| A high entropy silicide by reactive spark plasma sintering |
37 |
| High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials |
26 |
| Recent progress in Ti-based nanocomposite anodes for lithium ion batteries |
22 |
| Recent development of A(2)B(2)O(7) system transparent ceramics |
20 |
| Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior |
19 |
| Preparation and anisotropic properties of textured structural ceramics: A review |
17 |
| Epitaxial growth and cracking of highly tough 7YSZ splats by thermal spray technology |
17 |
| Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration |
16 |
| Carbon dioxide adsorption of two-dimensional carbide MXenes |
16 |
| Microwave dielectric properties of Ca0.7Nd0.2TiO3 ceramic-filled CaO-B2O3-SiO2 glass for LTCC applications |
14 |
| Organosilicon polymer-derived ceramics: An overview |
14 |
| Effect of calcination temperature on structural and optical properties of MAl2O4 (M = Ni, Cu, Zn) aluminate spinel nanoparticles |
12 |
| Preparation of transparent nanostructured N-doped TiO2 thin films by combination of sonochemical and CVD methods with visible light photocatalytic activity |
12 |
| Phase evolution, microstructure, electric properties of (Ba1-xBi0.67xNa0.33x)(Ti1-xBi0.33xSn0.67x)O-3 ceramics |
12 |
| Synthesis, characterization and dielectric properties of a novel temperature stable (1-x)CoTiNb2O8-xZnNb(2)O(6) ceramic |
12 |
| Optimal design on the high-temperature mechanical properties of porous alumina ceramics based on fractal dimension analysis |
12 |
| Densification behavior of yttria-stabilized zirconia powders for solid oxide fuel cell electrolytes |
11 |
| Phase microstructure evaluation and microwave dielectric properties of (1-x)Mg0.95Ni0.05Ti0.98Zr0.02O3-xCa(0.6)La(0.8/3)TiO(3) ceramics |
11 |
| Synthesis of low-cost porous ceramic microspheres from waste gangue for dye adsorption |
10 |
| Microstructural evolution and performance of carbon fiber-toughened ZrB2 ceramics with SiC or ZrSi2 additive |
10 |
| Flexoelectric materials and their related applications: A focused review |
9 |
| Influence of rare earth ion substitutions on the structural, optical, transport, dielectric, and magnetic properties of superparamagnetic iron oxide nanoparticles |
8 |
| Electromechanical properties of Ce-doped (Ba0.85Ca0.15)(Zr0.1Ti0.9)O-3 lead-free piezoceramics |
8 |
| Ultrafast synthesis and sintering of materials in a single running experiment approach by using electric fields |
8 |
| Self-propagating high-temperature synthesis of ZrO2 incorporated Gd2Ti2O7 pyrochlore |
8 |
| Effect of multi-walled carbon nanotube addition on the microstructures and mechanical properties of Ti(C,N)-based cermets |
8 |
| Preparation and characterization of monodispersed spherical Fe2O3@SiO2 reddish pigments with core-shell structure |
8 |
| Porous SiC/melamine-derived carbon foam frameworks with excellent electromagnetic wave absorbing capacity |
8 |
| Preparation of high-efficiency ceramic planar membrane and its application for water desalination |
8 |
| Relaxor behaviour and phase transition of perovskite ferroelectrics-type complex oxides (1-x)Na0.5Bi0.5TiO3-xCaTiO(3) system |
7 |
| YAGG:Ce transparent ceramics with high luminous efficiency for solid-state lighting application |
7 |
| Co2+ substituted Mg-Cu-Zn ferrite: Evaluation of structural, magnetic, and electromagnetic properties |
7 |
| Electrospun polyporous VN nanofibers for symmetric all-solid-state supercapacitors |
7 |
| ZrC-ZrB2-SiC ceramic nanocomposites derived from a novel single-source precursor with high ceramic yield |
7 |
| Mechanical properties and thermal stability of carbon fiber cloth reinforced sol-derived mullite composites |
7 |
| Preparation and arc erosion properties of Ag/Ti2SnC composites under electric arc discharging |
7 |
| Isotropic freeze casting of through-porous hydroxyapatite ceramics |
7 |
| 3D C-f/SiBCN composites prepared by an improved polymer infiltration and pyrolysis |
6 |
| A new methodology to obtain the fracture toughness of YAG transparent ceramics |
6 |
| Effect of the sintering technique on the ferroelectric and d(33) piezoelectric coefficients of Bi-0.5(Na0.84K0.16)(0.5)TiO3 ceramic |
6 |
| Determination of the load-independent hardness by analyzing the nanoindentation loading curves: A case study on fused silica |
6 |
| Fabrication and microstructure of ZrB2-ZrC-SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy |
6 |
| Crystalline boron nitride nanosheets by sonication-assisted hydrothermal exfoliation |
6 |
| Influence of test procedure on dielectric breakdown strength of alumina |
5 |
| Sinterability of nanopowders of terbia solid solutions with scandia, yttria, and lutetia |
5 |
| Investigation of magnetoelectric effect in lead free K0.5Na0.5NbO3-BaFe12O19 novel composite system |
5 |
| Influence of processing on microstructure and electrical characteristics of multilayer varistors |
5 |
| Slip casting and pressureless sintering of Ti3AlC2 |
5 |
| N-doped graphene and TiO2 supported manganese and cerium oxides on low-temperature selective catalytic reduction of NOx with NH3 |
5 |
| Enhanced mechanical properties and thermal shock resistance of Si2BC3N ceramics with SiC coated MWCNTs |
5 |
