| Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes: A Review |
39 |
| A Review on Melt-Pool Characteristics in Laser Welding of Metals |
26 |
| Assessment of Acoustic Emission and Triaxial Mechanical Properties of Rock-Cemented Tailings Matrix Composites |
16 |
| Carbon Nanostructure-based Sensors: A Brief Review on Recent Advances |
15 |
| Effect of Cyclic Freezing-Thawing on the Shear Mechanical Characteristics of Nonpersistent Joints |
14 |
| Mechanical Characterization of Lightweight Foamed Concrete |
13 |
| Free Vibrations and Nonlinear Responses for a Cantilever Honeycomb Sandwich Plate |
12 |
| Effect of Molybdenum on the Corrosion Behavior of High-Entropy Alloys CoCrFeNi2 and CoCrFeNi2Mo0.25 under Sodium Chloride Aqueous Conditions |
11 |
| Strength and Deformation Properties of Fiber and Cement Reinforced Heavy Metal-Contaminated Synthetic Soils |
11 |
| Experimental Study on Wind Erosion Resistance and Strength of Sands Treated with Microbial-Induced Calcium Carbonate Precipitation |
10 |
| Mechanical Properties and Durability of Latex-Modified Fiber-Reinforced Concrete: A Tunnel Liner Application |
10 |
| A Review on Diffusion Bonding between Titanium Alloys and Stainless Steels |
8 |
| Critical Review of Fluid Flow Physics at Micro- to Nano-scale Porous Media Applications in the Energy Sector |
8 |
| Experimental Investigation of Mechanical Behaviors of Fiber-Reinforced Fly Ash-Soil Mixture |
8 |
| Functionally Graded Materials: An Overview of Stability, Buckling, and Free Vibration Analysis |
8 |
| Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology |
8 |
| Influence of Ground Temperature on Shotcrete-to-Rock Adhesion in Tunnels |
8 |
| A Mix Design Procedure for Alkali-Activated High-Calcium Fly Ash Concrete Cured at Ambient Temperature |
7 |
| Study on Damping Energy Dissipation Characteristics of Cylindrical Metal Rubber in Nonforming Direction |
7 |
| Synthesis and Characterization of Reduced Graphene Oxide (rGO) Started from Graphene Oxide (GO) Using the Tour Method with Different Parameters |
7 |
| Fly Ash/Blast Furnace Slag-Based Geopolymer as a Potential Binder for Mine Backfilling: Effect of Binder Type and Activator Concentration |
7 |
| Biological Resistance and Application Properties of Particleboards Containing Nano-Zinc Oxide |
7 |
| Fresh and Mechanical Properties of Self-Compacting Rubber Lightweight Aggregate Concrete and Corresponding Mortar |
7 |
| Comparison of Micro-EDM Characteristics of Inconel 706 between EDM Oil and an Al Powder-Mixed Dielectric |
7 |
| Corrosion Behavior of Alloy C-276 in Supercritical Water |
7 |
| Fabrication of ABS/Graphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing |
7 |
| A Review on Superplastic Formation Behavior of Al Alloys |
7 |
| Isolation and Characterization of Nanofibrillar Cellulose from Agave tequilana Weber Bagasse |
6 |
| Silica-Reinforced Natural Rubber: Synergistic Effects by Addition of Small Amounts of Secondary Fillers to Silica-Reinforced Natural Rubber Tire Tread Compounds |
6 |
| Strength Characteristics and the Reaction Mechanism of Stone Powder Cement Tailings Backfill |
6 |
| Structural and Electrical Properties of Graphene Oxide-Doped PVA/PVP Blend Nanocomposite Polymer Films |
6 |
| Acoustic Emission and Damage Characteristics of Granite Subjected to High Temperature |
6 |
| Experimental Study and Application of a Novel Foamed Concrete to Yield Airtight Walls in Coal Mines |
6 |
| Bricks and Concrete Wastes as Coarse and Fine Aggregates in Sustainable Mortars |
6 |
| Effect of Friction Stir Processing on Gas Tungsten Arc-Welded and Friction Stir-Welded 5083-H111 Aluminium Alloy Joints |
6 |
| Synthesis and Characterization of Porous Fly Ash-Based Geopolymers Using Si as Foaming Agent |
6 |
| Dowel Behavior of Rebars in Small Concrete Block for Sliding Slab Track on Railway Bridges |
6 |
| Attenuation Characteristics of Stress Wave Peak in Sandstone Subjected to Different Axial Stresses |
6 |
| Review on Cement Stabilization/Solidification of Municipal Solid Waste Incineration Fly Ash |
6 |
| Effects of Nano-CaCO3/Limestone Composite Particles on the Hydration Products and Pore Structure of Cementitious Materials |
6 |
| Effect of Recycling Agents on Rheological and Micromechanical Properties of SBS-Modified Asphalt Binders |
6 |
| Synthesis of Silver Nanoparticles Using Orange Peel Extract Prepared by Plasmochemical Extraction Method and Degradation of Methylene Blue under Solar Irradiation |
6 |
| Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber |
5 |
| Structural, Optical, and Electrical Characterization of beta-Ga2O3 Thin Films Grown by Plasma-Assisted Molecular Beam Epitaxy Suitable for UV Sensing |
5 |
| Understanding the Preferred Crystal Orientation of Sputtered Silver in Ar/N-2 Atmosphere: A Microstructure Investigation |
5 |
| Mechanical and Self-Sensing Properties of Multiwalled Carbon Nanotube-Reinforced ECCs |
5 |
| Development of Epoxy-Polyester Composite with Improved Thermophysical Properties for Restoration of Details of Sea and River Transport |
5 |
| Study on Preparation of Water-Soluble Chitosan with Varying Molecular Weights and Its Antioxidant Activity |
5 |
| A Case Study on the Control of Large Deformations in a Roadway Located in the Du'erping Coal Mine in China |
5 |
| Experimental Study on the Durability of Fly Ash-Based Filling Paste in Environments with Different Concentrations of Sulfates |
5 |
