| High-performance ceramic parts with complex shape prepared by selective laser sintering: a review |
22 |
| Study on the replacement of the hydrated lime by kaolinitic clay in mortars |
18 |
| Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges |
10 |
| Progress in pressureless sintering of boron carbide ceramics - a review |
8 |
| The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood |
8 |
| In situ synthesis of ZrB2-ZrC-SiC ultra-high-temperature nanocomposites by a sol-gel process |
7 |
| Introduction to H2020 project C(3)HARME - next generation ceramic composites for combustion harsh environment and space |
7 |
| Wear performance of self-glazed zirconia crowns with different amount of occlusal adjustment after 6 months of clinical use |
7 |
| Ultra-high temperature ceramic composite |
6 |
| The toughening mechanism and mechanical properties of graphene-reinforced zirconia ceramics by microwave sintering |
5 |
| Effect of calcium carbonate on the preparation of glass ceramic foams from water-quenched titanium-bearing blast furnace slag and waste glass |
5 |
| Recent advances in the study of high-temperature behaviour of non-stoichiometric TaCx, HfCx and ZrCx carbides in the domain of their congruent melting point |
5 |
| Phase transformations in oxides above 2000 degrees C: experimental technique development |
5 |
| Uranium nitride-silicide advanced nuclear fuel: higher efficiency and greater safety |
5 |
| Synthesis of hierarchically porous mullite ceramics with improved thermal insulation via foam-gelcasting combined with pore former addition |
5 |
| Grinding and polishing efficiency of a novel self-glazed zirconia versus the conventional dry-pressed and sintered zirconia ceramics |
4 |
| Effects of magnesium doping on the properties of hydroxyapatite/sodium alginate biocomposite |
4 |
| Synthesis, characterisation and dielectric properties of low-loss Zr-doped barium strontium titanate materials |
4 |
| Thermal properties of La2Zr2O7 double-layer thermal barrier coatings |
4 |
| Testing ultra-high-temperature ceramics for thermal protection and rocket applications |
4 |
| In situ synthesis, mechanical and cyclic oxidation properties of Ti3AlC2/Al2O3 composites |
4 |
| Low temperature upcycling of vitreous byproduct of the MSW plasma processing into multifunctional porous glass-ceramics |
4 |
| Effect of strontium doping on structural and dielectric behaviour of barium titanate nanoceramics |
4 |
| Preparation of Al2O3-SiC composite powder from kyanite tailings via carbothermal reduction process |
4 |
| The influence of microstructure on the mechanical properties of polycrystalline diamond: a literature review |
4 |
| Zrc ceramics incorporated with different-sized SiC particles |
3 |
| Effect of calcining temperature on the microstructure and magnetic properties of CuFeO2 multiferroic ceramic |
3 |
| Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering |
3 |
| Aluminosilicate phosphate cements - a critical review |
3 |
| Nanovoids in dense hydroxyapatite ceramics after electric field assisted sintering |
3 |
| Microstructural evolution and micromechanical properties of thermally sprayed hydroxyapatite coating |
3 |
| Joining of SiC ceramic by using the liquid polyvinylphenylsiloxane |
3 |
| Room temperature R-curve and stable crack growth behaviour of ZrB2-SiC ceramic composites |
3 |
| Influence of different surface treatments on zirconia/resin shear bond strength using one-bottle universal adhesive |
3 |
| Bonding of novel self-glazed zirconia dental ceramics |
3 |
| Tougher zirconia nanoceramics with less yttria |
3 |
| Dense and strong ZrO2 ceramics fully densified in <15 min |
2 |
| Digital dentistry calls the change of ceramics and ceramic processes |
2 |
| Ba0.9Ca0.1TiO3: microwave-assisted hydrothermal synthesis and piezoelectric properties |
2 |
| Enhanced copper removal from aqueous solution by hydrous TiO2/zeolite composite |
2 |
| Structural and dielectric relaxor properties of Ba1-xMgxTiO3 ceramics prepared through a hydrothermal route |
2 |
| Environmental blue CoAl2O4 pigment co-doped by Zn2+ and Mg2+: synthesis, structure and optical properties |
2 |
| Sintering mechanism of high-intensity and low-density ceramic proppants prepared by recycling of waste ceramic sands |
2 |
| Effect of the addition of silica sol on layered extrusion forming of Al2O3-based cores |
2 |
| Reactive carbothermal reduction of ZrC and ZrOC using Spark Plasma Sintering |
2 |
| Influence of zirconium-based alloys on manufacturing and mechanical properties of ultra high temperature ceramic matrix composites |
2 |
| Pressureless sintering of multilayer graphene reinforced silicon carbide ceramics for mechanical seals |
2 |
| beta-Tricalcium phosphate silica aerogel as an alternative bioactive ceramic for the potential use in dentistry |
2 |
| Preparation of CaO granules using the granulation method |
2 |
| Technology and electrophysical properties of the (K0.44Na0.52Li0.04)(Nb0.9-xTa0.1Sbx)O-3 ceramics |
2 |
