| A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells |
454 |
| Performance and cost of materials for lithium-based rechargeable automotive batteries |
365 |
| Pathways for practical high-energy long-cycling lithium metal batteries |
349 |
| Batteries and fuel cells for emerging electric vehicle markets |
321 |
| Atomically dispersed Ni(i) as the active site for electrochemical CO2 reduction |
281 |
| Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries |
246 |
| Solar-driven interfacial evaporation |
207 |
| High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes |
202 |
| Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries |
177 |
| Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors |
175 |
| Challenges and opportunities towards fast-charging battery materials |
171 |
| Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells |
158 |
| Tailored interfaces of unencapsulated perovskite solar cells for > 000 hour operational stability |
157 |
| High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors |
154 |
| Chemical and structural origin of lattice oxygen oxidation in Co-Zn oxyhydroxide oxygen evolution electrocatalysts |
148 |
| Advances and challenges in understanding the electrocatalytic conversion of carbon dioxide to fuels |
144 |
| Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells |
143 |
| Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(II) oxidation in precursor ink |
141 |
| Advances and issues in developing salt-concentrated battery electrolytes |
135 |
| Robust and conductive two-dimensional metal-organic frameworks with exceptionally high volumetric and areal capacitance |
132 |
| Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors |
130 |
| Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules |
128 |
| Stable cycling of high-voltage lithium metal batteries in ether electrolytes |
122 |
| Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release |
121 |
| Building aqueous K-ion batteries for energy storage |
121 |
| High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed subcells with 15% efficiency |
120 |
| Fire-extinguishing organic electrolytes for safe batteries |
117 |
| Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries |
113 |
| Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells |
113 |
| Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries |
111 |
| Efficient two-terminal all-perovskite tandem solar cells enabled by high-quality low-bandgap absorber layers |
107 |
| Lattice-strained metal-organic-framework arrays for bifunctional oxygen electrocatalysis |
107 |
| Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries |
105 |
| Atomically dispersed platinum supported on curved carbon supports for efficient electrocatalytic hydrogen evolution |
102 |
| Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment |
101 |
| Data-driven prediction of battery cycle life before capacity degradation |
99 |
| Economics of converting renewable power to hydrogen |
93 |
| Fast ion transport at solid-solid interfaces in hybrid battery anodes |
92 |
| A low energy demand scenario for meeting the 1.5 degrees C target and sustainable development goals without negative emission technologies |
91 |
| High-energy lithium metal pouch cells with limited anode swelling and long stable cycles |
90 |
| Enhancing long-term photostability of BiVO4 photoanodes for solar water splitting by tuning electrolyte composition |
90 |
| Mapping synergies and trade-offs between energy and the Sustainable Development Goals |
90 |
| Current understanding and challenges of solar-driven hydrogen generation using polymeric photocatalysts |
89 |
| Current status and challenges for automotive battery production technologies |
89 |
| In situ Raman spectroscopic evidence for oxygen reduction reaction intermediates at platinum single-crystal surfaces |
88 |
| Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air |
86 |
| Intercalation-conversion hybrid cathodes enabling Li-S full-cell architectures with jointly superior gravimetric and volumetric energy densities |
84 |
| Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte |
84 |
| Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li-S batteries |
84 |
| Selective visible-light-driven photocatalytic CO2 reduction to CH4 mediated by atomically thin CuIn5S8 layers |
83 |
| Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V |
83 |
| Langmuir-Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries |
82 |
| Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping |
82 |
| Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells |
81 |
| Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications |
80 |
| Multicomponent electrocatalyst with ultralow Pt loading and high hydrogen evolution activity |
80 |
| Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics |
