| Design of a 3D printed concrete bridge by testing |
24 |
| Effect of support on printed properties in fused deposition modelling processes |
22 |
| Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring |
21 |
| Optimisation of multi-part production in additive manufacturing for reducing support waste |
21 |
| Time gap effect on bond strength of 3D-printed concrete |
20 |
| Ductility of 3D printed concrete reinforced with short straight steel fibers |
20 |
| Investigation of the accuracy and roughness in the laser powder bed fusion process |
19 |
| Smart materials in additive manufacturing: state of the art and trends |
16 |
| 3D food printing: a categorised review of inks and their development |
16 |
| Analysis and prediction of printable bridge length in fused deposition modelling based on back propagation neural network |
16 |
| A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4V |
16 |
| An integrated design methodology for components produced by laser powder bed fusion (L-PBF) process |
15 |
| Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing |
15 |
| In situ alloying of elemental Al-Cu12 feedstock using selective laser melting |
14 |
| Novel Mg-based alloys by selective laser melting for biomedical applications: microstructure evolution, microhardness and in vitro degradation behaviour |
13 |
| Design and experimental validation of self-supporting topologies for additive manufacturing |
13 |
| Surface integrity of Inconel 718 by hybrid selective laser melting and milling |
12 |
| Research progress of ceramic matrix composite parts based on additive manufacturing technology |
10 |
| Minimum length scale constraints in multi-scale topology optimisation for additive manufacturing |
10 |
| Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures |
10 |
| Numerical and experimental assessment of the mechanical properties of 3D printed 18-Ni300 steel trabecular structures produced by Selective Laser Melting - a lean design approach |
10 |
| Selective laser melting of Zn-Ag alloys for bone repair: microstructure, mechanical properties and degradation behaviour |
9 |
| Optimisation of FDM process parameters by Taguchi method for imparting customised properties to components |
9 |
| Infrared thermal imaging for melt pool analysis in SLM: a feasibility investigation |
9 |
| Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process |
8 |
| Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling |
8 |
| Modelling and estimation of tensile behaviour of polylactic acid parts manufactured by fused deposition modelling using finite element analysis and knowledge-based library |
7 |
| Failure In metal honeycombs manufactured by selective laser melting of 304 L stainless steel under compression |
7 |
| Influence of infill properties on flexural rigidity of 3D-printed structural members |
7 |
| A framework for multi-objective optimisation of 3D part-build orientation with a desired angular resolution in additive manufacturing processes |
6 |
| Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes |
6 |
| Using Big Area Additive Manufacturing to directly manufacture a boat hull mould |
6 |
| Wrapping effect of secondary phases on the grains: increased corrosion resistance of Mg-Al alloys |
6 |
| The influence of slicing parameters on the multi-material adhesion mechanisms of FDM printed parts: an exploratory study |
6 |
| 3D scanning and geometry processing techniques for customised hand orthotics: an experimental assessment |
5 |
| Aesthetic reconstruction of microtia: a review of current techniques and new 3D printing approaches |
5 |
| Effects of TiO2 doping on microstructure and properties of directed laser deposition alumina/aluminum titanate composites |
5 |
| Effect of SiC/Al2O3 particle size reinforcement in recycled LDPE matrix on mechanical properties of FDM feed stock filament |
5 |
| Design By Additive Manufacturing: an application in aeronautics and defence |
5 |
| Comparison of three-dimensional surface scanning techniques for capturing the external ear |
5 |
| 3D Metal printed heat sinks with longitudinally varying lattice structure sizes using direct metal laser sintering |
5 |
| Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing |
5 |
| Effects of direct metal deposition combined with intermediate and final milling on part distortipon |
4 |
| Using multi-axis material extrusion to improve mechanical properties through surface reinforcement |
4 |
| Biodegradation mechanisms of selective laser-melted Mg-xAl-Zn alloy: grain size and intermetallic phase |
4 |
| Energy and material flow modelling of additive manufacturing processes |
4 |
| The design and assessment of bio-inspired additive manufactured stab-resistant armour |
3 |
| Fracture toughness of additively manufactured ULTEM 1010 |
3 |
| Influence of surface pores on selective laser melted parts under lubricated contacts: a case study of a hydraulic spool valve |
3 |
| An overview of selective laser sintering and melting research using bibliometric indicators |
3 |
