| Microstructure evolution and dielectric properties of Ce-doped SrBi4Ti4O15 ceramics synthesized via glycine-nitrate process |
81 |
| Mechanical properties and band structure of CdSe and CdTe nanostructures at high pressure - A first-principles study |
6 |
| Structure, dielectric and electrical properties of relaxor lead-free double perovskite: Nd2NiMnO6 |
6 |
| Role of sintering temperature dependent crystallization of bioactive glasses on erythrocyte and cytocompatibility |
6 |
| Structural, morphological, magnetic and electrical properties of Ni doped ZnO nanoparticles synthesized by co-precipitation method |
5 |
| Dielectric, ferroelectric and magnetic properties of Bi0.78La0.08SM0.14Fe0.85Ti0.15O3 ceramics prepared at different sintering conditions |
5 |
| Optical properties of annealed As30Te67Ga3 thin films grown by thermal evaporation |
4 |
| A comparative study on the dielectric and multiferroic properties of Co0.5Zn0.5Fe2O4/Ba0.8Sr0.2TiO3 composite ceramics |
3 |
| Bioactive glass 58S prepared using an innovation sol-gel process |
3 |
| Effects of Mg2+ addition on structure and electrical properties of gadolinium doped ceria electrolyte ceramics |
3 |
| Solvent-deficient synthesis of nanocrystalline Ba0.5Sr0.5Co0.8Fe0.2O3-delta powder |
3 |
| Fabrication, dielectric and electrical characteristics of 0.94 (Bi0.5Na0.5)TiO3-0.06 BaTiO3 ceramics |
2 |
| Effect of graphene orientation on microstructure and mechanical properties of silicon nitride ceramics |
2 |
| Structural, electric and dielectric properties of Eu-doped SrBi2Nb2O9 ceramics obtained by co-precipitation route |
2 |
| Production of brown inorganic pigments with spinel structure using spent zinc-carbon batteries |
2 |
| Influence of molar ratio on dielectric, ferroelectric and magnetic properties of Co0.5Mg0.5Fe2O4/Ba0.85Sr0.15TiO3 composite ceramics |
2 |
| 3D printing of kaolinite clay with small additions of lime, fly ash and talc ceramic powders |
2 |
| The influence of short thermal treatment on structure, morphology and optical properties of Er and Pr doped ceria pigments: Comparative study |
2 |
| Dilatrometric sintering study and characterization of alumina-nickel composites |
2 |
| The luminescence properties of yttria based phosphors and study of YBO3 formation via H3BO3 addition |
2 |
| Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties |
2 |
| Electrochemical performance of sol-gel derived La(0.6)Sr(0.4)CoO(3-delta )cathode material for proton-conducting fuel cell: A comparison between simple and advanced cell fabrication techniques |
1 |
| The influence of the partially europium substitution on the AC electrical properties of BiSr2CaCu2O6.5 ceramics |
1 |
| Facile molten salt synthesis of zirconia whiskers |
1 |
| Magnetic and electrical properties of Cr substituted Ni nano ferrites |
1 |
| Effects of sintering temperature and holding time on the microstructure and electric properties of Ba(Zr0.3Ti0.7)O-3 ceramics |
1 |
| Examination of milled h-BN addition on sintered Si3N3/h-BN ceramic composites |
1 |
| Influence of Co ion doping on the microstructure, magnetic and dielectric properties of Ni1-xCoxFe2O4 ceramics |
1 |
| Influence of low-temperature reaction time on morphology and phase composition of short calcium phosphate whiskers |
1 |
| Investigation of the interactions between titanium and calcium zirconium oxide (CaZrO3) ceramics modified with alumina |
1 |
| Preparation, characterization and formation mechanism of single-crystal zirconia micro-sheets |
1 |
| Effect of microsilica content on microstructure and properties of foamed ceramics with needle-like mullite |
1 |
| Evidence of ferroelectric behaviour in CaCu3Ti4O12 thin films deposited by RF-sputtering |
1 |
| Fabrication and characterization of nanoporous anodic alumina membrane using commercial pure aluminium to remove Coliform bacteria from wastewater |
1 |
| Investigations of fine-paste ware production and exchange in maritime Southeast Asia by electron microscopy and synchrotron X-ray absorption |
1 |
| Comparison between dielectric and pyroelectric properties of PZFNT and BST type ceramics |
1 |
| Shungite - a carbon-mineral rock material: Its sinterability and possible applications |
1 |
| Processing and mechanical characterization of Al2O3/Ni and Al2O3/Co composites by pressureless sintering of nanocomposite powders |
1 |
| Impact of B2O3 and La2O3 addition on structural, mechanical and biological properties of hydroxyapatite |
1 |
| Highly porous hydroxyapatite derived from cuttlefish bone as TiO2 catalyst support |
1 |
| Electrical properties of calcium doped BiFeO3 films on LaNiO3 coated Pt substrates |
1 |
| Studies of dielectric and electrical transport characteristics of BaTiO3BiFeO3-CaSnO3 ternary system |
1 |
| Influence of calcium doping on microstructure, dielectric and electric properties of BaBi2Nb2O9 ceramics |
1 |
| Enhancement of proton conductivity through Yb and Zn doping in BaCe0.5Zr0.35Y0.15O3-delta electrolyte for IT-SOFCs |
1 |
| Preparation of carbonate apatite scaffolds using different carbonate solution and soaking time |
1 |
| Examination of novel electrosprayed biogenic hydroxyapatite coatings on Si3N4 and Si3N4/MWCNT ceramic composite |
1 |
| Structure and electrical properties of (Bi,Na)(0.)94Ba0.06Ti1-x (Mg1/3Nb2/3)(x)O-3 ceramics |
0 |
| Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells |
0 |
| From freeze-dried precursors to microwave sintered Al2O3-ZrO2 composites |
0 |
| Development of bioactive and biocompatible ceramic composites based on potassium polytitanate |
0 |
