| Microstructure and Phase Evolution of Cement-Bonded High-Alumina Refractory Castables for Porous Purging Plugs |
33 |
| Alkali-Activated Materials Based on Callovo-Oxfordian Argillite: Formation, Structure and Mechanical Properties |
7 |
| Structure Features and Properties of Graphene/Al2O3 Composite |
5 |
| Slurry Development for Spray Granulation o f Ceramic Multicomponent Batches |
5 |
| Influence of Reaction-Sintering and Calcination Conditions on Thermoelectric Properties of Sm-doped Calcium Manganate CaMnO3 |
4 |
| Enhanced Mechanical and Electromagnetic-Wave-Absorption Properties of Ceramic Matrix Composites Fabricated by Novel Laser-Machining-Assisted CVI |
4 |
| Insulating Foams and Dense Geopolymers from Biochar By-Products |
4 |
| Current State of Bioceramics |
4 |
| Effect of Particle Size on the Blue Chromate Pigment CoAl2O4 |
3 |
| Effect of Submicron-Carbon-Containing MgO-C Refractories on Carbon Pickup of Ultra-Low Carbon Steel |
3 |
| Sol-Gel Synthesis of Strontium Titanate Nanofibers by Electrospinning |
3 |
| Graphite carbon enclosed AlN nanoparticles with enhanced methanol-tolerant electrocatalytic properties for oxygen reduction |
2 |
| Room-Temperature Mechanochemical Synthesis and Consolidation of Nanocrystalline HfB2-HfO2 Composite Powders |
2 |
| The Corrosion of Mg-Partially Stabilized Zirconia During Service in Continuous Casting Tundish |
2 |
| Mechanical Behaviour of Zirconia-Toughened Alumina Laminates with or without Y-PSZ Intermediate Layers |
2 |
| Influence of the Printing Parameters on the Quality of Alumina Ceramics Shaped by UV-LCM Technology |
2 |
| Effect of interface oxidation on matrix multi-cracking evolution of fiber-reinforced ceramic-matrix composites at elevated temperature |
2 |
| Effects of Aging Time on Microstructure, Hydrophobic and Optical Properties of BiFeO3 Thin Films Synthesized via Sol-Gel Method |
1 |
| Effect of the Evolution of Rheological Behavior over Deagglomeration Time on Optical Transparency of Polycrystalline Alumina Ceramics |
1 |
| Tunable Temperature Range of Stress-Enhanced Electrocaloric Effects in Composition Gradient Bilayers |
1 |
| Influence of Heat Treatment of Amorphous Ti- and B-Containing SiC-Based Fiber in Air on Microstructure and Strength |
1 |
| Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites |
1 |
| Interlaminar Shear Response of Carbon/Carbon in Torsion Tests |
1 |
| Effects of Stabilizer Content and Sintering Conditions on Y-TZP Ceramics made from Stabilizer-Coated Nanopowders |
1 |
| Improving Optical Transmission of Spark-Plasma-Sintered YAG Ceramics: Effect of Powder Conditioning and Post-Treatments |
1 |
| Manufacturing of SiO2-Coated beta-TCP Structures by 3D Printing using a Preceramic Polymer as Printing Binder and Silica Source |
1 |
| Controlled Preparation of Red-Light-Emitting (Y0.95Eu0.05)(2)O-3 Phosphors and Vacuum Sintering of Transparent (Y0.95Eu0.05)(2)O-3 Ceramics |
1 |
| Influence of the Oxygen Flow Rate on Gas Flow Sputtered Thermal Barrier Coatings |
1 |
| Low temperature synthesis of alpha alumina platelets and acicular mullite in MgO-Al2O3-SiO2 system |
1 |
| Integration of Piezoceramic Composites into Structural Components: Effect on the Polarisation State and Polarisability |
0 |
| Microstructure and Properties of Carbon Block Refractories Containing Thermally Oxidized Anthracite for Blast Furnaces |
0 |
| Reinforcement Mechanisms in Yttria-Ceria-Co-Stabilized Zirconia-Alumina-Strontium Hexaaluminate Composite Ceramics |
0 |
| Effects of Growth Rate on Microstructure and Properties of Directionally Solidified Eutectic Ceramic Al2O3/MgAl2O4/ZrO2 |
0 |
| Effects of NH4VO3 on Properties and Structures of Cordierite Ceramics |
0 |
| Impact of Ba2+ on Structure and Electrical Properties of 0.65PMN-0.35PT Ceramics |
0 |
| Co-Precipitation Synthesis of La2O2SO4:Tb3+ Phosphor and its Conversion to La2O2S:Tb3+ Ceramic Scintillator via Pressureless Sintering in Hydrogen |
0 |
| Hot Corrosion Behavior of ZrB2-SiC-Graphite Composite in NaCl and Na2SO4 Molten Salts |
0 |
| Monitoring Damage Accumulation in Continuous Fiber-Reinforced Ceramic-Matrix Composites with Different Fiber Preforms under Cyclic Loading Using Hysteresis-Based Damage Parameters |
0 |
| Microstructure, Growth Kinetics and Formation Mechanism of Oxide Layers on AlN Ceramic Substrates |
0 |
| Surface Modification of Alumina Powder to Prevent Exfoliation of Samples Fabricated by Gelcasting |
0 |
| Preparation of ultra-stable foams stabilized by large-size platelet particles via direct foaming method |
0 |
| Effect of Multiple loading sequence on in-phase thermomechanical fatigue hysteresis of silicon carbide fiber-reinforced ceramic-matrix composites |
0 |
| Enhanced Magneto-Dielectric Properties of 0.6La(0.1)Bi(0.9)FeO(3)-0.4BaTiO(3)/NiFe2O4 Composites Sintered with Powders Prepared with a One-Step Sol-Gel In-Situ Method |
0 |
| Three-Dimensional Network ZnO/BaFe12O19 Composite Thick Films and their Microwave Absorption Properties |
0 |
| Enhanced Electrochemical Performance of Cu-Doped La2NiO4+delta Cathode for Solid Oxide Fuel Cells |
0 |
| High-Temperature Measurements of Macroscopic Deformation Induced by Phase Changes: Application to Bauxite-Based Material |
0 |
| Electrical and Dielectric Properties of Isostatically Pressed Alumina-Based Electroporcelain |
0 |
| Novel Low-Permittivity, Low-Sintering-Temperature Na2WO4 Microwave Dielectric Ceramics for LTCC Applications |
0 |
| Antioxidant Coating Composed of SiC on Carbon Fibers by Chemical Vapor Reaction |
0 |
| Low-Temperature Spark Plasma Sintering of a SiC Nanopowder with a Very Thin Al-Based Layer |
0 |
