| Valuable bioproducts obtained from microalgal biomass and their commercial applications: A review |
25 |
| Petroleum sludge treatment and disposal: A review |
14 |
| Water treatment sludge for removal of heavy metals from electroplating wastewater |
9 |
| Fixed bed column modeling of lead(II) and cadmium(II) ions biosorption on sugarcane bagasse |
9 |
| Quorum quenching for effective control of biofouling in membrane bioreactor: A comprehensive review of approaches, applications, and challenges |
8 |
| Biosorption of methylene blue from aqueous solution by agricultural bioadsorbent corncob |
8 |
| Optimizing slow pyrolysis of banana peels wastes using response surface methodology |
7 |
| Electrochemical dehalogenation of disinfection by-products and iodine-containing contrast media: A review |
6 |
| Potential degradation of methylene blue (MB) by nano-metallic particles: A kinetic study and possible mechanism of MB degradation |
6 |
| Heavy metals removal from aqueous solution through micellar enhanced ultrafiltration: A review |
6 |
| Analysis of environmental impact of activated carbon production from wood waste |
6 |
| Simultaneous quantitative analysis of four isothiazolinones and 3-iodo-2-propynyl butyl carbamate in hygienic consumer products |
6 |
| Adsorption of phosphate in water on a novel calcium hydroxide-coated dairy manure-derived biochar |
6 |
| Exhaust emissions of a diesel engine using ethanol-in-palm oil/diesel microemulsion-based biofuels |
5 |
| Prediction of short-term algal bloom using the M5P model-tree and extreme learning machine |
5 |
| Removal of toxic hydroquinone: Comparative studies on use of iron impregnated granular activated carbon as an adsorbent and catalyst |
5 |
| A comprehensive optimization model for integrated solid waste management system: A case study |
5 |
| Maximizing biogas production by pretreatment and by optimizing the mixture ratio of co-digestion with organic wastes |
5 |
| Lithium ion car batteries: Present analysis and future predictions |
5 |
| Improved structures of stainless steel current collector increase power generation of microbial fuel cells by decreasing cathodic charge transfer impedance |
5 |
| Optimization of chemical cleaning for reverse osmosis membranes with organic fouling using statistical design tools |
5 |
| Immobilization of Prussian blue nanoparticles in acrylic acid-surface functionalized poly(vinyl alcohol) sponges for cesium adsorption |
4 |
| Microbial population dynamics in constructed wetlands: Review of recent advancements for wastewater treatment |
4 |
| Ultrafiltration of palm oil mill effluent: Effects of operational pressure and stirring speed on performance and membranes fouling |
4 |
| Heterotrophic nitrification-aerobic denitrification potential of cyanide and thiocyanate degrading microbial communities under cyanogenic conditions |
4 |
| Engineered biochar from pine wood: Characterization and potential application for removal of sulfamethoxazole in water |
4 |
| Numerical simulation of a regenerative thermal oxidizer for volatile organic compounds treatment |
4 |
| Enrichment of poultry manure with biomass ash to produce organomineral fertiliser |
4 |
| Removal of heavy metals in electroplating wastewater by powdered activated carbon (PAC) and sodium diethyldithiocarbamate-modified PAC |
4 |
| The roles of polyethersulfone and polyethylene glycol additive on nanofiltration of dyes and membrane morphologies |
4 |
| Phosphogypsum purification for plaster production: A process optimization using full factorial design |
4 |
| A combined approach to evaluate activity and structure of soil microbial community in long-term heavy metals contaminated soils |
4 |
| Spatial moment analysis of multispecies contaminant transport in porous media |
4 |
| Groundwater pollution risk mapping using modified DRASTIC model in parts of Hail region of Saudi Arabia |
4 |
| Phenolic compounds removal by grasses and soil bacteria after land application of treated palm oil mill effluent: A pot study |
4 |
| Nitrogen removal and electrochemical characteristics depending on separators of two-chamber microbial fuel cells |
4 |
| Optimization of operating parameters to remove and recover crude oil from contaminated soil using subcritical water extraction process |
3 |
| Enhanced photocatalytic oxidation of humic acids using Fe3+-Zn2+ co-doped TiO2: The effects of ions in aqueous solutions |
3 |
| Advances in microalgal biomass/bioenergy production with agricultural by-products: Analysis with various growth rate models |
3 |
| Cometabolism degradation of lignin in sequencing batch biofilm reactors |
3 |
| Investigating production parameters and impacts of potential emissions from soybean biodiesel stored under different conditions |
3 |
| Occurrence and control of N-nitrosodimethylamine in water engineering systems |
3 |
| Treatment of surface water using cold plasma for domestic water supply |
3 |
| Risk assessment of heavy metals in soil based on the geographic information system-Kriging technique in Anka, Nigeria |
3 |
| A new approach for detoxification of landfill leachate using Trametes trogii |
3 |
| Effect of seaweed addition on enhanced anaerobic digestion of food waste and sewage sludge |
3 |
| Seasonal variation of assimilable organic carbon and its impact to the biostability of drinking water |
3 |
| Transformation of dissolved organic matter in a constructed wetland: A molecular-level composition analysis using pyrolysis-gas chromatography mass spectrometry |
3 |
| Use of tar color additives as a light filter to enhance growth and lipid production by the microalga Nannochloropsis gaditana |
3 |
| Performance of Fusarium oxysporum EKT01/02 isolate in cyanide biodegradation system |
3 |
