| Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method |
17 |
| In-vitro performance and fracture strength of thin monolithic zirconia crowns |
6 |
| A comparison of the accuracy of intraoral scanners using an intraoral environment simulator |
6 |
| The effect of sandblasting duration on the bond durability of dual-cure adhesive cement to CAD/CAM resin restoratives |
6 |
| Effects of different surface treatments on the shear bond strength of veneering ceramic materials to zirconia |
5 |
| Evaluation of the repeatability and matching accuracy between two identical intraoral spectrophotometers: and in vivo and in vitro study |
5 |
| In vitro performance and fracture resistance of novel CAD/CAM ceramic molar crowns loaded on implants and human teeth |
5 |
| The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia |
5 |
| Fracture resistance of implant- supported monolithic crowns cemented to zirconia hybrid-abutments: zirconia-based crowns vs. lithium disilicate crowns |
4 |
| In vitro wear behavior between enamel cusp and three aesthetic restorative materials: Zirconia, porcelain, and composite resin |
4 |
| The effect of glazing and aging on the surface properties of CAD/CAM resin blocks |
4 |
| Comparative color and surface parameters of current esthetic restorative CAD/CAM materials |
4 |
| Trueness and precision of scanning abutment impressions and stone models according to dental CAD/CAM evaluation standards |
4 |
| Load response of the natural tooth and dental implant: A comparative biomechanics study |
3 |
| Effects of cementless fixation of implant prosthesis: A finite element study |
3 |
| A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study |
3 |
| Advancements in craniofacial prosthesis fabrication: A narrative review of holistic treatment |
3 |
| Digital evaluation of axial displacement by implant-abutment connection type: An in vitro study |
3 |
| Evaluation of marginal discrepancy of pressable ceramic veneer fabricated using CAD/CAM system: Additive and subtractive manufacturing |
3 |
| The accuracy of a 3D printing surgical guide determined by CBCT and model analysis |
3 |
| Comparative clinical study of the marginal discrepancy of fixed dental prosthesis fabricated by the milling-sintering method using a presintered alloy |
3 |
| In vivo wear determination of novel CAD/CAM ceramic crowns by using 3D alignment |
3 |
| Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations |
3 |
| Color comparison between non-vital and vital teeth |
3 |
| The effects of surface grinding and polishing on the phase transformation and flexural strength of zirconia |
3 |
| Hydroxyapatite-coated implant: Clinical prognosis assessment via a retrospective follow-up study for the average of 3 years |
3 |
| Effects of incorporation of 2.5 and 5 wt% TiO2 nanotubes on fracture toughness, flexural strength, and microhardness of denture base poly methyl methacrylate (PMMA) |
3 |
| Color changes of ceramic veneers following glazing with respect to their composition |
2 |
| Two-body wear behavior of human enamel versus monolithic zirconia, lithium disilicate, ceramometal and composite resin |
2 |
| Effects of different surface finishing protocols for zirconia on surface roughness and bacterial biofilm formation |
2 |
| Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method |
2 |
| Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas |
2 |
| Influence of nano alumina coating on the flexural bond strength between zirconia and resin cement |
2 |
| Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis |
2 |
| Comparison of implant component fractures in external and internal type: A 12-year retrospective study |
2 |
| Effects of abutment diameter, luting agent type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments |
2 |
| The effect of undersizing and tapping on bone to implant contact and implant primary stability: A histomorphometric study on bovine ribs |
2 |
| Evaluation of adjacent tooth displacement in the posterior implant restoration with proximal contact loss by superimposition of digital models |
2 |
| Sealing capability and marginal fit of titanium versus zirconia abutments with different connection designs |
2 |
| Repair bond strength of composite resin to zirconia restorations after different thermal cycles |
2 |
| Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing |
2 |
| Shear bond strength of luting cements to fixed superstructure metal surfaces under various seating forces |
2 |
| Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique |
2 |
| Influence of nonthermal argon plasma on the shear bond strength between zirconia and different adhesives and luting composites after artificial aging |
2 |
| Effect of liners and primers on tensile bond strength between zirconia and resin-based luting agent |
2 |
| Effects of relining materials on the flexural strength of relined thermoplastic denture base resins |
2 |
| A pilot study using machine learning methods about factors influencing prognosis of dental implants |
2 |
| In vitro evaluation of color and translucency reproduction of maxillofacial prostheses using a computerized system |
2 |
| Effect of non-thermal plasma on the shear bond strength of resin cements to Polyetherketoneketone (PEKK) |
2 |
| Influence of implant-abutment connection structure on peri-implant bone level in a second molar: A 1-year randomized controlled trial |
2 |
