| Improvement of hot ductility of C-Mn Steel containing arsenic by rare earth Ce |
11 |
| Research on coherent jet oxygen lance in BOF steelmaking process |
7 |
| Electrolytes and its additives used in aluminum reduction cell: a review |
7 |
| Kinetic study on compositional variations of inclusions, steel and slag during refining process |
6 |
| Measurements of surface velocity and level fluctuation in an actual continuous wide slab casting mold |
5 |
| Effects of electromagnetic stirring on fluid flow and temperature distribution in billet continuous casting mould and solidification structure of 55SiCr |
5 |
| Analysis on the stability of chromium in mineral phases in stainless steel slag |
5 |
| Microhardness evolution of pure titanium deformed by equal channel angular extrusion |
5 |
| Analysis of the off-corner subsurface cracks of continuous casting blooms under the influence of soft reduction and controllable approaches by a chamfer technology |
5 |
| Characterization and boriding kinetics of AISI T1 steel |
4 |
| Comparative study on Ce (III) and La (III) solvent extraction and separation from a nitric acid medium by D2EHPA and Cyanex272 |
4 |
| Stabilization of free CaO in molten BOF slag by addition of silica at high temperature |
4 |
| Application of a chamfer slab technology to reduce internal cracks of continuous casting bloom during soft reduction process |
4 |
| A contribution to laser cladding of Ti-6Al-4V titanium alloy |
4 |
| Experimental and ab initio study of the influence of a compound modifier on carbidic ductile iron |
3 |
| Utilization of low-grade BHQ iron ore by reduction roasting followed by magnetic separation for the production of magnetite-based pellet feed |
3 |
| Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties |
3 |
| Effect of rare earth Ce on the isothermal oxidation behavior in air of arsenic bearing steels |
3 |
| Investigation of the precipitation kinetics and microstructure evolution of martensitic AISI 4140 steel during tempering with high heating rates |
3 |
| Biocatalytic and chemical leaching of a low-grade nickel laterite ore |
3 |
| Recovery of manganese from manganese oxide ores in the EDTA solution |
3 |
| Study of the reduction mechanism of ironsands with addition of blast furnace bag dust |
2 |
| Effect of Mg addition on carbides in H13 steel during electroslag remelting process |
2 |
| Factors influencing melt fluidity of iron ore |
2 |
| Effect of characteristics of fine iron ores on the granulation behavior of concentrate in sintering granulation process |
2 |
| Scrap melting model for steel converter founded on interfacial solid/liquid phenomena |
2 |
| Application of hydrometallurgy techniques in quartz processing and purification: a review |
2 |
| Study of hot cracking potential in a 6-ton steel ingot casting |
2 |
| Effect of reoxidation on inclusions in steel during calcium treatment |
2 |
| Potential of a Nigerian biotite-rich kaolinite ore to industrial alumina by hydrometallurgical process |
2 |
| Leaching of galena by regenerated ferric ion (Fe3+) via electro-oxidation |
2 |
| Short time austenitizing effects on the hardenability of 0.55 wt. pct. Carbon steels |
2 |
| Microwave alkaline roasting-water dissolving process for germanium extraction from zinc oxide dust and its analysis by response surface methodology (RSM) |
2 |
| Microstructural, mechanical and corrosion properties of dissimilar joint between AISI A321 stainless steel and ASTM A537CL1 structural steel produced by GTAW process |
2 |
| Macrosegregation behavior of solute Cu in the solidifying Al-Cu alloys in super-gravity field |
2 |
| Effect of hot rolling on the corrosion behavior of AZ31 magnesium alloy |
2 |
| Performance simulation and optimization of COREX shaft furnace with central gas distribution |
2 |
| Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies |
2 |
| A review on liquid level measurement techniques using mathematical models and field sensors in blast furnace |
2 |
| Co-carbonization of single coking coal and pyrolytic extracts from datong long-flame coal |
2 |
| Product innovations of key economic importance for the steel industry |
2 |
| Thermal conductivity of titanium slags |
2 |
| Effects of Al-Mg alloy treatment on behavior and size of inclusions in SUH 409L stainless steel |
2 |
| Comparative studies on acid leaching of zinc waste materials |
2 |
| Effects of basicity and CaF2 on the viscosity of CaF2-CaO-SiO2 slag for electroslag remelting process |
2 |
| Recovery of germanium from acid leach solutions of zinc refinery residue using an oxime extractant of HBL101 |
2 |
| Effect of hybrid reinforcement at stirred zone of dissimilar aluminium alloys during friction stir welding |
2 |
| Aluminium grain refinement by Ti(C, N) nanoparticles additions: principles, advantages and drawbacks |
2 |
| Preliminary investigations on hydrometallurgical treatment of spent Li-ion batteries |
2 |
| Microstructure and texture evolution of medium temperature grain-oriented silicon steel produced by industrialization |
2 |
