration |
2 |
| Estimation of the Two Degrees-of-Freedom Time-Varying Impedance of the Human Ankle |
2 |
| The Effect of Different Sterilization Methods on Polypropylene Syringes |
1 |
| Development and Feasibility of a Robotic Laparoscopic Clipping Tool for Wound Closure and Anastomosis |
1 |
| Design of a Novel Three-Dimensional-Printed Two Degrees-of-Freedom Steerable Electrosurgical Grasper for Minimally Invasive Surgery |
1 |
| Water Jet Applicator for Interface Tissue Removal in Minimally Invasive Hip Refixation: Testing the Principle and Design of Prototype |
1 |
| Measurement of Frictional Properties of Aortic Stent Grafts and Their Delivery Systems |
1 |
| An Electronic Force Sensor for Medical Jet Injection |
1 |
| Compact Two Degrees-of-Freedom External Fixator System for Correction of Persistent Clubfoot Deformity |
1 |
| Value-Based Care: A Review of Key Challenges and Opportunities Relevant to Medical Technology Innovators |
1 |
| Dynamic Compression Garments for Sensory Processing Disorder Treatment Using Integrated Active Materials |
1 |
| Utilization of Cable Guide Channels for Compact Articulation Within a Dexterous Three Degrees-of-Freedom Surgical Wrist Design |
1 |
| Improved Method for the ASTM Platelet and Leukocyte Assay: Use of Minimal Heparinization in a Screening Test for Hemocompatibility of Blood-Contacting Medical Devices |
1 |
| An Investigation Into the Challenges of Using Metal Additive Manufacturing for the Production of Patient-Specific Aneurysm Clips |
1 |
| Custom Patient-Specific Three-Dimensional Printed Mitral Valve Models for Pre-Operative Patient Education Enhance Patient Satisfaction and Understanding |
1 |
| Toward Dosing Precision and Insulin Stability in an Artificial Pancreas System |
1 |
| Cardiac Magnetic Resonance Imaging of Mechanical Cavopulmonary Assistance |
1 |
| Investigating the Mechanical Properties of Biological Brain Cells With Atomic Force Microscopy |
1 |
| Using Simulation to Help Specify Design Parameters for Vacuum-Assisted Needle Biopsy Systems |
1 |
| Characterization of a Novel Emergency Suction Device for Combat Medics |
1 |
| Lower Limb Assistive Device Design Optimization Using Musculoskeletal Modeling:A Review |
1 |
| Hydrogel-Shielded Soft Tactile Sensor for Biocompatible Drug Delivery Monitoring |
1 |
| A Coronally Clutching Ankle to Improve Amputee Balance on Coronally Uneven and Unpredictable Terrain |
1 |
| Vibration-Assisted Slicing of Soft Tissue for Biopsy Procedures |
1 |
| Children and Adults With Rare Diseases Need Innovative Medical Devices |
1 |
| Tissue Deformation and Insertion Force of Bee-Stinger Inspired Surgical Needles |
1 |
| Organ-on-Chip Devices Toward Applications in Drug Development and Screening |
1 |
| Pulsatile Perfusion Bioreactor for Biomimetic Vascular Impedances |
1 |
| Electromechanical Model-Based Design and Testing of Fiber Scanners for Endoscopy |
1 |
| Electrokinetic Behavior of Heat-Treated Mycobacterium Bacillus Calmette-Guerin Cells |
1 |
| Analysis of Magnetic Microbead Capture With and Without Bacteria in a Microfluidic Device Under Different Flow Scenarios |
0 |
| A Novel, Needle-Array Dry-Electrode With Stainless Steel Micro-Tips, for Electroencephalography Monitoring |
0 |
| Development of an Alveolar Transbronchial Catheter for Concurrent Fiber Optics-Based Imaging and Fluid Delivery |
0 |
| Novel Miniature Tip Design for Enhancing Dexterity in Minimally Invasive Surgery |
0 |
| Creating a Small Anchor to Eliminate Large Knots in Mesh and Tape Suture |
0 |
| The Role of Impulse, Tissue Stretching, and Tip Geometry for Tissue Penetration of Polymer Needles |
0 |
| A Specimen Extraction Instrument Based on Braided Fiber Tube for Natural Orifice Translumenal Endoscopic Surgery |
0 |
| Variable Geometry Stair Ascent and Descent Controller for a Powered Lower Limb Exoskeleton |
0 |
| Novel Design and Validation of a Micro Instrument in an Ear Grommet Insertion Device |
0 |
| Engineering Evaluation of the Performance of an Automatic Peripheral Oxygen Controller Using a Neonatal Respiratory Model |
0 |
| Optimization of an Endoscopic Radiofrequency Ablation Electrode |
0 |