79 |
| Monolithic solid-electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization |
79 |
| Influences from solvents on charge storage in titanium carbide MXenes |
78 |
| Planar p-n homojunction perovskite solar cells with efficiency exceeding 21.3% |
78 |
| Stress-driven lithium dendrite growth mechanism and dendrite mitigation by electroplating on soft substrates |
76 |
| Using peer-to-peer energy-trading platforms to incentivize prosumers to form federated power plants |
73 |
| Characterization and performance evaluation of lithium-ion battery separators |
67 |
| Stable metal battery anodes enabled by polyethylenimine sponge hosts by way of electrokinetic effects |
65 |
| All-in-one visible-light-driven water splitting by combining nanoparticulate and molecular co-catalysts on CdS nanorods |
61 |
| Continuous production of pure liquid fuel solutions via electrocatalytic CO2 reduction using solid-electrolyte devices |
59 |
| Improving cyclability of Li metal batteries at elevated temperatures and its origin revealed by cryo-electron microscopy |
59 |
| A biomimetic high-capacity phenazine-based anolyte for aqueous organic redox flow batteries |
58 |
| Co-electrolysis of CO2 and glycerol as a pathway to carbon chemicals with improved technoeconomics due to low electricity consumption |
57 |
| Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production |
55 |
| Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes |
54 |
| Multi-site electrocatalysts for hydrogen evolution in neutral media by destabilization of water molecules |
54 |
| Direct magnetic enhancement of electrocatalytic water oxidation in alkaline media |
52 |
| Bias-free photoelectrochemical water splitting with photosystem II on a dye-sensitized photoanode wired to hydrogenase |
51 |
| Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging |
51 |
| III-V-on-silicon solar cells reaching 33% photoconversion efficiency in two-terminal configuration |
50 |
| Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells |
50 |
| All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents |
49 |
| Rechargeable aluminium organic batteries |
48 |
| Passivating contacts for crystalline silicon solar cells |
47 |
| High irradiance performance of metal halide perovskites for concentrator photovoltaics |
46 |
| The next phase of the energy transition and its implications for research and policy |
46 |
| Combined economic and technological evaluation of battery energy storage for grid applications |
46 |
| Improved water electrolysis using magnetic heating of FeC-Ni core-shell nanoparticles |
45 |
| Charge separation via asymmetric illumination in photocatalytic Cu2O particles |
45 |
| 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks |
44 |
| High areal capacity battery electrodes enabled by segregated nanotube networks |
44 |
| Diffusion-free Grotthuss topochemistry for high-rate and long-life proton batteries |
43 |
| Visible-light-driven coproduction of diesel precursors and hydrogen from lignocellulose-derived methylfurans |
43 |
| Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions |
43 |
| Design of low bandgap tin-lead halide perovskite solar cells to achieve thermal, atmospheric and operational stability |
43 |
| An intermediate temperature garnet-type solid electrolyte-based molten lithium battery for grid energy storage |
42 |
| Energy investment needs for fulfilling the Paris Agreement and achieving the Sustainable Development Goals |
41 |
| Deep eutectic solvents for cathode recycling of Li-ion batteries |
40 |
| Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation |
39 |
| Impact of uncoordinated plug-in electric vehicle charging on residential power demand |
39 |
| A robust fuel cell operated on nearly dry methane at 500 degrees C enabled by synergistic thermal catalysis and electrocatalysis |
38 |
| A robust large-pore zirconium carboxylate metal-organic framework for energy-efficient water-sorption-driven refrigeration |
37 |
| A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films |
37 |
| Estimation of global final-stage energy-return-on-investment for fossil fuels with comparison to renewable energy sources |
36 |
| A manganese-hydrogen battery with potential for grid-scale energy storage |
36 |
| City-level analysis of subsidy-free solar photovoltaic electricity price, profits and grid parity in China |
36 |
| A 5 x 5 cm(2) protonic ceramic fuel cell with a power density of 1.3 W cm(-2) at 600 degrees C |
36 |
| Production of ammonia via a chemical looping process based on metal imides as nitrogen carriers |
36 |
| Quantifying the rural residential energy transition in China from 1992 to 2012 through a representative national survey |
35 |
| Enabling reliability assessments of pre-commercial perovskite photovoltaics with lessons learned from industrial standards |
