| Adhesive systems used in the European particleboard, MDF and OSB industries |
34 |
| Structural robustness and timber buildings - a review |
11 |
| Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems |
9 |
| Wood modification with DMDHEU (1.3-dimethylol-4.5-dihydroxyethyleneurea) - State of the art, recent research activities and future perspectives |
7 |
| Chemical characterization of Pinus halepensis sapwood and heartwood |
6 |
| Advanced recycling of post-consumer solid wood and MDF |
6 |
| Improvement of mechanical properties of thermally modified hardwood through melamine treatment |
5 |
| Fungal and bacterial colonies growing on weathered wood surfaces |
5 |
| Termite resistance of beech wood treated with zinc oxide and zinc borate nanocompounds |
5 |
| Moisture-induced stresses in large glulam beams. Case study: Vihantasalmi Bridge |
5 |
| Analysis of sanding parameters on surface properties and coating performance of red oak wood |
4 |
| Long-term material properties of circular hollow laminated veneer lumber sections under water saturation and cement alkaline attack |
4 |
| Surface mould growth on wooden claddings - effects of transient wetting, relative humidity, temperature and material properties |
4 |
| A probabilistic study of brittle failure in dowel-type timber connections with steel plates loaded parallel to the grain |
4 |
| Performance of wood in the Franja partisan hospital |
4 |
| Moisture-related adjustment factor to obtain a reference ultrasonic velocity in structural lumber of plantation hardwood |
3 |
| Effect of acetylation on the chemical composition of hornbeam (Carpinus betulus L.) in relation with the physical and mechanical properties |
3 |
| Improvement of dimensional stability of wood by silica nanoparticles |
3 |
| Consumers' perceptions on the properties of wood affecting their willingness to live in and prejudices against houses made of timber |
3 |
| Design and performance prediction of timber bridges based on a factorization approach |
3 |
| Fungal-copper interactions in wood examined with large field of view synchrotron-based X-ray fluorescence microscopy |
3 |
| Laboratory and environmental decay of wood-plastic composite boards: flexural properties |
3 |
| Grading and mechanical characterization of small-diameter round chestnut (Castanea sativa Mill.) timber from thinning operations |
2 |
| Development of a monitoring system for guided circular saws: an experimental investigation |
2 |
| An experimental approach to determine pull-out strength of single and multiple axially loaded steel rods bonded in glulam parallel to the grain |
2 |
| Institutional and policy frameworks shaping the wooden multi-storey construction markets: a comparative case study on Austria and Finland |
2 |
| Shrinkage variation in Japanese larch (Larix kaempferi, [Lamb.]Carr.) progenies/provenances trials in Eastern Canada |
2 |
| Dual borate and copper naphthenate treatment of bridge timbers - potential cost savings by various performance enhancements |
2 |
| A review on the protection of timber bridges |
2 |
| Impact of cyclic compressive loading and moisture content on the mechanical behavior of Aucoumea Klaineana Pierre |
2 |
| Densification, screw holding strength, and Brinell hardness of European beech and poplar oriented strand boards |
2 |
| Susceptibility of thermo-hydro-treated birch plywood to mould and blue stain fungi |
2 |
| Performance of three-layer composites with densified surface layers of Nothofagus pumilio and N. antarctica from Southern Patagonian forests |
2 |
| Wooden buildings as carbon storages - Mitigation or oration? |
2 |
| Properties of axially loaded self-tapping screws with focus on application in hardwood |
1 |
| Short-term performance of wooden windows and facade elements made of thermally modified and non-modified Norway spruce in different natural environments |
1 |
| An assessment of greenhouse gas emissions from CLT and glulam in two residential nearly zero energy buildings |
1 |
| Cutting force analysis of a linear cutting process of spruce |
1 |
| Mechanical and physical screw withdrawal properties behavior of agglomerated panels reinforced with coir and pejibaye fibers |
1 |
| Modelling of pH effects and CIE L*a*b*colour spaces of beech wood-inhabiting fungi by NIRS |
1 |
| Studies on the material resistance and moisture dynamics of Common juniper, English yew, Black cherry, and Rowan |
1 |
| Design ideas for solid timber bridges |
1 |
| Multivariate product adapted grading of Scots Pine sawn timber for an industrial customer, part 2: Robustness to disturbances |
1 |
| Preparation, physical properties and ultraviolet resistance of wood nanocomposites based on modified soybean oil and bentonite |
1 |
| Material properties of wooden surfaces used in interiors and sensory stimulation |
1 |
| Moisture content and moisture-induced stresses of large glulam members: laboratory tests, in-situ measurements and modelling |
1 |
| Application of response surface methodology for evaluating particleboard properties made from cotton stalk particles |
1 |
| Relationship between branch-scar parameters and knot features of oriental beech (Fagus orientalis Libsky) |
1 |
| Moisture conditions of rain-exposed glue-laminated timber members: the effect of different detailing |
1 |
| Determination of reaction rate parameters for the acid copper chromate fixation reactions on oak (Quercus castaneifolia C. A. Mey) sapwood |
1 |
