| Recent progress of nanomaterials for microwave absorption |
47 |
| A high-entropy silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si-2 |
39 |
| Requirements for the transfer of lead-free piezoceramics into application |
36 |
| Electrophoretic deposition of graphene-based materials: A review of materials and their applications |
32 |
| Thermoelectric interface materials: A perspective to the challenge of thermoelectric power generation module |
19 |
| Ultrahigh energy density and improved discharged efficiency in bismuth sodium titanate based relaxor ferroelectrics with A-site vacancy |
19 |
| Facile synthesis of graphene via reduction of graphene oxide by artemisinin in ethanol |
19 |
| Photocatalytic oxidation of gaseous benzene, toluene and xylene under UV and visible irradiation over Mn-doped TiO2 nanoparticles |
17 |
| Low-cost and environmentally benign selenides as promising thermoelectric materials |
17 |
| Microwave absorption of aluminum/hydrogen treated titanium dioxide nanoparticles |
17 |
| Integration of silicon nanowires in solar cell structure for efficiency enhancement: A review |
16 |
| (Bi0.51Na0.47)TiO3 based lead free ceramics with high energy density and efficiency |
16 |
| Sensitive electrochemical DNA sensor for the detection of HIV based on a polyaniline/graphene nanocomposite |
14 |
| Enhanced thermoelectric performance of n-type bismuth-telluride-based alloys via In alloying and hot deformation for mid-temperature power generation |
13 |
| Oxygen-vacancy-related dielectric relaxation behaviours and impedance spectroscopy of Bi(Mg1/2Ti1/2)O-3 modified BaTiO3 ferroelectric ceramics |
13 |
| Influence of Bi on the thermoelectric properties of SrTiO3-delta |
13 |
| High discharged energy density of polymer nanocomposites induced by Nd-doped BaTiO3 nanoparticles |
12 |
| Realizing high low-electric-field energy storage performance in AgNbO3 ceramics by introducing relaxor behaviour |
12 |
| beta-Ga2O3 nanowires and thin films for metal oxide semiconductor gas sensors: Sensing mechanisms and performance enhancement strategies |
12 |
| Revisiting the ionic diffusion mechanism in Li3PS4 via the joint usage of geometrical analysis and bond valence method |
11 |
| Defect engineering of two-dimensional materials for efficient electrocatalysis |
11 |
| A self-standing, UV-cured semi-interpenetrating polymer network reinforced composite gel electrolytes for dendrite-suppressing lithium ion batteries |
10 |
| Synthesis, crystal structure and microwave dielectric properties of self-temperature stable Ba1-xSrxCuSi2O6 ceramics for millimeter-wave communication |
10 |
| Transport properties of p-type CaMg2Bi2 thermoelectrics |
9 |
| Glass modified barium strontium titanate ceramics for energy storage capacitor at elevated temperatures |
9 |
| Flexible mica films for high-temperature energy storage |
9 |
| Lead-free textured piezoceramics using tape casting: A review |
9 |
| Mechanical properties of nanocomposites reinforced by carbon nanotube sponges |
9 |
| Enhanced thermoelectric performance in p-type ZrCoSb based half-Heusler alloys employing nanostructuring and compositional modulation |
8 |
| Single femtosecond laser beam induced nanogratings in transparent media - Mechanisms and applications |
8 |
| Toward artificial intelligent self-cooling electronic skins: Large electrocaloric effect in all-inorganic flexible thin films at room temperature |
8 |
| Polarization reversal via a transient relaxor state in nonergodic relaxors near freezing temperature |
7 |
| Rapid identification of two-dimensional materials via machine learning assisted optic microscopy |
7 |
| Fabrication of Schiff base coordinated ZnS nanoparticles for enhanced photocatalytic degradation of chlorpyrifos pesticide and detection of heavy metal ions |
7 |
| Microstructure and composition engineering Yb single-filled CoSb3 for high thermoelectric and mechanical performances |
7 |
| Self-standing oxygen-deficient alpha-MoO3-x nanoflake arrays as 3D cathode for advanced all-solid-state thin film lithium batteries |
7 |
| Solvothermal-assisted liquid-phase exfoliation of large size and high quality black phosphorus |
7 |
| Phonon characteristics and dielectric properties of BaMoO4 ceramic |
7 |
| Synthesis and enhanced photocatalytic performance of Ag/AgCl/TiO2 nanocomposites prepared by ion exchange method |
7 |
| Scalable microfabrication of three-dimensional porous interconnected graphene scaffolds with carbon spheres for high-performance all carbon-based micro-supercapacitors |
6 |
| Criteria for the growth of large-area adlayer-free monolayer graphene films by chemical vapor deposition |
6 |
| Novel composite Nafion membranes modified with copper phthalocyanine tetrasulfonic acid tetrasodium salt for fuel cell application |
6 |
| Combining cold sintering and Bi2O3-Activated liquid-phase sintering to fabricate high-conductivity Mg-doped NASICON at reduced temperatures |
6 |
| The electromechanical features of LiNbO3 crystal for potential high temperature piezoelectric applications |
6 |
| Microstructure engineering beyond SnSe1-xSx solid solution for high thermoelectric performance |
6 |
| First-order phase transition and unexpected rigid rotation mode in hybrid improper ferroelectric (La, Al) co-substituted Ca3Ti2O7 ceramics |
5 |
| Balancing the anionic framework polarity for enhanced thermoelectric performance in YbMg2Sb2 Zintl compounds |
5 |
| Correlation of structural and electrical properties of PrBaCo2O5+delta thin films at high temperature |
5 |
| Atomic layer deposition of core-shell structured V2O5@CNT sponge as cathode for potassium ion batteries |
5 |
| Low-temperature sintered (Na1/2Bi1/2)TiO3-based incipient piezoceramics for co-fired multilayer actuator application |
5 |
