| Rice husk/rice husk ash as an alternative source of silica in ceramics: A review |
21 |
| Visible light enhanced photocatalytic degradation of methylene blue by ternary nanocomposite, MoO3/Fe2O3/rGO |
19 |
| High entropy Sr((Zr0.94Y0.06)(0.2)Sn0.2Ti0.2Hf0.2Mn0.2)O3-x perovskite synthesis by reactive spark plasma sintering |
13 |
| Influence of different sodium-based additives on corrosion resistance of PEO coatings on pure Ti |
11 |
| Barium titanate microspheres by low temperature hydrothermal method: studies on structural, morphological, and optical properties |
10 |
| Alumina-MWCNT composites: microstructural characterization and mechanical properties |
8 |
| Study of physical and dielectric properties of bio-waste-derived synthetic wollastonite |
7 |
| Water resistance and thermal behavior of metakaolin-phosphate-based geopolymer cements |
7 |
| Influence of precursor calcination temperature on sintering and conductivity of Li1.5Al0.5Ti1.5(PO4)(3) ceramics |
7 |
| A new route to sol-gel crystalline wollastonite bioceramic |
7 |
| Influence of tin precursor concentration on physical properties of nebulized spray deposited tin disulfide thin films |
7 |
| Studies on corrosion inhibitory effect and adsorption behavior of waste materials on mild steel in acidic medium |
6 |
| Microstructural evaluation of CoAl2O4 nanoparticles by Williamson-Hall and size-strain plot methods |
6 |
| Electrical and thermal properties of off-stoichiometric SiC prepared by spark plasma sintering |
6 |
| Luminescence and decay characteristics of Tb3+-doped fluorophosphate glasses |
6 |
| The structural and magnetic properties, non-Debye relaxation and hopping mechanism in PbxNd1-xFeO3 (where x = 0. 0.2 and 0.3) solid solutions |
6 |
| Efficient production of dihydroxyacetone from glycerol over a Pt/CeO2-ZrO2-Bi2O3/SBA-16 catalyst |
6 |
| Facile green synthesis of Fe3O4 nanoparticles using aqueous leaf extract of Zanthoxylum armatum DC. for efficient adsorption of methylene blue |
6 |
| Bioactive coating as a surface modification technique for biocompatible metallic implants: a review |
6 |
| Enhanced antimicrobial properties of bioactive glass using strontium and silver oxide nanocomposites |
5 |
| Doped biphasic calcium phosphate: synthesis and structure |
5 |
| Immobilized carbon-doped TiO2 in polyamide fibers for the degradation of methylene blue |
5 |
| N Structural, optical, room-temperature and low-temperature magnetic properties of Mg-Zn nanoferrite ceramics |
5 |
| Grain size dependence of the microstructures and functional properties of (Ba-0(.85) Ca-0(.15-x) Ce-x) (Zr0.1Ti0.9) O-3 lead-free piezoelectric ceramics |
5 |
| Preparation of porous ceramic membranes from Sayong ball clay |
4 |
| Fabrication, characterization, fouling behavior and performance study of ceramic microfiltration membranes for oily wastewater treatment |
4 |
| Porous structure engineering of bioceramic hydroxyapatite-based scaffolds using PVA, PVP, and PEO as polymeric porogens |
4 |
| Microstructure and mechanical, physical and structural properties of sustainable lightweight metakaolin-based geopolymer cements and mortars employing rice husk |
4 |
| Conductivity relaxation and oxygen vacancies-related electron hopping mechanism in Pb1-xLax/2Smx/2Ti1-xFexO3 solid solutions |
4 |
| Significant improvement in Curie temperature and piezoelectric properties of BaTiO3 with minimum Pb addition |
4 |
| Optimum conditions for unit processing of artificial lightweight aggregates using the Taguchi method |
4 |
| Effect of Nb substitution on structural, electrical and electrochemical properties of LiTi2(PO4)(3) as electrolyte materials for lithium ion batteries |
3 |
| Accelerated induction of in vitro apatite formation by parallel alignment of hydrothermally oxidized titanium substrates separated by sub-millimeter gaps |
3 |
| Room-temperature BTEX sensing characterization of nanostructured ZnO thin films |
3 |
| Effect of oxygen vacancies on direct N2O decomposition over ZrO2-Y2O3 catalysts |
3 |
| Bipolar resistive switching characteristics of amorphous SrTiO3 thin films prepared by the sol-gel process |
3 |
| Finite-element modeling of piezoelectric energy harvesters using lead-based and lead-free materials for voltage generation |
3 |
| Synthesis and characterization of divalent ion conductors with NASICON-type structures |
3 |
| Low-temperature synthesis of LiCoO(2 )with eutectic of lithium precursors via the solid-sate reaction method |
3 |
| Effects of slag content on the residual mechanical properties of ambient air-cured geopolymers exposed to elevated temperatures |
3 |
| Photoluminescence features of new Eu-3(+)-doped Gd4Mo7O27 phosphors synthesized using glass crystallization technique |
3 |
| Oriented siloxane-containing vaterite/poly(lactic acid) composite scaffolds for controlling osteoblast alignment and proliferation |
3 |
| Study of the electrical and optical properties of Ge27Se58Pb15 chalcogenide glass |
3 |
| Thermoelectric properties of S and Te-doped Cu2SnSe3 prepared by combustion synthesis |
3 |
| White light-emitting Dy3+-doped transparent chloroborosilicate glass: synthesis and optical properties |
3 |
| Mechanical properties of partially stabilized zirconia for dental applications |
2 |
| Effects of compressive ratio and sintering temperature on mechanical properties of biocompatible collagen/hydroxyapatite composite scaffolds fabricated for bone tissue engineering |
2 |
| Mechanical and thermal properties of porous yttria-stabilized zirconia |
2 |
| Composition, valence and oxygen reduction reaction activity of Mn-based layered double hydroxides |
2 |
| Densification of lightweight aluminum borate ceramics by direct sintering of milled powders |
2 |
