| Incremental Feeding High-Pressure Sliding for Achieving Large Area of Severe Plastic Deformation |
5 |
| Development of High Thermally Conductive Flexible Elastomer as a Composite Material of Slide-Ring Material and Plasma-Surface-Modified Boron Nitride Particles: Effect of Plasma-Surface Modification of Boron Nitride Particles |
5 |
| Yielding and Deformation Behavior in Polycrystalline Ferritic Steel |
5 |
| Formation of Titanium/Zirconia Based Biomaterial Fabricated by Spark Plasma Sintering |
3 |
| Ductility Improvement Mechanism of Pure Titanium with Excessive Oxygen Solid Solution via Rapid Cooling Process |
3 |
| Changes in States of Carbon and Mechanical Properties with Aging at 50 degrees C after Quenching in Low Carbon Steel |
3 |
| Electrodeposition Behavior of Zn-Polyethyleneimine Composite from Sulfate Solution and Its Micro Structure |
2 |
| Strengthening of Mg-Al-Ca Die-Cast Alloy with Fine C15-Al2Ca Precipitates |
2 |
| Effect of Surface Textures of Steel Sheets on the Crystal Orientation Relationship between Zinc and Iron of Electrogalvanized Steel Sheets |
2 |
| Shaping of Aluminum Foam during Foaming Process Using Stainless Steel Mesh Mold |
2 |
| Microstructure Quantification in Wrought Ni-Based Superalloy Udimet 720Li |
2 |
| A Fundamental Study of Platinum Recovery from Spent Auto-Catalyst Using Dry Aqua Regia |
2 |
| Effect of Additives on Electrodeposition of Zn-Zr Oxide Composite from Dispersed Particles-Free Solution |
2 |
| Neutron Imaging Analysis of Hydrogen Content in Pure Palladium and Aluminum Alloys |
1 |
| Effect of Oxygen Addition on the Spinodal Decomposition and Hardness of Ti-4at% Mo Alloy |
1 |
| Thermoelectric Properties of Quasicrystalline Approximant in Al-Cu-Ir System |
1 |
| Fabrication of Aluminum Foam by Casting Precursor Method |
1 |
| Effect of Indentation Orientation on the Onset of Plastic Deformation for a MAX Phase Ti2AlC |
1 |
| Formation Mechanism of Dislocation Structures during Cyclic Deformation in an Fe-Si Alloy |
1 |
| Evolution of Quasi-Brittle Hydrogen-Assisted Damages in a Dual-Phase Steel |
1 |
| Three-Dimensional Morphology of C15-Al2Ca Precipitates in a Mg-Al-Ca Alloy |
1 |
| Magnetic-Field-Induced Enhancement of Phase Transformation in Ferromagnetic tau-Mn-Al |
1 |
| Effects of Bending and Tension Deformation on Texture Evolution and Room Temperature Formability of AZ31B Alloy Sheets |
1 |
| Microstructure and Properties of Laser Clad Ni-Base Intermetallic Alloys Reinforced with Carbide Particles |
1 |
| Development of Recycling System of Gold from Secondary Resources Using Organic Aqua Regius |
1 |
| Thermodynamic Analysis of the Al-Cu-Mg Ternary System |
1 |
| Development of a Production Method for Palladium Micrometer-Sized Particles Using DMSO Solvent Containing CuCl2 |
1 |
| Viscosity Measurement of Nickel and Stainless Steel Aiming at Systematic Viscosity Measurement for Molten Mixture of Stainless Steel and Boron-Carbide |
1 |
| Thermal Diffusivity Distribution Measurements of a High-Thermal-Conductive Heat Dissipating Sheet |
1 |
| Morphological Characteristics of Alumina Cluster Inclusions Acting as Precipitation Sites for MnS in Steel |
1 |
| Effects of Calcium Concentration on Room Temperature Formability and Damping Properties of Rolled Mg-Ca Alloys |
1 |
| Fabrication and Properties of PIT Processed Iron-Based Ba-122 Superconducting Tapes Using Double Sheath of Stainless Steel and Ag-Sn Alloy |
1 |
| Surface Reforming of Ti Wire by Dipping Heating of Ti Wire into Pure Ni, Ni/Ti, Ni/Al Mixed Powders |
0 |
| Martensitic Transformation Induced at Low and High Temperatures on Ti-15V-7Al Alloy |
0 |
| Analyzing of Reaction Mechanisms of Cu-Al Intermetallic Compounds in Dipping Experiment of Cu Wire and Cu Plate into Al Melt by Cylindrical Reaction Model and Flat Plate Model - In Order to Analyze the Combustion Synthesis of Cu-Al Intermetallic Compounds |
0 |
| Pulsed Electric Current Sintering of FeS Powder |
0 |
| Fabrication of TiO2/SiO2 Composite Coating via a High-Temperature Self-Organizing Porous TiO2 Layer on Ti |
0 |
| In-Situ Characterization of Dendrite Tip Radius in Sn-Base Alloys |
0 |
| Quantitative Analysis of the Preferential Orientation of Collagen and Elastin Fibers in Blood Vessel with an Imaging Methodology Combined with Birefringence Measurement |
0 |
| Dependence of Load Angle on Static Strength of Resistance Spot Welded Lap Joint in Combined Load Test |
0 |
| Microstructure and Critical Current of Commercially Available Coated Conductors (Rare-Earth-Based Superconducting Tapes) |
0 |
| Flux Pinning Properties in Y2BaCuO5-Doped YBa2Cu3Oy Films Fabricated with Vapor-Liquid-Solid Growth Method |
0 |
| Development of Highly Pure Polycrystalline Superconducting MgB2 Bulks by Mg Vapor Transport (MVT) Method |
0 |
| Deposition Temperature Dependence of Vortex Pinning Property in YBa2Cu3O7+BaHfO3 Film |
0 |
| In-Field J(c) Properties in the Longitudinal Magnetic Field of BaHfO3-Doped-Multilayered SmBa2Cu3Oy Films on Metal Tapes for the Cable Application |
0 |
| Developments of Ag-Sheath Bi-2223 Wire |
0 |
| New Microstructure Control for Internal Tin Processed Nb3Sn Wires through Element Addition to Matrix |
0 |
| Preparation of Ti-Al-N-O Ceramics by Mechanical Alloying and Spark Plasma Sintering |
0 |
| Effect of Metal Structure on Damping Characteristics of Cymbals |
0 |
| Powder Properties of Ag Nanoparticles Prepared by Arc Plasma Method |
0 |
