| A Review of Metastable Beta Titanium Alloys |
50 |
| A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs |
22 |
| Laser Powder Bed Fusion of Stainless Steel Grades: A Review |
20 |
| Advanced Metal Matrix Nanocomposites |
19 |
| 3D Printing of Highly Pure Copper |
18 |
| Corrosion, Erosion and Wear Behavior of Complex Concentrated Alloys: A Review |
18 |
| Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion |
16 |
| Case Study to Illustrate the Potential of Conformal Cooling Channels for Hot Stamping Dies Manufactured Using Hybrid Process of Laser Metal Deposition (LMD) and Milling |
16 |
| Laser Powder Bed Fusion of Inconel 718: Residual Stress Analysis Before and After Heat Treatment |
15 |
| Effect of Mechanical Activation on the Kinetics of Copper Leaching from Copper Sulfide (CuS) |
15 |
| The Suitability of Zn-1.3% Fe Alloy as a Biodegradable Implant Material |
15 |
| Microalloyed Steels through History until 2018: Review of Chemical Composition, Processing and Hydrogen Service |
14 |
| Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications |
14 |
| An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment |
14 |
| Mechanical Properties and In Vitro Behavior of Additively Manufactured and Functionally Graded Ti6Al4V Porous Scaffolds |
13 |
| 3D Printed Acetabular Cups for Total Hip Arthroplasty: A Review Article |
13 |
| On Sluggish Diffusion in Fcc Al-Co-Cr-Fe-Ni High-Entropy Alloys: An Experimental and Numerical Study |
13 |
| Predictive Simulation of Plastic Processing of Welded Stainless Steel Pipes |
13 |
| Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry |
13 |
| A Short Review on Fracture Mechanisms of Mechanical Components Operated under Industrial Process Conditions: Fractographic Analysis and Selected Prevention Strategies |
12 |
| The Potential of Magnesium Based Materials in Mandibular Reconstruction |
12 |
| Activation Volume and Energy for Dislocation Nucleation in Multi-Principal Element Alloys |
12 |
| Advances and Challenges of Biodegradable Implant Materials with a Focus on Magnesium-Alloys and Bacterial Infections |
12 |
| Recovery of Valuable Metals from Lithium-Ion Batteries NMC Cathode Waste Materials by Hydrometallurgical Methods |
12 |
| Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting |
12 |
| Review of the Soft Sparking Issues in Plasma Electrolytic Oxidation |
12 |
| An Overview of Key Challenges in the Fabrication of Metal Matrix Nanocomposites Reinforced by Graphene Nanoplatelets |
12 |
| Forming Process, Microstructure, and Mechanical Properties of Thin-Walled 316L Stainless Steel Using Speed-Cold-Welding Additive Manufacturing |
11 |
| Chemical Dealloying Synthesis of CuS Nanowire-on-Nanoplate Network as Anode Materials for Li-Ion Batteries |
11 |
| Microstructure and Mechanical Properties of TiC-Reinforced 316L Stainless Steel Composites Fabricated Using Selective Laser Melting |
11 |
| Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel |
11 |
| High Performance Fine-Grained Biodegradable Mg-Zn-Ca Alloys Processed by Severe Plastic Deformation |
11 |
| Crystallographic Features of Microstructure in Maraging Steel Fabricated by Selective Laser Melting |
11 |
| Wear and Cavitation Erosion Resistance of an AlMgSc Alloy Produced by DMLS |
10 |
| Hot Deformation Behavior and Constitutive Modeling of H13-Mod Steel |
10 |
| Leaching and Recovery of Rare-Earth Elements from Neodymium Magnet Waste Using Organic Acids |
10 |
| Role of Chemical Composition in Corrosion of Aluminum Alloys |
10 |
| Recent Advances in Thermoelectric Performance of Half-Heusler Compounds |
10 |
| A Review of the Diamond Retention Capacity of Metal Bond Matrices |
10 |
| Global and High-Resolution Damage Quantification in Dual-Phase Steel Bending Samples with Varying Stress States |
10 |
| Techno-Economic Analysis of High-Pressure Metal Hydride Compression Systems |
10 |
| A Comprehensive Study of Steel Powders (316L, H P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing |
10 |
| Metallic Glasses: A New Approach to the Understanding of the Defect Structure and Physical Properties |
10 |
| Evolution of Microstructure and Mechanical Properties of a CoCrFeMnNi High-Entropy Alloy during High-Pressure Torsion at Room and Cryogenic Temperatures |
10 |
| In Vitro Corrosion Assessment of Additively Manufactured Porous NiTi Structures for Bone Fixation Applications |
10 |
| Wire and Arc Additive Manufacturing of Aluminum Components |
9 |
| Corrosion and Tensile Behaviors of Ti-4Al-2V-1Mo-1Fe and Ti-6Al-4V Titanium Alloys |
9 |
| Gold Bioleaching from Printed Circuit Boards of Mobile Phones by Aspergillus niger in a Culture without Agitation and with Glucose as a Carbon Source |
9 |
| Development of an Analytical Model for the Extraction of Manganese from Marine Nodules |
9 |
| Advanced Non-Destructive in Situ Characterization of Metals with the French Collaborating Research Group D2AM/BM02 Beamline at the European Synchrotron Radiation Facility |
9 |
