| Lithium Recovery from Aqueous Resources and Batteries: A Brief Review A review of the methods to produce lithium and approaches to recycling from end-of-life lithium-ion batteries |
17 |
| Toward Platinum Group Metal-Free Catalysts for Hydrogen/AirProton-Exchange Membrane Fuel Cells |
12 |
| Challenges and Opportunities in Fast Pyrolysis of Biomass: Part I Introduction to the technology, feedstocks and science behind a promising source of fuels and chemicals |
11 |
| The Role of Noble Metal Catalysts in Conversion of Biomass and Bio-derived Intermediates to Fuels and Chemicals A review of promising approaches on plant based biomass as a renewable alternative feedstock |
10 |
| Recent Advances in Controlled and Modified Atmosphere of Fresh Produce Postharvest technologies to reduce food waste and maintain fresh produce quality |
10 |
| Ammonia and the Fertiliser Industry: The Development of Ammonia at Billingham A history of technological innovation from the early 20th century to the present day |
7 |
| Rechargeable Multi-Valent Metal-Air Batteries A review of research and current challenges in secondary multivalent metal-oxygen batteries |
5 |
| All-Solid-State Batteries and their Remaining Challenges A potential route towards safer, higher performing batteries |
5 |
| In Situ and Operando Spectroscopy: A Powerful Approach Towards Understanding Catalysts |
5 |
| Accessibility and Location of Acid Sites in Zeolites as Probed by Fourier Transform Infrared Spectroscopy and Magic Angle Spinning Nuclear Magnetic Resonance |
4 |
| Hydrometallurgical Treatment of an Eudialyte Concentrate for Preparation of Rare Earth Carbonate |
4 |
| Intensified Liquid-Liquid Extraction Technologies in Small Channels: A Review |
4 |
| Size Dependent Elastic and Thermophysical Properties of Zinc Oxide Nanowires Semiconductor materials characterisation for high temperature applications |
3 |
| Progress in Active Ingredient Formulations Towards smart stimuli-responsive formulations |
3 |
| Metal Powder Atomisation Methods for Modern Manufacturing Advantages, limitations and new applications for high value powder manufacturing techniques |
3 |
| Current Status of Platinum Based Nanoparticles: Physicochemical Properties and Selected Applications - A Review |
3 |
| Continuous Chlorine Detection in Drinking Water and a Review of New Detection Methods |
3 |
| Challenges and Opportunities in Fast Pyrolysis of Biomass: Part II Upgrading options and promising applications in energy, biofuels and chemicals |
3 |
| A Facile Green Tea Assisted Synthesis of Palladium Nanoparticles Using Recovered Palladium from Spent Palladium Impregnated Carbon Biosynthesising palladium nanoparticles using green tea as a reducing agent |
3 |
| Recent ( Developments in the Structural ) Characterisation of Disordered, Mesoporous Solids |
3 |
| Dynamic Nuclear Polarisation Enhanced Solid-State Nuclear Magnetic Resonance Studies of Surface Modification of y-Alumina |
2 |
| Cycling Non-Aqueous Lithium-Air Batteries with ( Dimethyl Sulfoxide and Sulfolane ) Co-Solvent |
2 |
| Oxidative Degradation of Phenol using in situ Generated Hydrogen Peroxide Combined with Fenton's Process Supported palladium-iron catalysts for the removal of model contaminants from wastewater |
2 |
| STEPWISE Project: Sorption-Enhanced Water-Gas Shift Technology to Reduce Carbon Footprint in the Iron and Steel Industry An introduction to the project, its aims and its technology |
2 |
| A Review of Measurement Techniques of Mechanical Properties of the Catalyst Layer in Catalytic Converters |
1 |
| 10th International Symposium on Continuous Flow Reactor Technology for Industrial Applications Continuous being implemented for pharmaceutical manufacturing with advantages in EHS, quality and cost |
1 |
| Exploring Microemulsion-Prepared Lanthanum Catalysts for Natural Gas Valorisation Catalysts for small scale application in natural gas and biomass conversion |
1 |
| Coordination Compounds of Hexamethylenetetramine with Metal Salts: A Review Properties and applications of a versatile model ligand |
1 |
| Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors |
1 |
| Effect of Temperature and Catholyte Concentration on the Performance of a Chemically Regenerative Fuel Cell POM-based catholytes for platinum-free polymer electrolyte fuel cells |
1 |
| Stress Whitening in Polyester Melamine Coatings |
0 |
| Historical Review of the Swiss Precious Metals Control Act Focused on Platinoids |
0 |
| Making the Most of Precious Metal Nanoparticles in the Purification of Industrial Wastewater by Catalytic Wet Air Oxidation Revealing synergy between platinum and catalyst support |
0 |
| Application of Atomic Force Microscopy in Formulation Engineering A versatile tool for surface analysis |
0 |
| 9th International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2017) Novel techniques to prepare materials for pharmaceutical, medical and other applications |
0 |
| Sustainable Water Treatment: Innovative Technologies |
0 |
| Using Catalytic Heat Recovery to Improve Efficiency of Gasoline Spark Ignition Engines Chemical efficiency calculations predict fuel economy improvements up to 14% |
0 |
| 9th Carbon Dioxide Utilisation Summit 2017 Latest advances in routes to renewable fuels and chemicals, reducing global greenhouse gas emissions |
0 |
| 5th International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT V) The latest developments in computer simulation of vehicle emissions control catalysts and systems |
0 |
| Optimisation of a Jewellery Platinum Alloy for Precision Casting: Evaluation of Mechanical, Microstructural and Optical Properties |
0 |
| Mechanical Properties of Platinum Jewellery Casting Alloys |
0 |
| Designing Parameters of Surfactant-Free Electrochemical Sensors for Dopamine and Uric Acid on Nitrogen Doped Graphene Films |
0 |
| Inter-Diffusion of Iridium, Platinum, Palladium and Rhodium with Germanium Improved materials for the next generation of electronic devices |
0 |
| The International Flow Battery Forum 2017 A wide range of topics were covered from academic studies to challenges faced in industry |
0 |
| Key Technical Contents of the China VI Emission Standards for Diesel Fuelled Heavy-Duty Vehicles New stringent emissions legislation aims to 'win the blue sky defence war' in China |
0 |
| Grain Reconstruction of Palladium and Palladium-Nickel Alloys for Platinum Catchment Effects on metal alloy composition at surface and in bulk when operated as a platinum catchment unit during high temperature ammonia oxidation |
0 |
| A Re-assessment of the Thermodynamic Properties of Palladium |
0 |
| Continuous Production of Squalane Using 3D Printed Catalytic Supports Additive manufacturing confers advantages for catalyst support design |
0 |
| Developing Unique Geometries of Phosphate-Based Glasses and their Prospective Biomedical Applications Novel fully resorbable materials with unique properties |
0 |
| Predicting the Structure of Grain Boundaries in Fluorite-Structured Materials Understanding the impact of defects in crystalline materials |
0 |
