| Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication |
10 |
| Influence of tool pin and shoulder geometries on microstructure of friction stir processed AA6063/SiC composites |
10 |
| Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels |
6 |
| Influence of rotating magnetic field on Maxwell saturated ferrofluid flow over a heated stretching sheet with heat generation/absorption |
5 |
| Forming limit diagram prediction of 6061 aluminum by GTN damage model |
4 |
| A systematic review of voxelization method in additive manufacturing |
3 |
| Study on horizontal vibration characteristics of high-speed elevator with airflow pressure disturbance and guiding system excitation |
3 |
| Effects of bushing profiles on the elastohydrodynamic lubrication performance of the journal bearing under steady operating conditions |
3 |
| Mechanical analysis of sealing performance for compression packer rubber tube |
3 |
| Energy, exergy, and economic analysis of a new triple-cycle power generation configuration and selection of the optimal working fluid |
3 |
| Impact of brass contents on thermal, friction and wear properties of brake linings composites |
2 |
| Identification of ductile to brittle transition temperature by using plane strain specimen in tensile test and correlation with instrumented Charpy impact test: experimental and numerical study |
2 |
| Numerical analysis of the effects of compression ring wear and cylinder liner deformation on the thermal mixed lubrication performance of ring-liner system |
2 |
| An implicit algorithm for the dynamic study of nonlinear vibration of spur gear system with backlash |
2 |
| Disturbance rejection control with H-infinity optimized observer for vibration suppression of piezoelectric smart structures |
2 |
| The formation of the cutting tool microgeometry by pulsed laser ablation |
2 |
| The influence of duplex vacuum-plasma treatment on the mechanics of complex-profile cutting tool wearing in the production of aircraft engine parts |
2 |
| Application of roller burnishing technologies to improve the wear resistance of submerged pump parts made of powder alloys |
2 |
| Effect of minimum quantity lubrication strategies on tribological study of simulated machining operation |
2 |
| 1D gas dynamic code for performance prediction of one turbocharger radial turbine with different finite difference schemes |
2 |
| Experimental study and FEM analysis of forward hot dieless spinning |
2 |
| Mesh stiffness modeling considering actual tooth profile geometry for a spur gear pair |
2 |
| Effect of the axial movement of misaligned journal on the performance of hydrodynamic lubrication journal bearing with rough surface |
2 |
| Flow analysis of particulate suspension on an asymmetric peristaltic motion in a curved configuration with heat and mass transfer |
2 |
| Determination of energy absorption in different cellular auxetic structures |
2 |
| Performance investigation of organic Rankine-vapor compression refrigeration integrated system activated by renewable energy |
1 |
| A 2.5D numerical study on open water hydrodynamic performance of a Voith-Schneider propeller |
1 |
| On the residual stress modeling of shot-peened AISI 4340 steel: finite element and response surface methods |
1 |
| Investigation of sheet bending parameters on springback in nickel coated mild steel sheets using response surface methodology |
1 |
| Numerical simulation of heat transfer during leaf spring industrial quenching process |
1 |
| Application of a new integrated optimization approach in sheet hydroforming process |
1 |
| An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code |
1 |
| From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue |
1 |
| Fatigue life prediction of joggle weld joint using virtual strain gauge and its validation through experiments |
1 |
| Investigation on the skidding dynamic response of rolling bearing with local defect under elastohydrodynamic lubrication |
1 |
| Estimation of the resonance amplitude in machines with inertia vibrator in the coast-down phase |
1 |
| Experimental research on cage dynamic characteristics of angular contact ball bearing |
1 |
| Multi-objective robust design optimization of the mechanism in a sewing machine |
1 |
| The capability of three seperable finite-strain viscoelastic models to predict response of a filled rubber material |
1 |
| Microtension control for a yarn winding system with an IMC PID controller |
1 |
| Optimization of turbojet engine cycle with dual-purpose PSO algorithm |
1 |
| Analysis of the multilayer woven fabric behaviour during the forming process: focus on the loss of cohesion within the woven fibre network |
1 |
| Inlet pressure simulation of pigging in uphill gas pipeline |
1 |
| Predicting model of thickness distribution and rolling force in angular rolling process based on influence function method |
1 |
| Rapid design method and new contours for a class of three dimensional supersonic nozzle of arbitrary exit cross section |
1 |
| Streamwise and spanwise vortical structure merging inside the wake of an inclined flat plate |
1 |
| Mixing of two immiscible phases measured by industrial electrical impedance tomography system |
1 |
| Air jet impingement to reduce hot strip wave on a run-out table |
1 |
| Heat transfer convection of a power law fluid flow within a parallel plate channel provided with two generating obstacles |
1 |
| Enhanced formulae for determining the axial behavior of cylindrical extension springs |
1 |
