| Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete |
37 |
| Mechanical and durability properties of fly ash and slag based geopolymer concrete |
12 |
| Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag |
11 |
| Sustainable use of mine waste and tailings with suitable admixture as aggregates in concrete pavements-A review |
10 |
| Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete |
10 |
| Review study towards effect of Silica Fume on the fresh and hardened properties of concrete |
10 |
| Performance of self-compacting concrete at room and after elevated temperature incorporating Silica fume |
10 |
| Influence of supplementary cementitious materials on strength and durability characteristics of concrete |
9 |
| Shear performance of an innovative UHPFRC deck of composite bridge with coarse aggregate |
8 |
| Effect of steel fibres and nano silica on fracture properties of medium strength concrete |
8 |
| Dynamic analysis of concrete column reinforced with Sio(2) nanoparticles subjected to blast load |
7 |
| Agglomerated SiO2 nanoparticles reinforced-concrete foundations based on higher order shear deformation theory: Vibration analysis |
7 |
| Performance of self-compacting concrete with manufactured crushed sand |
6 |
| Effect of PCE superplasticizers on rheological and strength properties of high strength self-consolidating concrete |
5 |
| Mechanical and fracture properties of glass fiber reinforced geopolymer concrete |
5 |
| An experimental and numerical approach in strength prediction of reclaimed rubber concrete |
5 |
| Influence of mineral by-products on compressive strength and microstructure of concrete at high temperature |
5 |
| A new method to estimate rheological properties of lubricating layer for prediction of concrete pumping |
5 |
| Effects of glass powder on the characteristics of concrete subjected to high temperatures |
5 |
| Feasibility study of ambient cured geopolymer concrete -A review |
4 |
| Geometrical dimensions effects on the seismic response of concrete gravity dams |
4 |
| Repair, retrofitting and rehabilitation techniques for strengthening of reinforced concrete beams - A review |
4 |
| Effects of cement dosage and steel fiber ratio on the mechanical properties of reactive powder concrete |
4 |
| Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation |
4 |
| Numerical simulation approach for structural capacity of corroded reinforced concrete bridge |
4 |
| Effect of diameter of MWCNT reinforcements on the mechanical properties of cement composites |
4 |
| The role of slenderness on the seismic behavior of ground-supported cylindrical silos |
4 |
| Numerical analysis of concrete degradation due to chloride-induced steel corrosion |
4 |
| Durability properties of concrete containing metakaolin |
3 |
| Effects of sulphuric acid on mechanical and durability properties of ECC confined by FRP fabrics |
3 |
| Assessment of damages on a RC building after a big fire |
3 |
| Mechanical behaviour of steel fibre reinforced SCC after being exposed to fire |
3 |
| Mechanical and durability properties of marine concrete using fly ash and silpozz |
3 |
| An experimental study on effect of Colloidal Nano-Silica on tetranary blended concrete |
3 |
| Probabilistic seismic demand of isolated straight concrete girder highway bridges using fragility functions |
3 |
| Effect of ultra-fine slag on mechanical and permeability properties of Metakaolin-based sustainable geopolymer concrete |
3 |
| Experimental study on effect of EBRIG shear strengthening method on the behavior of RC beams |
3 |
| Strength and abrasion resistance of roller compacted concrete incorporating GGBS and two types of coarse aggregates |
3 |
| Computation of stress-deformation of deep beam with openings using finite element method |
3 |
| Modeling of ultimate value and kinetic of compressive strength and hydration heat of concrete made with different replacement rates of silica fume and w/b ratios |
3 |
| Residual strength capacity of fire-exposed circular concrete-filled steel tube stub columns |
3 |
| Performance of self-compacting geopolymer concrete with and without GGBFS and steel fiber |
3 |
| Effect of porosity on frost resistance of Portland cement pervious concrete |
2 |
| Mechanical characteristics of a classical concrete lightened by the addition of treated straws |
2 |
| Experimental evaluation of splicing of longitudinal bars with forging welding in flexural reinforced concrete beams |
2 |
| Crack control of precast deck loop joint using high strength concrete |
2 |
| Shear strengthening of deficient concrete beams with marine grade aluminium alloy plates |
2 |
| A study on the effects of vertical mass irregularity on seismic performance of tunnel-form structural system |
2 |
| Effect of low-calcium fly ash on sulfate resistance of cement paste under different exposure conditions |
2 |
| Evaluation of 3D concrete printing performance from a rheological perspective |
2 |
