| Single point incremental forming: state-of-the-art and prospects |
15 |
| Hybrid constitutive modeling: data-driven learning of corrections to plasticity models |
12 |
| Extension of the sensitivity-based virtual fields to large deformation anisotropic plasticity |
8 |
| Hot working of Ti-6Al-4V with a complex initial microstructure |
8 |
| Process optimization in the self-reacting friction stir welding of aluminum 6061-T6 |
8 |
| On the study of mystical materials identified by indentation on power law and Voce hardening solids |
7 |
| Flow curves up to high strains considering load reversal and damage |
6 |
| Specific features of flax fibres used to manufacture composite materials |
6 |
| The bending dependency of forming limit diagrams |
6 |
| Control of the material flow in sheet-bulk metal forming using modifications of the tool surface |
5 |
| Numerical and experimental investigations in electromagnetic riveting with different rivet dies |
5 |
| Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers |
4 |
| Numerical investigation of the influence of frictional conditions in thread rolling operations with flat dies |
4 |
| Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model |
4 |
| Development of a hot stamped channel section with axially tailored properties - experiments and models |
4 |
| Effects of material and process parameters on in-situ consolidation |
4 |
| A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals |
4 |
| Numerical simulation of metal forming processes with 3D adaptive Remeshing strategy based on a posteriori error estimation |
4 |
| Two-way approach for deformation analysis of non-crimp fabrics in uniaxial bias extension tests based on pure and simple shear assumption |
4 |
| On the synergy between physical and virtual sheet metal testing: calibration of anisotropic yield functions using a microstructure-based plasticity model |
4 |
| On the numerical implementation of a shear modified GTN damage model and its application to small punch test |
4 |
| Stress and strain distribution in twist extrusion of AA6063 aluminum alloy |
4 |
| Numerical modeling of local capillary effects in porous media as a pressure discontinuity acting on the interface of a transient bi-fluid flow |
3 |
| Large scale additive manufacturing of eco-composites |
3 |
| Study on springback from thermal-mechanical boundary condition imposed to V-bending and L-bending processes coupled with infrared rays local heating |
3 |
| Numerical investigation of an arc inlet structure extrusion die for large hollow sections |
3 |
| Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion |
3 |
| 3D FEM-DEM coupling analysis for granular-media-based thin-wall elbow tube push-bending process |
3 |
| Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties |
3 |
| Experimental characterization and analysis of fiber orientations in hemispherical thermostamping for unidirectional thermoplastic composites |
3 |
| Coupled effects of initial orientation scatter and grain-interaction to texture evolution: a crystal plasticity FE study |
3 |
| Shape accuracy analysis of multi-point forming process for sheet metal under normal full constrained conditions |
3 |
| The generation of the forming path with the springback compensation in the CNC incremental forming |
3 |
| Resin flow modeling in compliant porous media: an efficient approach for liquid composite molding |
3 |
| Process parameter influence on texture heterogeneity in asymmetric rolling of aluminium sheet alloys |
3 |
| Inverse thermal mold design for injection molds Adressing the local cooling demand as quality function for an inverse heat transfer problem |
3 |
| Investigating the effects of cross wedge rolling preforming operation and die forging with flash brakes on forging titanium hip implants |
3 |
| Influence of the forming angle in cross wedge rolling on the multi-directional forging of crankshafts |
3 |
| A model to describe hardening behavior of Zircaloy-4 tube during cold pilgering process |
3 |
| Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel |
3 |
| Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model |
3 |
| Experimental and numerical study of a new hybrid process: multi-point incremental forming (MPIF) |
3 |
| Shear and drape behavior of non-crimp fabrics based on stitching geometry |
3 |
| Development of a three-dimensional finite element method simulation model to predict modified flow drilling tool performance |
3 |
| A novel analytical model to predict springback of DP780 steel based on modified Yoshida-Uemori two-surface hardening model |
3 |
| Low-cost metal-forming process using an elastic punch and a reconfigurable multi-pin die |
2 |
| Local strain measurements of yarns inside of 3D warp interlock fabric during forming process |
2 |
| Contact geometry estimation and precise radial force prediction for the radial-axial ring rolling process |
2 |
| Parametric study of surface morphology for selective laser melting on Ti6Al4V powder bed with numerical and experimental methods |
2 |
| Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts |
2 |
