| Convection of heat and thermodynamic irreversibilities in two-phase, turbulent nanofluid flows in solar heaters by corrugated absorber plates |
43 |
| Magnetically recoverable highly efficient visible-light-active g-C3N4/Fe3O4/Ag2WO4/AgBr nanocomposites for photocatalytic degradations of environmental pollutants |
42 |
| Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel's fully-mechanized working face |
42 |
| Mathematical modeling of heat and mass transfer effects on MHD peristaltic propulsion of two-phase flow through a Darcy-Brinkman-Forchheimer porous medium |
39 |
| Deposition of CuWO4 nanoparticles over g-C3N4/Fe3O4 nanocomposite: Novel magnetic photocatalysts with drastically enhanced performance under visible-light |
39 |
| Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity |
38 |
| A study on the dust control effect of the dust extraction system in TBM construction tunnels based on CFD computer simulation technology |
34 |
| Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger |
33 |
| Research on mine dust suppression by spraying: Development of an air-assisted PM10 control device based on CFD technology |
32 |
| Simulation experiments on the controllability of dust diffusion by means of multi-radial vortex airflow |
30 |
| The effect of anionic surfactant (SDS) on pore-fracture evolution of acidified coal and its significance for coalbed methane extraction |
30 |
| Numerical investigation of natural convection of Al2O3-water nanofluid in a wavy cavity with conductive inner block using Buongiorno's two-phase model |
27 |
| Mixed convection of non-Newtonian nanofluid in an H-shaped cavity with cooler and heater cylinders filled by a porous material: Two phase approach |
27 |
| Effects of [Bmim][Cl] ionic liquid with different concentrations on the functional groups and wettability of coal |
24 |
| Fabrication of novel ZnO/BiOBr/C-Dots nanocomposites with considerable photocatalytic performances in removal of organic pollutants under visible light |
24 |
| Enhanced photocatalytic degradation performance of organic contaminants by heterojunction photocatalyst BiVO4/TiO2/RGO and its compatibility on four different tetracycline antibiotics |
23 |
| Joule heating and buoyancy effects in electro-osmotic peristaltic transport of aqueous nanofluids through a microchannel with complex wave propagation |
23 |
| Eggshell nano-particle potential for methyl violet and mercury ion removal: Surface study and field application |
23 |
| ROS mediated destruction of cell membrane, growth and biofilms of human bacterial pathogens by stable metallic AgNPs functionalized from bell pepper extract and quercetin |
22 |
| Oxygen-rich TiO2 decorated with C-Dots: Highly efficient visible-light-responsive photocatalysts in degradations of different contaminants |
21 |
| Alloying behaviour, thermal stability and phase evolution in quinary AlCoCrFeNi high entropy alloy |
21 |
| A facile method to prepare size-tunable silver nanoparticles and its antibacterial mechanism |
20 |
| One-pot green synthesis of magnesium oxide nanoparticles using Penicillium chrysogenum melanin pigment and gamma rays with antimicrobial activity against multidrug-resistant microbes |
19 |
| Modern synthesis strategies for hierarchical zeolites: Bottom-up versus top-down strategies |
19 |
| Application of oak powder/Fe3O4 magnetic composite in toxic metals removal from aqueous solutions |
19 |
| Optimum milling parameters for production of highly uniform metal-matrix nanocomposites with improved mechanical properties |
19 |
| Effect of the inlet angle on the performance of a cyclone separator using CFD-DEM |
18 |
| An investigation of the nozzle's atomization dust suppression rules in a fully-mechanized excavation face based on the airflow-droplet-dust three-phase coupling model |
17 |
| Synthesis of Na-X zeolite from low aluminum coal fly ash: Characterization and high efficient As(V) removal |
17 |
| Simulation analysis and engineering application of distribution characteristics about multi-stage atomization field for cutting dust in fully mechanized mining face |
17 |
| Modeling thermal conductivity enhancement of metal and metallic oxide nanofluids using support vector regression |
17 |
| Comparison of breakage models in DEM in simulating impact on particle beds |
16 |
| Superior capacitive behavior of porous activated carbon tubes derived from biomass waste-cotonier strobili fibers |
16 |
| Exceptional photocatalytic activity for g-C3N4 activated by H2O2 and integrated with Bi2S3 and Fe3O4 nanoparticles for removal of organic and inorganic pollutants |
16 |
| Green synthesis of copper oxide nanoparticles and its effective applications in Biginelli reaction, BTB photodegradation and antibacterial activity |
16 |
| The effect of inclination angle and hot wall configuration on Cu-water nanofluid natural convection inside a porous square cavity |
16 |
| Understanding the morphological effects of WO3 photocatalysts for the degradation of organic pollutants |
16 |
| Improve the thermal performance of the pillow plate heat exchanger by using nanofluid: Numerical simulation |
16 |
| Effect of nonlinear thermal radiation on 3D magneto slip flow of Eyring-Powell nanofluid flow over a slendering sheet with binary chemical reaction and Arrhenius activation energy |
15 |
| Numerical investigation of turbulent Cu-water nanofluid in heat exchanger tube equipped with perforated conical rings |
15 |
| Variability in rheology of cemented paste backfill with hydration age, binder and superplasticizer dosages |
15 |
| Biosynthesis of tin oxide (SnO2) nanoparticles using jujube fruit for photocatalytic degradation of organic dyes |
15 |
| Large-scale GPU based DEM modeling of mixing using irregularly shaped particles |
14 |
| Experimental investigation of the wetting ability of surfactants to coals dust based on physical chemistry characteristics of the different coal samples |
14 |
| Application of response surface methodology with a Box-Behnken design for struvite precipitation |
14 |
| Kinetics and equilibrium isotherms of adsorption of Pb(II) and Cu(II) onto raw and arginine-modified montmorillonite |
14 |
| Hydrothermal synthesis of NH2-UiO-66 and its application for adsorptive removal of dye |
14 |
| Increasing the amorphous yield of {(Fe0.6Co0.4)(0.75)B0.2Si0.05}(96)Nb-4 powders by hot gas atomization |
14 |
| Enhanced photocatalytic degradation of industrial dye by g-C3N4/TiO2 nanocomposite: Role of shape of TiO2 |
13 |
| CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: Effect of different configurations |
13 |
