| Study on corrosion and anticorrosion of rebar in magnesium oxychloride cement concrete |
10 |
| Composite hydrate salt Na2HPO4 center dot 12H(2)O-Na2SO4 center dot 10H(2)O and its thermal storage properties |
6 |
| In situ synthesis of green AgNPs on ramie fabric with functional and catalytic properties |
5 |
| Structure, spectra and bioactivity of pentyl ester of chlorogenic acid: DFT study |
5 |
| Role of RF power in growth and characterization of RF magnetron sputtering GaN/glass thin film |
4 |
| Emerging magnesium-based biomaterials for orthopedic implantation |
4 |
| Thermal and mechanical coupling effects on permeability of weakly cemented sandstone |
4 |
| Mechanical properties of chemically treated woven banana/polyvinyl alcohol composites |
4 |
| Wear and frictional behaviour of composites filled with agro-based waste materials |
3 |
| Characterization and optimization of low-energy broad-beam ion source |
3 |
| Tunable CdS/TiO2 all-optical switches with defect layers |
3 |
| Electrochemical characteristic analysis of corrosion of coated steel bars in magnesium oxychloride concrete |
2 |
| Dynamic shear rheology of nanocomposite propellant suspension |
2 |
| Mechanical and microstructural properties of metakaolin geopolymer |
2 |
| Green synthesis of glycerol monostearate-modified cationic waterborne polyurethane |
2 |
| Deep insight into electron transport and photovoltaic parameters in DSSCs |
2 |
| Influence of surface quality on the pitting corrosion behavior of an aluminum alloy |
2 |
| Improvement in the water resistance of MAPC coatings as a function of NaCl concentration |
2 |
| Reliability analysis of freeze-thaw damage of fiber concrete based on Miner theory |
2 |
| Thermal behavior and light transmittance of PLLA nucleated using strontium phenylmalonate |
2 |
| Rice-husk-based superplasticizer to increase performance of fly ash geopolymer concrete |
2 |
| Application of TTSP to non-linear deformation in composite propellant |
2 |
| Arcing failure analysis of miniature circuit breaker using nano-W-Cu material |
2 |
| Dynamic splitting tensile test of hybrid-fiber-reinforced reactive powder concrete |
2 |
| Advanced machining of TiNiCo shape memory alloys for biomedical applications |
2 |
| A novel approach to achieving a low Young's modulus in titanium-based metallic glasses |
2 |
| Rapid surface roughness testing method and instrument |
1 |
| Thermal behavior of silica aerogel/PMMA composite reinforced by non-covalent interaction |
1 |
| Preparation of two novel Schiff base polymers and their Eu (III)/Yb (III) complexes |
1 |
| Modeling on magnetoelectric effect of functional piezoelectric dielectric |
1 |
| A CFD simulation of CLSM filling with piping on Herschel-Bulkley rheological model |
1 |
| Luminescence and energy-transfer mechanism of a praseodymium material |
1 |
| Equal-channel angular extrusion of AI 5083 alloy with copper shielding |
1 |
| Characterization of Nd(Tb)-Fe-B-based exchange-spring nanocomposite magnets |
1 |
| Inhibition effect and mechanism of mesoporous silica hollow nanospheres on asphalt VOCs |
1 |
| Photocatalytic activity of hierarchical Ti-Zr-ZSM-5 catalysts from attapulgite by MRS |
1 |
| Influence of environment on response characteristics of a high-strength aluminum alloy |
1 |
| Influence of dielectric flushing conditions during WEDM of TiNiCu shape memory alloys |
1 |
| The effect of fiber size on tensile characteristics of natural-fiber-reinforced composites |
1 |
| Investigation of SCC characterizations incorporating supplementary cementitious materials |
1 |
| Determination of flow stress of magnesium alloy sheet AZ31B by reverse analysis method |
1 |
| Conductivity modification of gum acacia-based gel electrolytes |
1 |
| Detection of thermal response of geomaterials: a critical appraisal |
1 |
| Effect of nano-SiO2 from rice hull ash on the conductivity of cement paste |
1 |
| Process parameter optimization for FSW of AA6061/SiC/fly ash AMCs using Taguchi technique |
1 |
| Production and properties of Co-based metallic-glass-reinforced aluminum matrix composites |
1 |
| Review of preparation and application of copper-steel bimetal composites |
1 |
| Laser-melted surfaces fabricated on MAO films in Al and Si electrolytes |
1 |
| Influence of prestress on the natural frequency of a fluid-filled FGM sphere |
1 |
| Machining effects on delamination failure in milling MD-CFRPs with uncoated carbide tools |
1 |
