| Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress |
29 |
| Multiple solutions of Cu-C6H9NaO7 and Ag-C6H9NaO7 nanofluids flow over nonlinear shrinking surface |
22 |
| Industrial wastes applications for alkalinity regulation in bauxite residue: A comprehensive review |
20 |
| Effects of homogeneous-heterogeneous reactions and thermal radiation on magneto-hydrodynamic Cu-water nanofluid flow over an expanding flat plate with non-uniform heat source |
14 |
| A review on application of nanofluid in various types of heat pipes |
14 |
| Potential landfill site selection for solid waste disposal using GIS and multi-criteria decision analysis (MCDA) |
13 |
| Heat transfer and nanofluid flow over a porous plate with radiation and slip boundary conditions |
12 |
| A nanofluid MHD flow with heat and mass transfers over a sheet by nonlinear boundary conditions: Heat and mass transfers enhancement |
11 |
| Magnetohydrodynamic flow and heat transfer impact on ZnO-SAE50 nanolubricant flow over an inclined rotating disk |
10 |
| Superposed disturbance mechanism of sequential overlying strata collapse for gob-side entry retaining and corresponding control strategies |
10 |
| Numerical analysis on forced convection enhancement in an annulus using porous ribs and nanoparticle addition to base fluid |
10 |
| Recovery of iron and rare earth elements from red mud through an acid leaching-stepwise extraction approach |
9 |
| Application of a combined supporting technology with U-shaped steel support and anchor-grouting to surrounding soft rock reinforcement in roadway |
8 |
| Design of wearable hand rehabilitation glove with soft hoop-reinforced pneumatic actuator |
8 |
| Energy and exergy recovery from exhaust hot water using organic Rankine cycle and a retrofitted configuration |
7 |
| Ground stability of underground gateroad with 1 km burial depth: A case study from Xingdong coal mine, China |
7 |
| Experimental investigation on deformation characteristics and permeability evolution of rock under confining pressure unloading conditions |
7 |
| MHD mixed convective stagnation-point flow of Eyring-Powell nanofluid over stretching cylinder with thermal slip conditions |
6 |
| Microwave digestion and alkali fusion assisted hydrothermal synthesis of zeolite from coal fly ash for enhanced adsorption of Cd(II) in aqueous solution |
6 |
| Improving of copper extraction from chalcopyrite by using NaCl |
6 |
| An enhanced artificial bee colony optimizer and its application to multi-level threshold image segmentation |
6 |
| Numerical study of RC beams under various loading rates with LS-DYNA |
6 |
| Prediction of soil-water characteristic curve for Malan loess in Loess Plateau of China |
6 |
| Safe range analysis of clear distance of twin shallow tunnels based on limit analysis and reliability theory |
6 |
| Reliability analysis for seismic stability of tunnel faces in soft rock masses based on a 3D stochastic collapse model |
6 |
| Thermal damage constitutive model for rock considering damage threshold and residual strength |
6 |
| Damage mechanism of soil-rock mixture after freeze-thaw cycles |
6 |
| Path planning for UAVs formation reconfiguration based on Dubins trajectory |
6 |
| Effect of wire mesh interlayer in explosive cladding of dissimilar grade aluminum plates |
6 |
| Adsorption properties of a novel 3D graphene/MgO composite for heavy metal ions |
6 |
| Synthesis and characterization of Na0.44MnO2 nanorods/graphene composite as cathode materials for sodium-ion batteries |
6 |
| Lateral-torsional buckling of box beam with corrugated steel webs |
5 |
| An adaptive backstepping sliding mode method for flight attitude of quadrotor UAVs |
5 |
| An improved joint method for onset picking of acoustic emission signals with noise |
5 |
| Degradation of joint surface morphology, shear behavior and closure characteristics during cyclic loading |
5 |
| A review on spatial self-phase modulation of two-dimensional materials |
5 |
| Thermodynamics, kinetics and mechanism analysis of Cu(II) adsorption by in-situ synthesized struvite crystal |
5 |
| Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation |
5 |
| Bayesian framework for satellite rechargeable lithium battery synthesizing bivariate degradation and lifetime data |
5 |
| Effect of postweld heat treatment on interface microstructure and metallurgical properties of explosively welded bronze-carbon steel |
5 |
| Two-step carbon modification of NaTi2(PO4)(3) with improved sodium storage performance for Na-ion batteries |
5 |
| Chromium detoxification mechanism induced growth and antioxidant responses in vetiver (Chrysopogon zizanioides(L.) Roberty) |
5 |
| Pretreatment of poly (acrylic acid) sodium by continuous diafiltration and time revolution of filtration potential |
5 |
| Heat transfer intensification in hydromagnetic and radiative 3D unsteady flow regimes: A comparative theoretical investigation for aluminum and -aluminum oxides nanoparticles |
5 |
| Noise comparison of centrifugal pump operating in pump and turbine mode |
4 |
| Features of Darcy-Forchheimer flow of carbon nanofluid in frame of chemical species with numerical significance |
4 |
| Flow and natural convection heat transfer characteristics of non-Newtonian nanofluid flow bounded by two infinite vertical flat plates in presence of magnetic field and thermal radiation using Galerkin method |
4 |
| A model of deformation of thin-wall surface parts during milling machining process |
4 |
| Application of time-frequency entropy from wake oscillation to gas-liquid flow pattern identification |
4 |
| A nonlinear rheological damage model of hard rock |
4 |
