| A Comparative Study on Removal of Hazardous Anions from Water by Adsorption: A Review |
16 |
| Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment |
13 |
| Basicity Characterization of Imidazolyl Ionic Liquids and Their Application for Biomass Dissolution |
8 |
| Polyelectrolyte Complexation versus Ionotropic Gelation for Chitosan-Based Hydrogels with Carboxymethylcellulose, Carboxymethyl Starch, and Alginic Acid |
5 |
| Formaldehyde-Free Wood Composite Fabricated Using Oil Palm Starch Modified with Glutardialdehyde as the Binder |
5 |
| Physical and Rheological Properties of Egg Albumin Foams Are Affected by Ionic Strength and Basil Seed Gum Supplementation |
5 |
| Chemocatalytic Production of Lactates from Biomass-Derived Sugars |
5 |
| Corrosion Inhibition Mechanism of Mild Steel by Amylose-Acetate/Carboxymethyl Chitosan Composites in Acidic Media |
4 |
| Synthesis of a New Copper-Based Supramolecular Catalyst and Its Catalytic Performance for Biodiesel Production |
4 |
| Al-Waste-Based Zeolite Adsorbent Used for the Removal of Ammonium from Aqueous Solutions |
4 |
| One-Step Synthesis of CaO-ZnO Efficient Catalyst for Biodiesel Production |
4 |
| Adsorption Studies of Textile Dye (Chrysoidine) from Aqueous Solutions Using Activated Sawdust |
4 |
| Anaerobic Codigestion of Sugarcane Press Mud with Food Waste: Effects on Hydrolysis Stage, Methane Yield, and Synergistic Effects |
4 |
| Combined Application of Coagulation/Flocculation/Sedimentation and Membrane Separation for the Treatment of Laundry Wastewater |
4 |
| Chemical Oxidation for Oil Separation from Oilfield Produced Water under UV Irradiation Using Titanium Dioxide as a Nano-Photocatalyst by Batch and Continuous Techniques |
4 |
| Qualitative and Quantitative Analysis of Graphene-Based Adsorbents in Wastewater Treatment |
3 |
| Influence of Degree of Dispersion of Noncovalent Functionalized Graphene Nanoplatelets on Rheological Behaviour of Aqueous Drilling Fluids |
3 |
| Predicting CO2 Permeation through an Enhanced Ionic Liquid Mixed Matrix Membrane (IL3M) |
3 |
| Activated Carbon from Prickly Pear Seed Cake: Optimization of Preparation Conditions Using Experimental Design and Its Application in Dye Removal |
3 |
| CFD Analysis of Pressure Losses and Deposition Velocities in Horizontal Annuli |
3 |
| Pre-Reducing Process Kinetics to Recover Metals from Nickel Leach Waste Using Chelating Resins |
3 |
| Membrane Transport of Nonelectrolyte Solutions in Concentration Polarization Conditions: H-r Form of the Kedem-Katchalsky-Peusner Equations |
3 |
| Influence of Ethanol Organosolv Pulping Conditions on Physicochemical Lignin Properties of European Larch |
3 |
| Mass and Heat Transport Models for Analysis of the Drying Process in Porous Media: A Review and Numerical Implementation |
3 |
| Carbon-Based Catalyst from Pyrolysis of Waste Tire for Catalytic Ethanol Dehydration to Ethylene and Diethyl Ether |
3 |
| Column Efficiency of Fluoride Removal Using Quaternized Palm Kernel Shell (QPKS) |
3 |
| Effect of Metal Chlorides on the Pyrolysis of Wheat Straw |
2 |
| Biosynthesis and Characterization of Iron Nanoparticles for Effective Adsorption of Cr(VI) |
2 |
| Numerical Simulation of Gas-Liquid Flow in a Bubble Column by Intermittent Aeration in Newtonian Liquid/Non-Newtonian Liquid |
2 |
| Converting a Microwave Oven into a Plasma Reactor: A Review |
2 |
| A Moving Boundary Model for Isothermal Drying and Shrinkage of Chayote Discoid Samples: Comparison between the Fully Analytical and the Shortcut Numerical Approaches |
2 |
| &IT Tectona grandis&IT Capped Silver-Nanoparticle Material Effects on Microbial Strains Inducing Microbiologically Influenced Corrosion |
2 |
| Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil |
2 |
| Impact of Additives on Heterogeneous Crystallization of Acetaminophen |
2 |
| An Experimental Approach to Formulate Lignin-Based Surfactant for Enhanced Oil Recovery |
2 |
| Densities, Apparent Molar Volume, Expansivities, Hepler's Constant, and Isobaric Thermal Expansion Coefficients of the Binary Mixtures of Piperazine with Water, Methanol, and Acetone at T=293.15 to 328.15 K |
2 |
| Assessment of the Use of Epicarp and Mesocarp of Green Coconut for Removal of Fluoride Ions in Aqueous Solution |
2 |
| Coupling Solvent Extraction Units to Cyclic Adsorption Units |
2 |
| One Two and Three-Parameter Isotherms, Kinetics, and Thermodynamic Evaluation of Co(II) Removal from Aqueous Solution Using Dead Neem Leaves |
2 |
| Theoretical Study of the Effect of Instrument Parameters on the Flow Field of Air-Flow Impacting Based Mechanochemical Synthesis |
2 |
| Upgrading of Carbohydrates to the Biofuel Candidate 5-Ethoxymethylfurfural (EMF) |
2 |
| PHEMA Hydrogels Obtained by Infrared Radiation for Cartilage Tissue Engineering |
2 |
| Study of the Equilibrium, Kinetics, and Thermodynamics of Boron Removal from Waters with Commercial Magnesium Oxide |
2 |
| Application of Carboxymethyl Chitosan-Benzaldehyde as Anticorrosion Agent on Steel |
2 |
| Inexpensive Apparatus for Fabricating Microspheres for 5-Fluorouracil Controlled Release Systems |
2 |
| Cell Disruption of Chaetoceros calcitrans by Microwave and Ultrasound in Lipid Extraction |
2 |
| Correlation between Surface Energy and Adhesion Force of Polyethylene/Paperboard: A Predictive Tool for Quality Control in Laminated Packaging |
2 |
| Modeling Residence Time Distribution (RTD) Behavior in a Packed-Bed Electrochemical Reactor (PBER) |
2 |
| A Framework and Numerical Solution of the Drying Process in Porous Media by Using a Continuous Model |
2 |
| Catalytic Activity of a Composition Based on Strontium Bismuthate and Bismuth Carbonate at the Exposure to the Light of the Visible Range |
2 |