34 |
| Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells |
33 |
| Decoupled hydrogen and oxygen evolution by a two-step electrochemical-chemical cycle for efficient overall water splitting |
33 |
| Substantial emission reductions from Chinese power plants after the introduction of ultra-low emissions standards |
33 |
| A dynamic analysis of financing conditions for renewable energy technologies |
31 |
| Safety modelling and testing of lithium-ion batteries in electrified vehicles |
30 |
| A thermally synergistic photo-electrochemical hydrogen generator operating under concentrated solar irradiation |
30 |
| Natural gas upgrading using a fluorinated MOF with tuned H2S and CO2 adsorption selectivity |
29 |
| Potential-sensing electrochemical atomic force microscopy for in operando analysis of water-splitting catalysts and interfaces |
29 |
| Facet-dependent active sites of a single Cu2O particle photocatalyst for CO2 reduction to methanol |
29 |
| Binary molecular-semiconductor p-n junctions for photoelectrocatalytic CO2 reduction |
28 |
| Manganese oxidation as the origin of the anomalous capacity of Mn-containing Li-excess cathode materials |
28 |
| Non-Gaussian power grid frequency fluctuations characterized by Levy-stable laws and superstatistics |
28 |
| Spatial decoupling of light absorption and catalytic activity of Ni-Mo-loaded high-aspect-ratio silicon microwire photocathodes |
26 |
| Costs and consequences of wind turbine wake effects arising from uncoordinated wind energy development |
26 |
| Ultrafast narrowband exciton routing within layered perovskite nanoplatelets enables low-loss luminescent solar concentrators |
26 |
| Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells |
26 |
| Technological, economic and environmental prospects of all-electric aircraft |
25 |
| Barriers and opportunities in bio-based production of hydrocarbons |
25 |
| Scenarios of energy efficiency and CO2 emissions reduction potential in the buildings sector in China to year 2050 |
24 |
| Increasing markets and decreasing package weight for high-specific-power photovoltaics |
24 |
| Efficient hybrid colloidal quantum dot/organic solar cells mediated by near-infrared sensitizing small molecules |
24 |
| Public perceptions of and responses to new energy technologies |
24 |
| Direct air capture of CO2 via aqueous-phase absorption and crystalline-phase release using concentrated solar power |
24 |
| Decoupling between water use and thermoelectric power generation growth in China |
23 |
| A 19.9%-efficient ultrathin solar cell based on a 205-nm-thick GaAs absorber and a silver nanostructured back mirror |
23 |
| Hybrid dynamic windows using reversible metal electrodeposition and ion insertion |
23 |
| Efficient thermal management of Li-ion batteries with a passive interfacial thermal regulator based on a shape memory alloy |
22 |
| An evaluation of air quality, home heating and well-being under Beijing's programme to eliminate household coal use |
22 |
| Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment |
21 |
| A passivating contact for silicon solar cells formed during a single firing thermal annealing |
20 |
| Exploring the bottlenecks of anionic redox in Li-rich layered sulfides |
20 |
| Comparative net energy analysis of renewable electricity and carbon capture and storage |
20 |
| Virtual water transfers of the US electric grid |
20 |
| Enhancing power density of biophotovoltaics by decoupling storage and power delivery |
20 |
| Understanding the cell-to-module efficiency gap in Cu(In,Ga) (S,Se)(2) photovoltaics scale-up |
19 |
| Rapid fuel switching from coal to natural gas through effective carbon pricing |
19 |
| Implications of net energy-return-on-investment for a low-carbon energy transition |
19 |
| High-capacity methane storage in flexible alkane-linked porous aromatic network polymers |
18 |
| Techno-economic viability of silicon-based tandem photovoltaic modules in the United States |
18 |
| Planning for electric vehicle needs by coupling charging profiles with urban mobility |
17 |
| Designing low-carbon power systems for Great Britain in 2050 that are robust to the spatiotemporal and inter-annual variability of weather |
17 |
| Probing the thermal effects of voltage hysteresis in anionic redox-based lithium-rich cathodes using isothermal calorimetry |
17 |
| Estimation of losses in solar energy production from air pollution in China since 1960 using surface radiation data |
16 |
| Direct upstream integration of biogasoline production into current light straight run naphtha petrorefinery processes |
16 |
| Quantitative experimental assessment of hot carrier-enhanced solar cells at room temperature |
16 |
| Real-time feedback promotes energy conservation in the absence of volunteer selection bias and monetary incentives |
16 |
