| Microstructure and Mechanical Properties of Mg-RE-TM Cast Alloys Containing Long Period Stacking Ordered Phases |
22 |
| Recent Progress and Development in Extrusion of Rare Earth Free Mg Alloys |
18 |
| Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments |
16 |
| Research Progress on the Corrosion Behavior of Magnesium-Lithium-Based Alloys: A Review |
15 |
| Influence of Zn Content on Microstructure and Tensile Properties of Mg-Zn-Y-Nd Alloy |
12 |
| Selective Laser Melting of 30CrMnSiA Steel: Laser Energy Density Dependence of Microstructural and Mechanical Properties |
11 |
| Effect of Solution Treatment on the Microstructure and Mechanical Properties of Sand-Cast Mg-9Gd-4Y-0.5Zr Alloy |
10 |
| A High-Ductility Mg-Zn-Ca Magnesium Alloy |
9 |
| Effects of Passes on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy During Multidirectional Forging |
9 |
| Recent Research on the Deformation Behavior of Particle Reinforced Magnesium Matrix Composite: A Review |
9 |
| Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon |
8 |
| Enhanced Strength and Corrosion Resistance of Mg-2Zn-0.6Zr Alloy with Extrusion |
8 |
| Enhanced Microwave Absorption Properties of Double-Layer Absorbers Based on Spherical NiO and Co0.2Ni0.4Zn0.4Fe2O4 Ferrite Composites |
8 |
| Modification of Corrosion Resistance of the Plain Carbon Steels by Pulsed Electric Current |
8 |
| Influence of Processing Parameters on Microstructural Evolution and Tensile Properties for 7075 Al Alloy Prepared by an ECAP-Based SIMA Process |
7 |
| Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Friction Stir-Welded AZ31 Magnesium Alloy |
7 |
| Influence of Voltage on the Corrosion and Wear Resistance of Micro-Arc Oxidation Coating on Mg-8Li-2Ca Alloy |
7 |
| Influence of Initial Microstructure on the Strengthening Effect of Extruded Mg-8Sn-4Zn-2Al Alloys |
7 |
| Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering |
7 |
| Hot Deformation Behavior of a New Nuclear Use Reduced Activation Ferritic/Martensitic Steel |
7 |
| Hot Deformation Behavior and Dynamic Recrystallization Characteristics in a Low-Alloy High-Strength Ni-Cr-Mo-V Steel |
7 |
| Biodegradation Behavior of Coated As-Extruded Mg-Sr Alloy in Simulated Body Fluid |
7 |
| A Novel Series of Refractory High-Entropy Alloys Ti2ZrHf0.5VNbx with High Specific Yield Strength and Good Ductility |
6 |
| Effect of pH on the Electrochemical Behaviour and Passive Film Composition of 316L Stainless Steel |
6 |
| Functionally Graded Stainless Steel Fabricated by Direct Laser Deposition: Anisotropy of Mechanical Properties and Hardness |
6 |
| Influence of Deformation Degree and Cooling Rate on Microstructure and Phase Transformation Temperature of B1500HS Steel |
6 |
| Evolution of Microstructure, Residual Stress, and Tensile Properties of Mg-Zn-Y-La-Zr Magnesium Alloy Processed by Extrusion |
6 |
| Microstructure, Mechanical Properties, and Corrosion Behavior of MoNbFeCrV, MoNbFeCrTi, and MoNbFeVTi High-Entropy Alloys |
6 |
| Horizontally Solidified Al-3wt%Cu-(0.5wt%Mg) Alloys: Tailoring Thermal Parameters, Microstructure, Microhardness, and Corrosion Behavior |
6 |
| Microstructural Feature and Evolution of Rapidly Solidified Ni3Al-Based Superalloys |
6 |
| Design of Fe-Mn-Ag Alloys as Potential Candidates for Biodegradable Metals |
6 |
| Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering |
6 |
| Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding |
6 |
| Improvement of High-Temperature Mechanical Properties of Low-Carbon RAFM Steel by MX Precipitates |
6 |
| Enhanced Surface Mechanical Properties and Microstructure Evolution of Commercial Pure Titanium Under Electropulsing-Assisted Ultrasonic Surface Rolling Process |
6 |
| Effect of Microstructure on Corrosion Behavior of Mg-Sr Alloy in Hank's Solution |
5 |
| Fe-Based Powders Prepared by Ball-Milling with Considerable Degradation Efficiency to Methyl Orange Compared with Fe-Based Metallic Glasses |
5 |
| EBSD Study of Microstructural and Textural Changes of Hot-Rolled Ti-6Al-4V Sheet After Annealing at 800 degrees C |
5 |
| Gradient Elastic-Plastic Properties of Expanded Austenite Layer in 316L Stainless Steel |
5 |
| Enhancements of Passive Film and Pitting Resistance in Chloride Solution for 316LX Austenitic Stainless Steel After Sn Alloying |
5 |
| Effects of Crystal Orientations on the Low-Cycle Fatigue of a Single-Crystal Nickel-Based Superalloy at 980 degrees C |
5 |
| Thermal Stability of WB2 and W-B-N Films Deposited by Magnetron Sputtering |
5 |
| Cracking Behavior in Additively Manufactured Pure Tungsten |
5 |
| Ultrafine-Grained Microstructure and Improved Mechanical Behaviors of Friction Stir Welded Cu and Cu-30Zn Joints |
5 |
| Microstructure Evolution and Pore Formation Mechanism of Porous TiAl3 Intermetallics via Reactive Sintering |
5 |
| Stern-Geary Constant for X80 Pipeline Steel in the Presence of Different Corrosive Microorganisms |
5 |
| A Novel Cu-GNPs Nanocomposite with Improved Thermal and Mechanical Properties |
5 |
| High-Temperature Structural Stabilities of Ni-Based Single-Crystal Superalloys Ni-Co-Cr-Mo-W-Al-Ti-Ta with Varying Co Contents |
5 |
| Corrosion Resistance of Silane-Modified Hydroxyapatite Films on Degradable Magnesium Alloys |
5 |
| Mathematical modeling of nanodispersed hardening of FCC materials |
5 |