| A simplified skyline-based method for estimating the annual solar energy potential in urban environments |
16 |
| A general form of smart contract for decentralized energy systems management |
15 |
| Dismissive and deceptive car dealerships create barriers to electric vehicle adoption at the point of sale |
15 |
| Using sales data to assess cooking gas adoption and the impact of India's Ujjwala programme in rural Karnataka |
14 |
| Interaction of consumer preferences and climate policies in the global transition to low-carbon vehicles |
14 |
| Effects of turbine technology and land use on wind power resource potential |
14 |
| Empirical evaluation of the stringency and design of renewable portfolio standards |
14 |
| Coupling orientation and mediation strategies for efficient electron transfer in hybrid biofuel cells |
13 |
| Impacts of fleet types and charging modes for electric vehicles on emissions under different penetrations of wind power |
13 |
| Life-cycle energy and climate benefits of energy recovery from wastes and biomass residues in the United States |
13 |
| Energy harvesting near room temperature using a thermomagnetic generator with a pretzel-like magnetic flux topology |
13 |
| Efficient pH-gradient-enabled microscale bipolar interfaces in direct borohydride fuel cells |
13 |
| The cost of reliability in decentralized solar power systems in sub-Saharan Africa |
12 |
| Germany's decision to phase out coal by 2038 lags behind citizens' timing preferences |
11 |
| Simulating the value of electric-vehicle-grid integration using a behaviourally realistic model |
11 |
| Economic viability of thin-film tandem solar modules in the United States |
11 |
| Impact of myopic decision-making and disruptive events in power systems planning |
11 |
| Exploring the impact of network tariffs on household electricity expenditures using load profiles and socio-economic characteristics |
11 |
| The effect of oil and gas price and price volatility on rig activity in tight formations and OPEC strategy |
11 |
| Global scenarios for significant water use reduction in thermal power plants based on cooling water demand estimation using satellite imagery |
10 |
| Evaluating the factors that led to low-priced solar electricity projects in the Middle East |
10 |
| Selective high-temperature CO2 electrolysis enabled by oxidized carbon intermediates |
10 |
| Decoupling electron and ion storage and the path from interfacial storage to artificial electrodes |
10 |
| Thermoelectric properties and performance of flexible reduced graphene oxide films up to 000 K |
10 |
| Future scenarios for energy consumption and carbon emissions due to demographic transitions in Chinese households |
9 |
| Energy requirements for decent living in India, Brazil and South Africa |
9 |
| A framework for evaluating geographic disparities in energy transition vulnerability |
9 |
| Challenges and gaps for energy planning models in the developing-world context |
9 |
| A strong relative preference for wind turbines in the United States among those who live near them |
8 |
| Well-to-refinery emissions and net-energy analysis of China's crude-oil supply |
8 |
| Path dependency in provision of domestic heating |
8 |
| Inter-seasonal compressed-air energy storage using saline aquifers |
8 |
| Performance and resilience of hydrokinetic turbine arrays under large migrating fluvial bedforms |
7 |
| An intertemporal decision framework for electrochemical energy storage management |
6 |
| High-resolution techno-ecological modelling of a bioenergy landscape to identify climate mitigation opportunities in cellulosic ethanol production |
6 |
| Inaccurate consumer perceptions of monetary savings in a demand-side response programme predict programme acceptance |
6 |
| Simple interventions can correct misperceptions of home energy use |
6 |
| Faradaically selective membrane for liquid metal displacement batteries |
6 |
| The German energy transition in the British, Finnish and Hungarian news media |
5 |
| National context is a key determinant of energy security concerns across Europe |
5 |
| Estimation of the year-on-year volatility and the unpredictability of the United States energy system |
5 |
| Planning power systems in fragile and conflict-affected states |
5 |
| Dynamic photovoltaic building envelopes for adaptive energy and comfort management |
4 |
| Fuels and energy carriers from single-site catalysts prepared via surface organometallic chemistry |
4 |
| Households with solar installations are ideologically diverse and more politically active than their neighbours |
4 |
| Equity and the willingness to pay for green electricity in Germany |
4 |
| Political enablers of energy subsidy reform in Middle Eastern oil exporters |
4 |
| Fuel choice and fuel demand elasticities in markets with flex-fuel vehicles |
4 |
